HomeMy WebLinkAbout17931 59th Ave Ne_BLD5805_2026 CITY OF ARLINGTON
18204 59th Avenue NE,Arlington,WA 98223
INSPECTIONS:360-403-3417-Permit Center:360-403-3551
BUILDING PERMIT
17931 59TH AVE NE Permit#:5805
PERMIT EXPIRES 180 DAYS AFTER
Parcel#:31052200403100 DATE OF ISSUANCE.
Scope of Work:Fire Alarm Panel Replacement like and kind Valuation: 1500.00
yI APPLICANT CONTRACTOR
Arlington Advanced Manufacturing Park B+H F irc and Security B&H FIRE AND SECURITY LLC
3316 Fuhrman Ave E,Ste 200 PO Box 3711 PO BOX 3711
Seattle,WA 98102 Arlington,Wa,98223 ARLINGTON,WA 98223
3603227635 425-244-1445
LIC:603 612112 EXP:07/31/2023
LIC:BHFTRHF842KW EXP:05/16/2024
MECHANICAL CONTRACTOR PLUMBING CONTRACTOR
LIC#: EXP: LIC tt: FAP:
JOB DESCRIPTION
PERMIT TYPE: I Iltt,:ALAKM CODE YEAR: 2018
STORIES: I CONST.TYPE: 11113
DWELLING UNITS: OCC GROUP: F-1;Factory Mod Hazard
BUILDINGS: OCC LOAD:
r PERMIT APPROVAL
The issuance or granting of this permit shall not be construed to be a permit for,or approval of,any violation of this Code or any
other ordinance or order of the City,of any state or federal law,or of any order,proclamation,guidance advice or decision of the
Governor of this State.To the extent the issuance or granting of this permit is interpreted to allow construction activity during any
period of time when such construction is prohibited or restricted by any state or federal law,or order,proclamation,guidance advice
or decision of the Governor of this State,this permit shall not authorize such work and shall not be valid.The building official is
authorized to prevent occupancy or use of a structure where in violation of this Code,any other City ordinances of this jurisdiction or
any other ordinance or executive order of the City,or of any state or federal law,or of any order,proclamation,guidance advice or
decision of the Governor.The building official is authorized to suspend or revoke this permit if it is determined to be issued in error or
on the basis of incorrect,inaccurate or incomplete information,or in violation of any City ordinance,regulation or order,state or
federal law,or any order,proclamation,guidance or decision of the Governor.
I AGREE TO COMPLY WITH CITY AND STATE LAWS REGULATING CONSTRUCTION AND IN DOING THE WORK
AUTHORIZED THEREBY;NO PERSON WILL BE EMPLOYED IN VIOLATION OF THE LABOR CODE OF THE
STATE OF WASHINGTON RELATING TO WORKMEN'S COMPENSATION INSURANCE AND RCW 18.27.
THIS APPLICATION IS NOT A PERMIT UNTIL SIGNED BY THE BUILDING OFFICIAL OR HIS/HER DEPUTY AND
ALL FEES ARE PAID.
IT IS UNLAWFUL TO USE OR OCCUPY A BUILDING OR STRUCTURE UNTIL A FINAL INSPECTION HAS BEEN
MADE AND APPROVAL OR A CERTIFICATE OF OCCUPANCY HAS BEEN GRANTED.IBC110ARC110.
SALES TAX NOTICE:Sales tax relating to construction and construction materials in the City of Arlington must be reported on
your sales tax return form and coded City of Arlington#3101.
02/29/2024
A licant Signature Date Building Official Date
/
7
Approved job copy shall be onsite for inspections.Adhere to approved plans.Call for inspections.
The property owner shall ensure that the construction project complies with all applicable zoning codes and regulations.The property
owner shall also ensure that the construction project does not cause any adverse impact on the surrounding environment or
community.The property owner shall be responsible for obtaining all necessary permits and approvals from the relevant authorities
before commencing construction.The property owner shall ensure that the construction project complies with all applicable design
review requirements.
THIS PERMIT AUTHORIZES ONLY THE WORK NOTED.THIS PERMIT COVERS WORK TO BE DONE ON PRIVATE
PROPERTY ONLY. ANY CONSTRUCTION ON THE PUBLIC DOMAIN(CURBS,SIDEWALKS,DRIVEWAYS,
MARQUEES,ETC.)WILL REQUIRE SEPARATE PERMISSION.
