Loading...
HomeMy WebLinkAbout17216 51st Ave Ne_BLD5689_2026 i SIGN PERMIT APPLICATION ` Community and Economic Development City of Arlington• 18204 59th Ave NE•Arlington,WA 98223 • Phone(360) 403-3551 This application is for new, refaced, modification of existing sign, or removal of sign(s). If your building or development has a Master Sign Program,please use the Master Sign Application. ELECTRONIC FILES SUBMITTAL REQURIEMENTS: I]STRUCTURAL CALCULATIONS (where applicable) I]COMPLETE PLANS F1 SITE PLAN -All existing and proposed signs need to be shown on the site plan. MULTI-TENANT: ZI Is the building occupied by more than one tenant? 0 Yes ❑No F1 Number of tenants and/or available business spaces on property: ❑Is there a City-approved Master Signage Plan for the building?If so,what is the file number: IF A TENANT OR LESSEE: a letter from the property owner or Lease Agreement stating the following: ❑Permission for sign installation. IF HANGING,CANOPY,MARQUEE OR PROJECTING SIGNS OVER PUBLIC RIGHT-OF-WAY: ❑Distance from curb. ❑Measurement from grade to bottom of the sign. ❑Right-of-Way Hold Harmless Agreement. ❑Right-of-Way Use Permit. Type of Permit: ❑ New Sign ❑ Modification of Existing Sign ❑ Sign Removal Type of Sign: ❑ Wall Sign ❑ Window Sign ❑ Freestanding Sign ❑ Hanging Sign ❑ Marquee Sign ❑ Canopy Sign ❑ Projecting Sign Illumination: ❑ No Illumination ❑ Interior Illumination ❑ External Illumination ❑ Readerboard Property Address: 17216 51 st Ave NE/4407 172nd ST NE Suite Number: Project Valuation: 250 Preferred Contact: ❑ Owner 0 Contractor Scope of Work: Master Sign Plan for Buidling B Business Name: SmartCap Business Phone No.: Owner/Applicant Name: Mike Balicki Phone No.: Email Address: mbalicki@smartcapgroup.com Cell No.: (206) 584-5257 Mailing Address: 8201 164th Ave NE, Suite 105 City:Redmond State: WA Zip:98052 Contractor Name. NW Signs / Tracie Skiles Office No.: Email Address: tracie@nwsigns.com Cell No.: 425-280-8269 Mailing Address: 17201 Beaton Rd City: Monroe State: WA Zip: 98272 L&I Contractor License Number: NWSIGS*84201 Expiration Date: 10/7/24 REV2022 Page 1 of 3 BUILDING INFORMATION Zoning Designation: BP Zoning Overlay Designation: Building Total Length: 935 Building Total Square Footage: 166750 Total Number of Suites: 17 How many floors contain Suites for lease: 1 Is the development located on a corner lot? ❑ Yes 0 No Is the development located on a lot that is bordered by two public streets? ❑ Yes 0 No If yes, do the streets intersect at the lot's boundaries? ❑ Yes ❑ No EXISTING SIGNS ASSOCIATED WITH THE BUSINESS WALL(W), CANOPY(C), HANGING(H), MARQUEE(M), PROJECTING(P) OR FREESTANDING(F) Suite# Type Facade Height x Width - Square Company Removal of Sign (N,S,E,W) Footage Name x = ❑Yes ❑No x = ❑Yes El No x = ❑Yes El No x = El Yes El No x = ❑Yes El No EXISTING SIGNS ON-SITE: Exclude Proposed Signs WALL(W), CANOPY(C), HANGING(H), MARQUEE(M), PROJECTING(P) OR FREESTANDING(F) Suite# Type Facade Height x Width - Square Company Removal of Sign (N,S,E,W) Footage Name x = ❑Yes ❑No x = ❑Yes ❑No x = ❑Yes ❑No x = ❑Yes ❑No x = ❑Yes ❑No x = ❑Yes ❑No x = ❑Yes ❑No x = ❑Yes ❑No x = ❑Yes ❑No x = ❑Yes ❑No x = ❑Yes ❑No x = ❑Yes ❑No Total Square Footage of Existing Signage: Total#Removed: REV2022 Page 2 of 3 PROPOSED SIGNS WALL(W), CANOPY(C), HANGING(H), MARQUEE(M), PROJECTING(P) OR FREESTANDING(F) Suite# Type Facade Height x Width = Square Company Replacement of Sin N,S,E,W Footage Name x = ❑Yes ❑No x = ❑Yes ❑No x = ❑Yes ❑No x = ❑Yes ❑No x = ❑Yes ❑No Total Square Footage of Proposed Signage: Total#Replaced: FREESTANDING SIGN ❑ Two-Sided ❑ Two-Sided"V" ❑ Multi-Sided ❑ Three Dimensional What is the length of public street frontage adjacent to the development? x 0.3= Sign Face (north,south,east,west) Height x Width x Length = Square Footage 1. x x = 2. x x = 3. x x = Total Square Footage: See Assistance Bulletin#34 for additional information on calculating allowed square footage of signs. Standard Calculation for single business sign allowance: First floor square footage(so of the space the business occupies: x 0.025 = Total sf allowed. Alternate Calculation for single business sign allowance: Lineal feet of the frontage space the business occupies: x 1.5= Total sf allowed. Freestanding Sign Calculation Length of public street frontage adjacent to the development: x 0.3 = Total sf allowed per side. Length of public street frontage adjacent to the development: x 0.75 = Total sf allowed per side Highway Commercial Zone Only. 1 hereby certify that 1 am the ❑ Owner, ✓❑ Contractor