Date Description Fee Amount
03/01/2024 Fire System Plan Review $100.00
03/01/2024 Credit Card Service $3.00
03/01/2024 Processing/Technology $25.00
03/01/2024 Fire Alarm System Permit $75.00
03/01/2024 FRCP/Transmitter-Replace $125.00
Total Due: $328.00
Total Payment: $328.00
Balance Due: $0.00
,ECTIONS
Call by 3:30 pm for next day inspection,allow 48 hours for Fire Inspections
When calling for an inspection please leave the following information:
Permit Number,Type of Inspection being requested,and whether you prefer morning or afternoon
_ ... ,
FIRE ALARM PERMIT APPLICATION
Community&Economic Development
City of Arlington• 18204 59th Ave NE•Arlington,WA 98223•Phone(360)403-3551
Type of Permit: ❑ New Installation Cal System Modification ❑ Phased Installllati(o�n(1
Property Address: 1793I 694f) AVe QE Project Valuation: I � �4y'00
Lot#: g` A 2 Parcel ID No.: Preferred Contact: O Owner CD/ontractor
Project Description: Pi fe nIUM ganef p apuyY�,�- u kp- aod Kam► �U
Owner Name: Ad\1e�Wd /M�anfae+LYAO QQY�—' Home No.: q
Email Address: I'le6f\U `tQ�lrY1D�o" gMaII ' ( Cell No.: y2c '��J�" r�D� 1
Mailing Address: l,q 31 5914,, Pt t NE City: Adln State: Zip: CN)22
Contractor Name: C1 rl�e CUY Office No.: �Q V'J�2^1 U3�
Email Address: }e)K- re • cow-) Cell No.:
Mailing Address: ?0 I�O IUr ,X City: l Irl State: WI" Zip: I$22
L&I Contractor License Number: 1NAF1I7 OF(b g2-KW Expiration Date: 5 ILP 1202q
SUBMITTAL REQUIREMENTS:
Provide Information on All Equipment to he Installed Prior to Installation
ELECTRONIC FILES AND TWO (2) SETS OF THE FOLLOW:
❑ Complete and Scaled Plans
❑ Specification Sheets
❑ Wiring Diagrams (Point to Point Wiring)
❑ Electrical Plans,if upplicable
NOTE: All Central Station Monitoring must be UL or FM listed.
I hereby certify that the above information is correct and that the construction on,and the occupancy and the use of
the above described property will be in accordance with the laws,rules and regulation of the State of Washington.
dW� k0:1� g,ro-,�fsa.fd 2 co
Signature Print me Date
FOR STAFF USE ONLY
PERMIT# ACCEPTED BY: DATE STAMP
REV12.2020 Page 1 of 2
FIRE ALARM SYSTEMS (105.7.3)
**DEVICES include separate individual portions of a Fire Alarm System such as: Initiating Devices,
Notification Appliances, Flow Switch,Supervisory Switches, Magnetic Door Hold-Open Devices, Remote
Annunciators, Pull Stations, Beam Detectors,and other such devices. (Each piece is one device)
PLAN REVIEW FEES-shall be paid at time of application submittal
Less than $5,000.00 = $100.00 (`fable 4-10)
$5,000.00&over—based on valuation (Plan Review Fee is 65%of Building Permit Fee Calculation per Table 4-1)
REINSPECTION / PHASED INSTALLATION INSPECTIONS
Submit Phasing Plan with Application - review and approval required
Sig t
SRI
Kim
r'
Reinspection/Phased Installation fee is charged per hour(1 hour minimum) $75.00
3
Number of Devices** Device Fee Subtotal
$
3 to 5 $125.00 = $
6 to 10 $175.00 = $
11 to 20 $225.00 = $
21 to 40 $300.00 = $
41 to 100 $375.00 = $
101 to 200 $475.00 = $
> 200 $500.00 plus$50.00 per 100 additional devices(round up)
Total Number of Devices = $500.00 + $ _ $
FACP/TRANSMITTER Modification $125.00 = $ IZ�•OU
PERMIT FEE SUBTOTAL $ ZOO.O(D
y ..
Number of Devices** Device Fee Subtotal
1 to 100 $350.00 = $
101 to 200 $475.00 = $
>200 $500.00 plus$50.00 per 100 additional devices(round up)
Total Number of Devices = $500.00 + $ _ $
FACP/TRANSMITTER New $200.00 = $
PERMIT FEE SUBTOTAL $
PERMIT FEE TOTAL $ 203.oc�
PLAN REVIEW FEE $
Processing/Technology Fee $25.00
TOTAL $ 2•Z S .C)O
REV12.2020 Page 2 of 2
Fire and Security,, LLC. PO BOX 3711
1F) �` ARLINGTON,WA 98223
I I I I I I I I I III Ill LIC.# BHFIRHF842KW
PH: 425-244-1445
2/6/2024
Arlington Advanced Manufacturing Park LLC
17931 59th Ave Ne
Arlington, WA 98223
Scope Of Work:
B&H Fire and Security proposes to replace the old Fire Alarm Control Panel with a new like and kind Fire
Alarm Control Panel. No modifications to building audible visual or any initiating devices at this time.
Construction Manager
Jeff Brossard
425.244.1445
DF-52416:D•A3-20
MS-5UD(E)/MS-10UD(E) Series Flre•LITerALarms
Five Zone Fire Alarm Control Panel
Ten Zone Fire Alarm Control Panel by Honeywell
General
The MS-5UD-3(E) is a five-zone FACP (Fire Alarm Control
Panel)and the MS-10UD-7(E)is a ten-zone FACP.These con-
trol panels provide reliable fire signaling protection for small to
medium-sized commercial, industrial, and institutional build-
ings. Both panels include built-in communicators for Central
Station Service and remote upload/download.
Each of these FACPs is compatible with System Sensor's
microprocessor-based i3 series detectors. These conventional
smoke detectors can transmit a maintenance trouble signal to
the FACP indicating the need for cleaning and a supervisory
"freeze" signal when the ambient temperature falls below the
detector rating. Additionally, both the MS-5UD-3 and MS-
10UD-7 are compatible with conventional input devices such
as two-and four-wire smoke detectors, pull stations,waterflow
devices, tamper switches, and other normally-open contact
devices. Refer to the Fire•Lite Device Compatibility Document LN
for a complete listing of compatible devices.
a
Outputs include four NACs (Notification Appliance Circuits),
three programmable Form-C relays (factory programmed for
Alarm,Trouble, and Supervisory)and 24 VDC special applica-
tion resettable and nonresettable power outputs. The FACPs
supervise all wiring, AC voltage, battery level and telephone —Strobe Synchronization for System Sensor, Wheelock,
line integrity. Gentex, Faraday,or Amseco devices.
Activation of a compatible smoke detector or any normally- —Selective Silence(horn-strobe mute).
open fire alarm initiating device will activate audible and visual
signaling devices, illuminate an indicating LED, sound the —Temporal or Steady Signal.
piezo sounder at the FACP, activate the communicator and —Silenceable or Nonsilenceable.
FACP alarm relay, and operate an optional module used to . Optional CAC-5X Style Z (Class A) Converter Module for
notify a remote station or initiate an auxiliary control function. NACs and IDCs(2 required for MS-10UD-7).
New options include a UL listed printer, PRN-6F and FireLite's • Form-C Relays for Alarm, Trouble and Supervisory - Con-
IPDACT Internet Monitoring module. The FireWatch Series tact Ratings 2.0 A@ 30 VDC or 0.5 A @ 30 VAC(resistive).
internet monitoring modules IPDACT-2 and IPDACT-2UD per- . 3.0 A total system current for MS-5UD-3.
mit monitoring of alarm signals over the Internet saving the 7.0 A total system current for MS-10UD-7.
monthly cost of two telephone lines.Although not required,the
secondary telephone line may be retained providing backup Optional Dress Panel DP 51050
communication over the public switched telephone line. • Optional Trim Ring TR-CE for semi-flush mounting.
NOTE: The MS-5UD-3E and MS-10UD-IF offers the same fea- • 24 volt operation.
tures as the MS-5UD-3 and MS-10UD-7 but allow connection to . Low AC voltage sense.
240 VAC. Unless otherwise specified,the information in this data
sheet applies to both the 120 VAC and the 240 VAC versions of Alarm Verification.
these panels. • PAS (Positive Alarm Sequence).
NOTE: For ULC-listed models,see DF-60440. • Automatic battery trickle charger.
• Up to eight ANN-BUS annunciators:
Features —Optional 8 zone Relay Module ANN-RLY.
• Listed to UL Standard 864,9th edition. —Optional LED Annunciator Module ANN-LED,
• Built-in DACT(Digital Alarm Communicator/Transmitter). —Optional Remote Annunciator ANN-80.
• Style B(Class B) IDC(Initiating Device Circuit) —Optional Remote Printer Gateway ANN-S/PG.
—MS-5UD-3-five IDCs. —Optional LED Annunciator Driver ANN-1/0.
—MS-10UD-7-ten IDCs. Optional 4XTMF module (conventional reverse polarity/city
• Style Y(Class B) NAC(Notification Appliance Circuit)-spe- box transmitter).
cial application power PROGRAMMING AND SOFTWARE:
—MS-5UD-3-four NACs. • Can be programmed at the panel with no special software
—MS-10UD-7-four NACs. or additional equipment.
• Notification Appliances may be programmed as • Programmable Make/Break Ratio.
—Silence Inhibit. • Upload/Download(local or remote)of program and data via
—Auto-Silence. integral DACT.