and authorized to sign this application and that the above information is correct and that the construction on, and the occupancy and the use of the above described property will be accordance with the laws, rules and regulations of the State of Washington and the City ofArlington. Trade Skiles 11 /2/23 Signature Print Name Date REV2022 SAVE PRINT Page 3 of 3 Master Sign Plan Arlington Airport Industrial Park 17216 5V Ave NE/4407 172"d St NE Building B Parcel number: 31052100400100 Zoned—BP All Tenant signage is subject to the Landlord's written approval.The Landlord's approval shall be based on the following criteria: Freestanding Signs/Entrance Sign—Furnish and installed by landlord only. How many allowed—1 freestanding monument sign anticipated to be installed, maximum monument signs per development is 1. One monument sign each for Building A. Height- Freestanding sign can be 6' in height. Sign area—Since the frontage is 660'x .3 = 197.7 square footage of sign area, although the max area is 100 square feet per face. 20.68.654 Non-Residential Subdivision Entrance Signs.At any entrance to a non-residential subdivision there may be not more than one sign identifying the businesses located in such subdivision. A single side of any such sign may not exceed sixty square feet. Such sign area shall not be counted in the individual businesses Freestanding Sign Surface Area. Setback as seen in diagram: aFAR vs ON 7FaRPOW Nn 51cM WUMnM AFWA) .4 KA"cw a•ai y !■ K Na SIGN WW"N TRIANGLE Tenant Exterior Building Signage • Sign area-The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major projections such as awnings, on which the sign is located. • The maximum sign surface area permitted on any building or individual leased space within a building in the BP zone shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. (c)The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major projections such as awnings, on which the sign is located. • All signs must be channel letters attached to a raceway or for non-lit letters attached to a rail, (raceway and rails to be the same color as building surface behind/adjacent to rail). • Wording of signs shall not include the product or service sold except as part of the Tenant's trade name or insignia. MasterCard/VISA or product trademarks shall be prohibited. • The design of all signs, including style and placement of all lettering, size, color, materials, method of illumination, shall be subject to the approval of the Landlord as well as AHJ. • Tenant signage to maintain cohesive look/feel to the building with similar style • For buildings with more than one story—No sign may be placed higher than the second story windowsill level, except for upper floor window signs only for businesses located exclusively above first floor. • No flush-mounted wall sign attached to a building may project more than twelve inches from the building of the wall. Channel Letters on a Raceway Non-lit letters on a rail 14 SIGN A ■■,I 1■ Sign Placement Tenant Exterior Signage—Shop Drawing Requirements • All drawings to be fully dimensions and drawn to scale • Elevation drawing required to show leasehold area and proposed sign placement • A end view detail to show illumination, depth of letters and attachment methodology • Transformer size and amp load to be computed and shown on drawing Tenant Exterior Signage—Construction Requirements • Fabrication of signs shall comply with both the intent of the sign detail provided as well as the actual building condition. • All exterior signs, bolts,fastenings, and clips shall be of non-rusting materials such as enamel, stainless steel, aluminum, brass or bronze. No ferrous materials of any type will be permitted. • All conductors,transformers and other equipment shall be concealed in raceways constructed according to the Landlord Sign Detail. 15 mm neon tubing shall be the maximum diameter. Transformers are to be on a GFI circuit with maximum output of 9,000 volts. No exposed wiring running between individual letters shall be allowed. Amp load shall be computed and shown on drawing. All signs shall be fabricated in and installed by U. L.