DF-52416:D•07/26/2010—Page 1 of 4
USER INTERFACE: • SYSTEM RESET(lamp test)
• Built-in DACT(Digital Alarm Communicator/Transmitter). • DRILL
• Integral 80-character LCD display with backlighting and
keypad. Terminal Blocks
• Real-time clock/calendar with automatic daylight savings AC Power—TB1:
adjustments. MS-5UD-3 (FLPS-3 Power Supply): 120 VAC, 50/60 HZ,
• ANN-BUS for connection to remote annunciators. 1.00 A.
• Audible or silent walk test capabilities. • MS-5UD-3E (FLPS-3 Power Supply): 240 VAC, 50 HZ,
• Piezo sounder for alarm,trouble,and supervisory. 0.54 A.
• MS-10UD-7 (FLPS-7 Power Supply): 120 VAC, 50/60 HZ,
Controls and Indicators 3.80 A.
LED INDICATORS • MS-10UD-7E (FLPS-7 Power Supply): 240 VAC, 50/60 HZ,
2.20 A.
• FIRE ALARM (red) Wire size: minimum 14 AWG (2.00 mm2)with 600 V insulation.
• SUPERVISORY(yellow) Supervised, nonpower-limited.
• TROUBLE(yellow) Battery(sealed lead acid only)—J12:
• AC POWER (green) Maximum Charging Circuit-Normal Flat Charge:27.6 VDC
• ALARM SILENCED(yellow) @ 1.4 A.Supervised, nonpower-limited.
CONTROL BUTTONS • Maximum Charger Capacity: 18 AH battery for MS-5UD-
• ACKNOWLEDGE 3(E),and 26 AH battery for MS-10UD-7(E). [Two 18 Ah bat-
teries can be housed in the FACP cabinet. Larger batteries
• ALARM SILENCE require separate battery box such as the BB-26 or BB-55.]
Top Dept 1.5.207"(13.23 cm)
- _ - - -
Door= 16.821"(42.73 cm)� Depth=
Backbox= 16.65"(42.29 cm) 5 257"�
(13.353 cm)
Door= 19.26"(48.92 cm)
Backbox= 19.0"(48.26 cm)
E
3
Left Side Right Side
000000000000000000......000000..................
000000000000000000000000000aae000a00000000000000
Bottom ;-
Cabinet Measurements
Page 2 of 4—DF-52416:D•07/26/2010
• Minimum Battery Size:7 AH. MS-10UD-7E: Same as above with 240 VAC FLPS-7.
Initiating Device Circuits —TB4 (and TB 6 on MS-10UD-7 IPDACT, IPDACT2/2UD Internet Monitoring Module:
only): Mounts in bottom of enclosure with optional mounting kit (PN
• Alarm Zones 1 -5 on TB 4(MS-5UD-3 and MS-10UD-7). IPBRKT). Connects to primary and secondary DACT tele-
• Alarm Zones 6- 10 on TB6(MS-10UD-7 only). phone output ports for internet communications over customer
provided ethernet internet connection. Requires compatible
• Supervised and power-limited circuitry. Teldat Visoralarm Central Station Receiver. Can use DHCP or
• Operation:All zones Style B(Class B). static IP. (See data sheet DF-60407 for more information.)
• Normal Operating Voltage: Nominal 20 VDC. IPBRKT: Mounting kit for IPDACT in common enclosure.
• Alarm Current: 15 mA minimum. IPSPLT: Y Adaptor option to allow connection of both panel
• Short Circuit Current:40 mA max. dialer outputs to one cable input to IPDACT(sold separately).
• Maximum Loop Resistance: 100 ohms. OPTIONAL MODULES
• End-of-Line Resistor: 4.7K ohm, 1/2 watt (P/N 71252 UL- CAC-5X:Optional(Class A)Converter Module.Converts Style
listed). B (Class B) Initiating Device Circuits to Style D (Class A); and
• Standby Current:2 mA. Style Y (Class B) Notification Appliance Circuits to Style Z
Refer to the Fire-Lite Device Compatibility Document for listed (Class A). Connects to J2 on the MS-5UD-3 and MS-10UD-
compatible devices. 7(E) main circuit board and to J7 on the MS-10UD-7(E).
Notification Appliance Circuits — T135 (and TB 7 on MS- NOTE: Two Class A Converter Modules are required for the ten-
10UD-7 only): zone panel.
• Four NACs 4XTMF: Transmitter module. Provides a supervised output for
• Operation: Style Y(Class B) local energy municipal box transmitter and alarm and trouble
reverse polarity. Includes a disable switch and disable trouble
• Special Application power LED.A module jumper option allows the reverse polarity circuit
• Supervised and power-limited circuitry to open with a system trouble condition if no alarm conditions
• Normal Operating Voltage: Nominal 24 VDC exists. Mounts to the main circuit board connectors J4 and J5.
• Maximum Signaling Current: 3.0 A for MS-5UD-3, 2.5 A COMPATIBLE ANNUNCIATORS
maximum per NAC; 7.0 A for MS-10UD-7(E), 3.0 A maxi-
mum per NAC. ANN-80: Remote LCD Annunciator. Mimics the information
displayed on the FACP's LCD. Red. (For white, order: ANN-
• End-of-Line Resistor:4.7K ohm, 1/2 watt(Part#71252) 80-W)
• Max.Wiring Voltage Drop: 2 VDC ANN-LED: LED Annunciator with three LEDs for each zone:
Refer to the Fire•Lite Device Compatibility Document for com- Alarm, Trouble, and Supervisory. Mounts in the DP-51050(B)
patible listed devices. dress panel. Red. (For white,order ANN-LED-W.)
Form C Relays—T138: ANN-BLED: LED Annunciator with three alarm (red) indica-
• Relay 1 (factory default programmed as Alarm Relay) tors for up to 30 input zones or addressable points. (Red. For
• Relay 2 (factory default programmed as fail-safe Trouble white, order ANN-LED-W.) (See DF-60241).
Relay) ANN-RLY: Relay module. Mounts inside the cabinet. Provides
• Relay 3(factory default programmed as Supervisory Relay) ten Form C relays.
Special Application Resettable Power—TB9: ANN-S/PG: Serial/parallel printer gateway. Provides a connec-
• Jumper selectable by JP31 for resettable or nonresettable tion for a serial or parallel printer.
power. ANN-1/0: Driver module. Provides connections to a user-sup-
• Operating voltage:24 VDC nominal. plied graphic annunciator.
• Maximum available current: 500 mA - appropriate for pow- ACCESSORIES
ering four-wire smoke detectors. DP-51050: Optional dress panel. Restricts access to the sys-
• Power-limited circuit. tem wiring while allowing access to the membrane switch
Refer to the Fire-Lite Device Compatibility Document for listed panel.
compatible devices. BB-26: Battery backbox, holds up to two 25 AH batteries and
Remote Sync Output-TB2: Remote power supply synchro- CHG-75.
nization output,only required for the MS-5UD-3.24 VDC nom- BB-55: Battery backbox, holds up to two 25 AH batteries.
inal special application power. Maximum current is 40 mA.
End-of-Line Resistor: 4.7K ohm. Supervised and power-lim- TR-CE: Optional trim-ring for semi-flush mounted cabinets.
ited circuit. PRN-617: UL listed printer.
Product Line Information
MS-5UD-3: Five-zone, 24-volt Fire Alarm Control Panel
(includes backbox, FLPS-3 power supply, technical manual,
and a frame & post operating instruction sheet). 120 VAC
operation.
MS-5UD-3E: Same as MS-5UD-3 except for 240 VAC opera-
tion.
MS-10UD-7: Ten-zone, 24-volt Fire Alarm Control Panel
(includes backbox, FLPS-7 power supply, technical manual,
and a frame&post operating instruction sheet).
DF-52416:D•07/26/2010—Page 3 of 4
SYSTEM SPECIFICATIONS
System Capacity Temperature and Humidity Ranges
• Annunciators ......................................................................8 This system meets NFPA requirements for operation at 0 —
49°C/32 — 120°F and at a relative humidity 93% 2% RH
Electrical Specifications (noncondensing) at 32°C 2°C (90°F 3°F). However, the
useful life of the system's standby batteries and the electronic
• MS-5UD-3 (FLPS-3 Power Supply): 120 VAC, 60 HZ, components may be adversely affected by extreme tempera-
1.0 A ture ranges and humidity. Therefore, it is recommended that
• MS-10UD-7 (FLPS-7 Power Supply): 120 VAC, 60 HZ, this system and its peripherals be installed in an environment
3.90 A with a normal room temperature of 15—27°C/60—80°F.
• MS-5UD-3E (FLPS-3 Power Supply): 240 VAC, 50 HZ,
0.54 A. Agency Listings and Approvals
• MS-10UD-7E (FLPS-7 Power Supply): 240 VAC, 50 HZ, The listings and approvals below apply to the basic MS-51JD-3
2.20 A. and MS-10UD-7 control panels. In some cases, certain mod-
• Wire size: minimum 14 AWG (2.0 mm2) with 600 V insula- ules or applications may not be listed by certain approval
tion,supervised, nonpower-limited agencies, or listing may be in process. Consult factory for lat-
est listing status.