-certified shops, and all signs shall comply with all local building and electrical codes. • All letters&signs exposed to the weather shall be mounted in alignment with the raceway. • Each sign shall be labeled to comply with local ordinances; typically,this will include underside mounting of identification of the power disconnect,the UL labeling, and the sign company. Only the company label required by local ordinances is permitted, and it shall be applied in an inconspicuous location. • Sign contractor shall repair any damage to property or building caused by his work. No penetrations of the wall shall be made by the Tenant without written authorization of the Landlord. • Tenant shall be fully responsible for the operations of Tenant's sign contractors. Back of buildings • Tenant name and unit number is allowed on the back service/man door with vinyl, no other signs allowed. o Lettering to be centered on door, 5 feet above finished floor o Landlord will install lettering. Signs prohibited • Individual letters, all signs shall be on a raceway/or rail • Except as provided herein, no advertising placard, banners, pennants, names, insignia, trademarks or other descriptive material to be affixed or maintained upon the glass panels and supports of the windows or doors or on the exterior wall of the building unless specifically approved by the Landlord. • Tenants are prohibited from taping standard paper signs to the exterior building • Cabinet sign Illumination • Signs may be illuminated; however,they must be shielded so that if illuminates only the face of the sign and not shine directly into the public right of way or the sky. • If illuminated, signs must be on a 7-day, 24-hour timer that causes the sign to be lit during all normal operational hours. Landlord reserves the right to modify illumination hours. • No signs or illuminated tubing or strings of lights may contain or be illuminated by flashing or intermittent lights or lights changing degrees of intensity. • No sign within one hundred fifty feet of a residential zone may be illuminated between the hours of midnight and six a.m., unless the impact of such lighting beyond the boundaries of the lot where it is located is entirely inconsequential. • Lighting directed toward a sign shall be shielded so that it illuminates only the face of the sign and does not shine directly into a public right-of-way, residential premises, or into the sky. • Except for temporary signs erected in connection with the observance of holidays, no sign or illuminated tubing or strings of lights may contain or be illuminated by flashing or intermittent lights or lights of changing degrees of intensity, except electronic readerboards or signs indicating the time, date or weather conditions. The Tenant and Sign Contractor will not be permitted to commence installation of the exterior sign unless all the following conditions have occurred: • An approved set of final drawings reflecting the Landlord's approval shall be on file in the Landlord's office. • Tenant and their Sign Contractor shall be responsible for the securing of all applicable sign permits required by the local authorities prior to fabrication of the signs.The Landlord's approval is required on all plans prior to the application for permit. • The Landlord reserves the right to revise this Signage Criteria in accordance with Arlington Sign Ordinance for up to thirty(30) days before the Tenant's Rent Commencement date. However, this Signage Criteria may be revised at any time if so required by any government agency having jurisdiction over its contents. • Tenant is responsible for all permitting and installation of all signage • All exterior tenant signage shall be constructed and installed at Tenants expense • Tenant is responsible for ongoing maintenance and good appearance of signage. • Tenant is responsible for all removal, repairs, patching, sealing, and painting of wall upon lease termination o The removal of signs from said property within (15) days of the expiration and non- renewal of the Tenant's lease is the responsibility of the tenant.At this time, it is also the Tenant's responsibility to restore the building to the condition of the existing prior to the sign installation Sign Schedule Sign # Description M1 1 Monument 6' and max sgft 100 per face-with Building A The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W19 projections such as awnings, on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W19 projections such as awnings, on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W20 projections such as awnings, on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W21 projections such as awnings, on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W22 projections such as awnings, on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W23 projections such as awnings, on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W24 projections such as awnings, on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W25 projections such as awnings, on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W26 projections such as awnings, on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W27 projections such as awnings, on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W28 projections such as awnings, on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W29 projections such as awnings, on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W30 projections such as awnings, on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W31 projections such as awnings, on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W32 projections such as awnings, on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W33 projections such as awnings, on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W34 projections such as awnings, on which the sign is located. v v H�1NV � C C N O C I � Q T O - � V O O o- 18 8 I I I '1 _ � I H�ivry it I z j I W I Z W N Z O F- �o p o - VI� �- ss _ —— _ 1. s t • I o n 9Z .YZ- - : ,n m .6 ,O6 ,6 W.S9 .9-.lZ � o • I I ai I N n I _ __ o0000000 I _ I i fq I O g M Q D C II n� � M O a D N 3 a I I I I I r Q D I I a - L 31� 6 D mm OIL I a I 3 a Y I ao n a D - I I p k o l 3 a41 o00 oho =oR N la D II I N la D - I � vl r N' I �I s I n a J I I o # I � I N I I a LL ' N I so I 3 I - a D - I _ I : I' Ll qo oogoo — ----- 000ga ¢ I d e ,0fi ,6 fi / I L.J'- H_a e s Til' i S N O OK c,r ��cf "' • N �--� � Q J Z LLN oo 0 CD LL ul o� J d M I mLL N . � � . Qz m NN v LY $ N J� H m - � �J LL LL LL LL LL LL LL LL LL LL LL LL LL LL LL LL w cn u) co cn co u) u) co cn co u) (n co cD cn co W N M N N N N (D N N N N N M I ICjLn uj r 2 O O ER ci O r N O O O O O a r V j�K m N O cp <O [O t0 O W O [O t0 <O IO O N eb FN 001 IIO'J_ LLOY_IOf)_ O T OJ IOf)_ YO'J_IOt)_IOfi_ N f0 Lu rn rn rn t» Cn aJ rn w II Lu m Ili In N , j O Q M M M M M M M M M M M M M M M Ly M M M M M M M M M M M M M M M J LL p O O O O O O O O O O O O O O O Q (6 N Q O O O O O O O O O O O O O O O H j K Q In 1n In In to In In In In Ln In In In N In O - 3 � 000000000000000 CD 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 C6 �� S N J lL IL LL LL LL LL Li LL LL LL LL lL LL lL LL LL !� uS N N N N N M_ LLS N N N N ICJ r In to N (O•J �lOfJ � N � T W C�9 N l0(J � N �M N j K Q t0 a a a a 7 a O rD N w N wrnrnm airnmoirn N � W m ca Q O N M I() fD r W W O N M N C6 N m LL IL LL LL N N M C4 y � m v Lr I m Go Q j co W w <W fi co Q a,¢ Q W ° �--�— — —— z z w p m -- - oo co2 u) m m =I U K ri Master Sign Plan Arlington Airport Industrial Park 17212 51n Ave NE/4407 172"d St NE Building B Parcel number:31052100400100 Zoned—BP All Tenant signage is subject to the Landlord's written approval.The Landlord's approval shall be based on the following criteria: Freestanding Signs/Entrance Sign—Furnish and installed by landlord only. How many allowed—1 freestanding monument sign anticipated to be installed, maximum monument signs per development is 1.One monument sign each for Building A. Height-Freestanding sign can be 6' in height. Sign area—Since the frontage is 660'x .3=197.7 square footage of sign area, although the max area is 100 square feet per face. 20.68.654 Non-Residential Subdivision Entrance Signs.At any entrance to a non-residential subdivision there may be not more than one sign identifying the businesses located in such subdivision.A single side of any such sign may not exceed sixty square feet.Such sign area shall not be counted in the individual businesses Freestanding Sign Surface Area. Setback as seen in diagram: CITY OF ARLINGTON BUILDING DEPARTMENT APPROVE® • �i MLI(Y g1a1 - Norm[ FTJ, DATE BY BL 30 _ NO CHANGES AUTHORIZED NO S GN VWR-UN TFMNGLE UNLESS APPROVED BY THE BUILDING INSPECTOR Tenant Exterior Building Signage • Sign area-The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major projections such as awnings,on which the sign is located. • The maximum sign surface area permitted on any building or individual leased space within a building in the BP zone shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. (c)The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major projections such as awnings,on which the sign is located. • All signs must be Channel lepers attached to a raceway or for non-lit letters attached to a rail, (raceway and rails to be the same color as building surface behind/adjacent to rail). • Wording of signs shall not include the product or service sold except as part of the Tenant's trade name or insignia. MasterCard/VISA or product trademarks shall be prohibited. The design of all signs,including style and placement of all lettering,size,color, materials, method of illumination,shall be subject to the approval of the I andlord as well as AHJ. • Tenant signoge to maintain cohesive look/feel to tho building with similar style • For buildings with more than one story—No sign may be placed higher than the second story windowsill level,except for upper floor window signs only for businesses located exclusively above first floor. No flush-mounted wall sign attached to a building may project more than twelve inches from the building of the wall. .