Cabinet Specifications • UL Listed: File S624
Door: 19.26" (48.92 cm.) high x 16.82" (42.73 cm.) wide x • FM Approved
0.72" (1.82 cm.) deep. Backbox: 19.00" (48.26 cm.) high x • CSFM:7165-0075:0214
16.65" (42.29 cm.) wide x 5.25" (13.34 cm.) deep. Trim Ring . MEA: MEA:333-07-E
(TR-CE):22.00" (55.88 cm.)high x 19.65" (49.91 cm.)wide.
NOTE: For ULC-listed models,see DF-60440.
Shipping Specifications NFPA Standards
Dimensions:
The MS-5UD-3(E) and MS-10UD-7(E) complies with the fol-
-20.00" (50.80 cm.) high lowing NFPA 72 Fire Alarm Systems requirements:
—22.5" (57.15 cm.)wide —LOCAL (Automatic, Manual, Waterflow and Sprinkler
—8.5" (21.59 cm.)deep. Supervisory).
Weight:27 lb(12.20 kg) —AUXILIARY(Automatic, Manual and Waterflow) (requires
4XTMF).
—REMOTE STATION (Automatic, Manual and Waterflow)
(Where a DACT is not accepted, the alarm, trouble and
supervisory relays may be connected to UL 864 listed
transmitters. For reverse polarity signaling of alarm and
trouble,4XTMF is required.)
—PROPRIETARY(Automatic, Manual and Waterflow).
—CENTRAL STATION (Automatic, Manual and Waterflow,
and Sprinkler Supervised).
—OT, PSDN (Other Technologies, Packet-switched Data
Network)
FireLiteO Alarms and System Sensor® are registered trademarks of
Honeywell International Inc.
02010 by Honeywell International Inc.All rights reserved.Unauthorized use
of this document is strictly prohibited.
I�O 9001 This document is not intended to be used for installation purposes.
We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements.
ENGINEERING&MANUFACTURING All specifications are subject to change without notice.
QUALITY SYSTEMS Made in the U.S.A.
For more information,contact Fire-Lite Alarms.Phone:(800)627-3473,FAX:(877)699-4105.
www.firelite.com
Page 4 of 4—DF-524160•07/26/2010
DF-52416:D•A3-20
MS-5UD(E)/MS-10UD(E) Series (a FIM-LITeALarms
Five Zone Fire Alarm Control Panel
Ten Zone Fire Alarm Control Panel . dby-Hone el t
General APPROVED
The MS-51LID-3(E) is a five-zone FACP (Fire Alarm Control
Panel)and the MS-10UD-7(E)is a ten-zone FRCP.These con- DATE 7 DY
trol panels provide reliable fire signaling protection for small to
medium-sized commercial, industrial, and institutional build- NO CHANGES AUTHORIZED
ings. Both panels include built-in communicators for Central UNLES
Station Service and remote upload/download.
Each of these FACPs is compatible with System Sensor's
microprocessor-based i3 series detectors.These conventional —_
smoke detectors can transmit a maintenance trouble signal to �-
the FACP indicating the need for cleaning and a supervisory
"freeze" signal when the ambient temperature falls below the
detector rating. Additionally, both the MS-5UD-3 and MS-
10UD-7 are compatible with conventional input devices such
as two-and four-wire smoke detectors,pull stations,waterflow
devices, tamper switches, and other normally-open contact
devices. Refer to the Fire-Lite Device Compatibility Document
for a complete listing of compatible devices.
Outputs include four NACs (Notification Appliance Circuits),
three programmable Form-C relays (factory programmed for
Alarm.Trouble,and Supervisory)and 24 VDC special applica-
tion resettable and nonresettable power outputs. The FACPs
supervise all wiring, AC voltage, battery level and telephone —Strobe Synchronization for System Sensor, Wheelock,
line integrity. Gentex,Faraday,or Amseco devices.
Activation of a compatible smoke detector or any normally- —Selective Silence(horn-strobe mute).
open fire alarm initiating device will activate audible and visual
signaling devices, illuminate an indicating LED, sound the —Temporal or Steady Signal.
piezo sounder at the FACP, activate the communicator and —Silenceable or Nonsilenceable.
FACP alarm relay, and operate an optional module used to . Optional CAC-5X Style Z (Class A) Converter Module for
notify a remote station or initiate an auxiliary control function. NACs and IDCs(2 required for MS-10UD-7).