+'4 channel Letters on a Raceway Non-lit letters on a rail f i - �. Q t. Sign Placement Tenant Exterior Signage—Shop Drawing Requirements • All drawings to be fully dimensions and drawn to scale • Elevation drawing required to show leasehold area and proposed sign placement • A end view detail to show illumination, depth of letters and attachment methodology • Transformer size and amp load to be computed and shown on drawing Tenant Exterior Signage—Construction Requirements • Fabrication of signs shall comply with both the intent of the sign detail provided as well as the actual building condition. • All exterior signs, bolts,fastenings, and clips shall be of non-rusting materials such as enamel, stainless steel, aluminum, brass or bronze. No ferrous materials of any type will be permitted. • All conductors,transformers and other equipment shall be concealed in raceways constructed according to the Landlord Sign Detail. 15 mm neon tubing shall be the maximum diameter. Transformers are to be on a GFI circuit with maximum output of 9,000 volts. No exposed wiring running between individual letters shall be allowed. Amp load shall be computed and shown on drawing.All signs shall be fabricated in and installed by U. L. certified shops,and all signs shall comply with all local building and electrical codes. • All letters&signs exposed to the weather shall be mounted in alignment with the raceway. • Each sign shall be labeled to comply with local ordinances;typically,this will include underside mounting of identification of the power disconnect,the UL labeling,and the sign company.Only the company label required by local ordinances is permitted, and it shall be applied in an inconspicuous location. • Sign contractor shall repair any damage to property or building caused by his work. No penetrations of the wall shall be made by the Tenant without written authorization of the Landlord. • Tenant shall be fully responsible for the operations of Tenant's sign contractors. Back of buildings • Tenant name and unit number is allowed on the back service/man door with vinyl, no other signs allowed. o Lettering to be centered on door,5 feet above finished floor o Landlord will install lettering. Signs prohibited • Individual letters, all signs shall be on a raceway/or rail • Except as provided herein, no advertising placard, banners, pennants, names, insignia, trademarks or other descriptive material to be affixed or maintained upon the glass panels and supports of the windows or doors or on the exterior wall of the building unless specifically approved by the Landlord. • Tenants are prohibited from taping standard paper signs to the exterior building • Cabinet sign Illumination • Signs may be illuminated; however,they must be shielded so that if illuminates only the face of the sign and not shine directly into the public right of way or the sky. • If illuminated,signs must be on a 7-day,24-hour timer that causes the sign to be lit during all normal operational hours. Landlord reserves the right to modify illumination hours. • No signs or illuminated tubing or strings of lights may contain or be illuminated by flashing or intermittent lights or lights changing degrees of intensity. • No sign within one hundred fifty feet of a residential zone may be illuminated between the hours of midnight and six a.m., unless the impact of such lighting beyond the boundaries of the lot where it is located is entirely inconsequential. • Lighting directed toward a sign shall be shielded so that it illuminates only the face of the sign and does not shine directly into a public right-of-way, residential premises, or into the sky. • Except for temporary signs erected in connection with the observance of holidays, no sign or illuminated tubing or strings of lights may contain or be illuminated by flashing or intermittent lights or lights of changing degrees of intensity, except electronic readerboards or signs indicating the time, date