New options include a UL listed printer, PRN-6F and FireLite's • Form-C Relays for Alarm, Trouble and Supervisory- Con-
IPDACT Internet Monitoring module. The FireWatch Series tact Ratings 2.0 A@ 30 VDC or 0.5 A @ 30 VAC(resistive).
internet monitoring modules IPDACT-2 and IPDACT-2UD per- . 3.0 A total system current for MS-5UD-3.
mit monitoring of alarm signals over the Internet saving the • 7.0 A total system current for MS-10UD-7.
monthly cost of two telephone lines.Although not required,the
secondary telephone line may be retained providing backup . Optional Dress Panel DP-51050
communication over the public switched telephone line. • Optional Trim Ring TR-CE for semi-flush mounting.
NOTE. The MS-5UD-3E and MS-10UD-7E offers the same fea- • 24 volt operation.
tures as the MS-5UD-3 and MS-10UD-7 but allow connection to . Low AC voltage sense.
240 VAC. Unless otherwise specified, the information in this data Alarm Verification.
sheet applies to both the 120 VAC and the 240 VAC versions of
these panels. • PAS(Positive Alarm Sequence).
NOTE.For ULC-listed models,see DF-60440. • Automatic battery trickle charger.
• Up to eight ANN-BUS annunciators:
Features —Optional 8 zone Relay Module ANN-RLY.
• Listed to UL Standard 864,9th edition. —Optional LED Annunciator Module ANN-LED,
• Built-in DACT(Digital Alarm Communicator/Transmitter). —Optional Remote Annunciator ANN-80.
• Style B(Class B)IDC(Initiating Device Circuit) —Optional Remote Printer Gateway ANN-S/PG.
—MS-5UD-3-five IDCs. —Optional LED Annunciator Driver ANN-1/0.
—MS-10UD-7-ten IDCs. Optional 4XTMF module (conventional reverse polarity/city
• Style Y(Class B)NAC(Notification Appliance Circuit)-spe- box transmitter).
cial application power PROGRAMMING AND SOFTWARE.-
-MS-5UD-3-four NACs. • Can be programmed the 2anel with no special software
—MS-10UD-7-four NACs. or additional equipmen.
• Notification Appliances may be programmed as • Programmable Make/ eUa
—Silence Inhibit. • Upload/Download(loc I CUnVaEnD
—Auto-Silence. integral DACT.
DF-52416:D•07/26/2010— age 1 of 4
USER INTERFACE., • SYSTEM RESET(lamp test)
• Built-in DACT(Digital Alarm CommunicatorlTransmitter). • DRILL
• Integral 80-character LCD display with backlighting and
keypad. Terminal Blocks
• Real-time clock/calendar with automatic daylight savings AC Power—TB1:
adjustments. • MS-5UD-3 (FLPS-3 Power Supply): 120 VAC, 50/60 HZ,
• ANN-BUS for connection to remote annunciators. 1.00 A.
• Audible or silent walk test capabilities. • MS-5UD-3E (FLPS-3 Power Supply): 240 VAC, 50 HZ,
• Piezo sounder for alarm,trouble,and supervisory. 0.54 A.
• MS-10UD-7 (FLPS-7 Power Supply): 120 VAC, 50/60 HZ,
Controls and Indicators 3.80 A.
LED INDICATORS • MS-10UD-7E(FLPS-7 Power Supply):240 VAC, 50/60 HZ,
2.20 A.
• FIRE ALARM(red) Wire size:minimum 14 AWG(2.00 mm2)with 600 V insulation.
• SUPERVISORY(yellow) Supervised, nonpower-limited.
• TROUBLE(yellow) Battery(sealed lead acid only)—J12:
• AC POWER(green) • Maximum Charging Circuit-Normal Flat Charge:27.6 VDC
• ALARM SILENCED(yellow) @ 1.4 A.Supervised,nonpower-limited.
CONTROL BUTTONS • Maximum Charger Capacity: 18 AH battery for MS-5UD-
• ACKNOWLEDGE 3(E),and 26 AH battery for MS-10UD-7(E).(Two 18 Ah bat-
teries can be housed in the FACP cabinet. Larger batteries
• ALARM SILENCE require separate battery box such as the BB-26 or BB-55.1
Top � - - = - - _ -- - Depth=5.207"(13.23 cm)
1
_Door= 16.821"(42.73 cm) Depth0. =
Backbox= 16.65"(42.29 cm) I F5.257"—►
(13.353 cm)
I
Door=19.26"(48.92 cm)
Backbox= 19.0"(48.26 cm)
t' E
Left Side Right Side
Bottom
Cabinet Measurements
Page 2 of 4—DF-52416:D•07/26/2010
• Minimum Battery Size:7 AH. MS-10UD-7E:Same as above with 240 VAC FLPS-7.