or weather conditions. The Tenant and Sign Contractor will not be permitted to commence installation of the exterior sign unless all the following conditions have occurred: • An approved set of final drawings reflecting the Landlord's approval shall be on file in the Landlord's office. • Tenant and their Sign Contractor shall be responsible for the securing of all applicable sign permits required by the local authorities prior to fabrication of the signs.The Landlord's approval is required on all plans prior to the application for permit. • The Landlord reserves the right to revise this Signage Criteria in accordance with Arlington Sign Ordinance for up to thirty(30)days before the Tenant's Rent Commencement date. However, this Signage Criteria may be revised at any time if so required by any government agency having jurisdiction over its contents. • Tenant is responsible for all permitting and installation of all signage • All exterior tenant signage shall be constructed and installed at Tenants expense • Tenant is responsible for ongoing maintenance and good appearance of signage. • Tenant is responsible for all removal, repairs, patching,sealing,and painting of wall upon lease termination o The removal of signs from said property within (15)days of the expiration and non- renewal of the Tenant's lease is the responsibility of the tenant.At this time, it is also the Tenant's responsibility to restore the building to the condition of the existing prior to the sign installation Sign Schedule Sign # Description M1 1 Monument 6'and max sqft 100 per face-with Building A The rriaxirnurn sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W19 projections such as awnings, nn whirh the sign is InratPril The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W19 projections such as awnings,on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W20 projections such as awnings,on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W21 projections such as awnings,on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall,including windows and doors but excluding major W22 I projections such as awnings, on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W23 projections such as awnings,on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W24 projections such as awnings,on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However,in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W25 projections such as awnings,on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However,in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W26 projections such as awnings,on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However,in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W27 projections such as awnings,on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W28 projections such as awnings,on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area fur arty une wnu-nercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W29 projections such as awnings,on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W30 projections such as awnings,on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W31 projections such as awnings,on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W32 projections such as awnings,on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W33 projections such as awnings,on which the sign is located. The maximum sign surface area permitted on any building or individual leased space within a building in the BP zones shall be determined by multiplying the number of square feet of the first floor of the building or leased space by 0.025. However, in no case may the total sign surface area for any one commercial establishment exceed five hundred square feet. The sign surface area of any sign(s) located on a wall of a structure may not exceed twenty percent of the total surface area of the wall, including windows and doors but excluding major W34 projections such as awnings,on which the sign is located. � u c a; 0 rn c c ti;r- w a -10 V1 IT A U Ir 0 i i Ll o N 3 z 0 O ti .-• f ♦ �J �� i x�Y`s `J ���f� Cc 1 Y `'I I � �► nim , II1 co co N Wuj co — �I I— _ I I —s � I - € ` ►yl � -- --_..fir- C <] - Ci• . _ -�d'; f i* -1 s sa if Iif '� ••- -� •• b _'• •• Ube' � - �tt � I C 1 1 m r! 1 x I ! y N 4Il la I f J r 1 f I I I I =a L. let N ,� Q 3 Q _ W cl oo U) J N -- u, hoc N gym, 3 � LL � � LL LL LL LL LL LL LL LL LL LL LL LL LL m -- vi cn m w 0 ui ui ui w ui ui ui u3 u5 ui ui cn ui I11 "�' " m io m N m 2N m n cl; O h N _ � w - M - - MM - mM '� o oo � ssos0000 � � ss a a o � 00000000 � oSoo � m N LL LLLL* LL Li: LL LL LL LL LL LL LLU� LL LL LL T u5 ui 0 w 0 fn w to w w w w o w w fn N 6 N - N N N -- ai N O EJ � T Of m m W T Of Of �^� 1-44) m N O O O O O O O O O O O N M V �4 vi 0 \_/�'� • -1---_ ._. _♦ � �\.��, LL IL LL 11 c fn No N >m - 3 . of " � < I m < < — 0o ss mow 1 m m 7 U LL' • Permit#: 5689 Permit Date: 11/08/23 Permit Type: MASTER SIGN PROGRAM Project Name: SmartCap BLDG B Applicant Name: NW Signs Applicant Address: 17201 Beaton Rd Applicant,City, State, Zip: Monroe,WA 98272 Contact: Tracie Skiles Phone: 425-280-8269 Email: tracie@nwsigns.com Scope of Work: Master sign plan for building B Valuation: 250.00 Square Feet: 166750 Number of Stories: 1 Construction Type: 111B Occupancy Group: ID Code: CIC Permit Issued: Permit Expires: Form Permit Type: MASTER SIGN PROGRAM Status: IN PROCESS Assigned To: Kristin Foster Property Parcel# Address Legal Description Owner Name Owner Phone Zoning SMARTCAP ARLINGTON 301 AP- 31052100400100 17216 51 ST AVE NE AIRPORT AIRPORT INDUSTRIAL/ INDUSTRIAL MANUFACTURING PARK QOZB,LLC Contractors Contractor Primary Contact Phone Address Contractor Type License License# W Signs Tracie Skiles 4258446415 17201 Beaton Rd CONSTRUCTION Electrical NWSIGS*84201CONTRACTOR Contractor Plan Reviews Date Review Type Description Assigned To Review Status 11/08/2023 MASTER SIGN; PROGRAM BUILDING In Review MASTER SIG\ Approved with 11/08/2023 P1t��GRAM See note PLANNING pp Conditions Fees Fee Description Notes Amount Processingftechnology $25.00 Signs Valuation Permit Fee Only $100.00 Total $125.00 Notes Date Note Created By: 11/08/2023 Address on the application and plan(17212)is incorrect.Applicant revised the address and resent the documents. Kristin Foster Uploaded Files Date File Name 11/08/2023 17434628-�_ _0..31107 13LD5689 Agplication.pjf 11/08/2023 17434629-20231107 BLD5689 BLDGBMasterSignPlan.pff 11/08/2023 17433349-20231107 BLD5689 BLDGBMastcrSignPlan.pdf 11/08/2023 17433350-20231107 BLD5689 Agplicatiomp f CITY OF ARLINGTON 18204 59th Avenue NE,Arlington,WA 98223 INSPECTIONS: 360-403-3417-Permit Center: 360-403-3551 BUILDING PERMIT 17216 51ST AVE NE Permit#: 5689 PERMIT EXPIRES 180 DAYS AFTER Parcel#: 31052100400100 DATE OF ISSUANCE. Scope of Work:Master sign plan for building B Valuation:250.00 OWNER APPLICANT CONTRACTOR SMARTCAP ARLINGTON AIRPORT NW Signs NW Signs INDUSTRIAL PARK QOZB,LLC 8201 164TH AVE NW, SUITE 110 17201 Beaton Rd 17201 Beaton Rd REDMOND,WA 98052 Monroe,WA 98272 Monroe,WA 98272 425-280-8269 4258446415 LIC:NWSIGS*84201 EXP: 10/07/2024 MECHANICAL CONTRACTOR PLUMBING CONTRACTOR LIC#: EXP: LIC#: EXP: JOB DESCRIPTION PERMIT TYPE: MASTER SIGN PROGRAM CODE YEAR: 2018 STORIES: 1 CONST.TYPE: 111B DWELLING UNITS: OCC GROUP: BUILDINGS: OCC LOAD: PERMIT APPROVAL The issuance or granting of this permit shall not be construed to be a permit for,or approval of,any violation of this Code or any other ordinance or order of the City,of any state or federal law,or of any order,proclamation,guidance advice or decision of the Governor of this State.To the extent the issuance or granting of this permit is interpreted to allow construction activity during any period of time when such construction is prohibited or restricted by any state or federal law,or order,proclamation,guidance advice or decision of the Governor of this State,this permit shall not authorize such work and shall not be valid.The building official is authorized to prevent occupancy or use of a structure where in violation of this Code,any other City ordinances of this jurisdiction or any other ordinance or executive order of the City,or of any state or federal law,or of any order,proclamation, guidance advice or decision of the Governor.The building official is authorized to suspend or revoke this permit if it is determined to be issued in error or on the basis of incorrect,inaccurate or incomplete information,or in violation of any City ordinance,regulation or order,state or federal law,or any order,proclamation, guidance or decision of the Governor. I AGREE TO COMPLY WITH CITY AND STATE LAWS REGULATING CONSTRUCTION AND IN DOING THE WORK AUTHORIZED THEREBY;NO PERSON WILL BE EMPLOYED IN VIOLATION OF THE LABOR CODE OF THE STATE OF WASHINGTON RELATING TO WORKMEN'S COMPENSATION INSURANCE AND RCW 18.27. THIS APPLICATION IS NOT A PERMIT UNTIL SIGNED BY THE BUILDING OFFICIAL OR HIS/HER DEPUTY AND ALL FEES ARE PAID. IT IS UNLAWFUL TO USE OR OCCUPY A BUILDING OR STRUCTURE UNTIL A FINAL INSPECTION HAS BEEN MADE AND APPROVAL OR A CERTIFICATE OF OCCUPANCY HAS BEEN GRANTED.IBC 110/IRC 110. SALES TAX NOTICE: Sales tax relating to construction and construction materials in the City of Arlington must be reported on your sales tax return form and coded City of Arlington#3101. 