Initiating Device Circuits—T134 (and TB 6 on MS-10UD-7 IPDACT, IPDACT 2/2UD Internet Monitoring Module:
only): Mounts in bottom of enclosure with optional mounting kit(PN
• Alarm Zones 1 -5 on TB 4(MS-5UD-3 and MS-10UD-7). IPBRKT). Connects to primary and secondary DACT tele-
• Alarm Zones 6-10 on TB6(MS-10UD-7 only). phone output ports for Internet communications over customer
provided ethernet internet connection. Requires compatible
• Supervised and power-limited circuitry. Teldat Visoralarm Central Station Receiver.Can use DHCP or
• Operation:All zones Style B(Class B). static IP. (See data sheet DF-60407 for more information.)
• Normal Operating Voltage:Nominal 20 VDC. IPBRKT:Mounting kit for IPDACT in common enclosure.
• Alarm Current: 15 mA minimum. IPSPLT: Y Adaptor option to allow connection of both panel
• Short Circuit Current:40 mA max. dialer outputs to one cable input to IPDACT(sold separately).
• Maximum Loop Resistance: 100 ohms. OPTIONAL MODULES
• End-of-Line Resistor: 4.7K ohm, 1/2 watt (P/N 71252 UL- CAC-5X:Optional(Class A)Converter Module.Converts Style
listed). B(Class B)Initiating Device Circuits to Style D(Class A);and
• Standby Current:2 mA. Style Y (Class B) Notification Appliance Circuits to Style Z
Refer to the Fire-Lite Device Compatibility Document for listed (Class A). Connects to J2 on the MS-5UD-3 and MS-10UD-
compatible devices. 7(E)main circuit board and to J7 on the MS-10UD-7(E).
Notification Appliance Circuits — TB5 (and TB 7 on MS- NOTE: Two Class A Converter Modules are required for the ten-
10UD-7 only): zone panel.
• Four NACs 4XTMF:Transmitter module. Provides a supervised output for
• Operation:Style Y(Class B) local energy municipal box transmitter and alarm and trouble
reverse polarity. Includes a disable switch and disable trouble
• Special Application power LED.A module jumper option allows the reverse polarity circuit
• Supervised and power-limited circuitry to open with a system trouble condition if no alarm conditions
• Normal Operating Voltage: Nominal 24 VDC exists.Mounts to the main circuit board connectors J4 and J5.
• Maximum Signaling Current: 3.0 A for MS-5UD-3, 2.5 A COMPATIBLE ANNUNCIATORS
maximum per NAC; 7.0 A for MS-10UD-7(E), 3.0 A maxi- ANN-80: Remote LCD Annunciator. Mimics the information
mum per NAC. displayed on the FACP's LCD. Red. (For white, order: ANN-
• End-of-Line Resistor:4.7K ohm, 1/2 watt(Part#71252) 80-W)
• Max.Wiring Voltage Drop:2 VDC ANN-LED: LED Annunciator with three LEDs for each zone:
Refer to the Fire-Lite Device Compatibility Document for com- Alarm, Trouble, and Supervisory. Mounts in the DP-51050(B)
patible listed devices. dress panel. Red. (For white,order ANN-LED-W.)
Form C Relays—T138: ANN-RLED: LED Annunciator with three alarm (red) indica-
• Relay 1(factory default programmed as Alarm Relay) tors for up to 30 input zones or addressable points.(Red. For
• Relay 2 (factory default programmed as fail-safe Trouble white,order ANN-LED-W.)(See DF-60241).
Relay) ANWRLY: Relay module. Mounts inside the cabinet. Provides
• Relay 3(factory default programmed as Supervisory Relay) ten Form C relays.
Special Application Resettable Power—TB9: ANN-S/PG:Serial/parallel printer gateway. Provides a connec-
• Jumper selectable by JP31 for resettable or nonresettable tion for a serial or parallel printer.
power. ANN-1/0: Driver module. Provides connections to a user-sup-
• Operating voltage:24 VDC nominal. plied graphic annunciator.
• Maximum available current: 500 mA-appropriate for pow- ACCESSORIES
ering four-wire smoke detectors. DP-51050: Optional dress panel. Restricts access to the sys-
• Power-limited circuit. tem wiring while allowing access to the membrane switch
Refer to the Fire-Lite Device Compatibility Document for listed panel.
compatible devices. BB-26: Battery backbox, holds up to two 25 AH batteries and
Remote Sync Output-T132: Remote power supply synchro- CHG-75.
nization output,only required for the MS-5UD-3.24 VDC nom- BB-55:Battery backbox,holds up to two 25 AH batteries.
inal special application power. Maximum current is 40 mA.
End-of-Line Resistor: 4.7K ohm. Supervised and power-lim- TR-CE:Optional trim ring for semi-flush mounted cabinets.
ited circuit. PRN-6F:UL listed printer.
Product