1/30/2024 01/29/2024 Applicant Signature Date Building Official Date CONDITIONS ATTACHMENT FASTENERS SHALL BE INSPECTED AT TIME OF INSTALLATION.APROVED JOB COPY SHALL BE ONSITE FOR INSPECTIONS. CALL FOR INSPECTIONS. The property owner shall ensure that the construction project complies with all applicable zoning codes and regulations.The property owner shall also ensure that the construction project does not cause any adverse impact on the surrounding environment or community.The property owner shall be responsible for obtaining all necessary permits and approvals from the relevant authorities before commencing construction.The property owner shall ensure that the construction project complies with all applicable design review requirements. THIS PERMIT AUTHORIZES ONLY THE WORK NOTED.THIS PERMIT COVERS WORK TO BE DONE ON PRIVATE PROPERTY ONLY.ANY CONSTRUCTION ON THE PUBLIC DOMAIN(CURBS,SIDEWALKS,DRIVEWAYS, MARQUEES,ETC.)WILL REQUIRE SEPARATE PERMISSION. PERMIT FEES Date Description Fee Amount 01/29/2024 Processing/Technology $25.00 01/29/2024 Signs $100.00 Total Due: $125.00 Total Payment: $0.00 Balance Due: $125.00 CALL FOR INSPECTIONS Call by 3:30 pm for next day inspection,allow 48 hours for Fire Inspections When calling for an inspection please leave the following information: Permit Number,Type of Inspection being requested,and whether you prefer morning or afternoon INSPECTION INFORMATION IPass/Fail Permit#: 5689 Permit Date: 11/08/23 Permit Type: MASTER SIGN PROGRAM Project Name: SmartCap BLDG B Applicant Name: NW Signs Applicant Address: 17201 Beaton Rd Applicant, City, State, Zip: Monroe,WA 98272 Contact: Tracie Skiles Phone: 425-280-8269 Email: tracie@nwsigns.com Scope of Work: Master sign plan for building B Valuation: 250.00 Square Feet: 166750 Number of Stories: 1 Construction Type: 11113 Occupancy Group: ID Code: CIC Permit Issued: 01/30/2024 Permit Expires: 07/29/2024 Form Permit Type: MASTER SIGN PROGRAM Status: COMPLETE Assigned To: Kristin Foster Property Parcel# Address Legal Description Owner Name Owner Phone Zoning SMARTCAP ARLINGTON 301 AP- 31052100400100 17216 51 STAVE NE AIRPORT AIRPORT INDUSTRIAL/ INDUSTRIAL MANUFACTURING PARK QOZB,LLC Contractors Contractor Primary Contact Phone Address Contractor Type License License# NW Signs Tracie Skiles 4258446415 17201 Beaton Rd CONSTRUCTION COA 602 156 837 CONTRACTOR NW Signs Tracie Skiles 4258446415 17201 Beaton Rd CONSTRUCTION Electrical NWSIGS*84201 CONTRACTOR Contractor Plan Reviews Date Review Type Description Assigned To Review Status 11/08/2023 MASTER SIGN BUILDING Approved PROGRAM MASTER SIGN Approved with 11/08/2023 PROGRAM See note PLANNING Conditions Fees Fee Description Notes Amount Processing/Technology $25.00 Signs Valuation Permit Fee Only $100.00 Credit Card Service $3.75 Total $128.75 Attached Letters Date Letter Description 01/29/2024 Building Permit Payments Date Paid By Description Payment Type Accepted By Amount 01/29/2024 XBP Con£ $125.00 164326393 01/29/2024 Tim Fulton 164326393 Hannah Hardwick $3.75 Outstanding Balance $0.00 Notes Date Note Created By: 01/29/2024 Emailed the permit for signature. Kristin Foster 11/08/2023 Address on the application and plan(17212)is incorrect.Applicant revised the address and Kristin Foster resent the documents. Uploaded Files Date File Name 01/30/2024 18367872-20240130 BLD5689 IssuedPermit.pdf 01/29/2024 18330597-20240125 BLD5689 ApprovedMasterSignProgram.pdf 11/08/2023 17434628-20231107 BLD5689 Application.pdf 11/08/2023 17434629-20231107 BLD5689 BLDGBMasterSignPlan.pdf 11/08/2023 17433349-20231107 BLD5689 BLDGBMasterSignPlan.pdf 11/08/2023 17433350-20231107 BLD5689 Application.pdf Date: 05/27/2026 Permit#: 5689 Permit Date: 11/08/2023 Review Date: 11/08/2023 Permit Type: MASTER SIGN PROGRAM Review Type: MASTER SIGN PROGRAM Target Date: 12/06/2023 Scheduled Time: 00:00 Completed Date: 11/13/2023 Description: See note Review Status: Approved with Conditions Assigned To: PLANNING Time In: 00:00 Time Out: 00:00 Hours: 0.0 Notes 11/13/2023 Approved Please get building approval as well. Property Information Parcel#: 31052100400100 SMARTCAP ARLINGTON AIRPORT INDUSTRIAL PARK QOZB, LLC SMARTCAP ARLINGTON AIRPORT INDUSTRIAL 8201 164TH AVE NW, SUITE 110 PARK QOZB, LLC 17216 51 ST AVE NE REDMOND, WA 98052 Zoning: 301 AP- INDUSTRIAL/ MANUFACTURINGLot: 50213131ock: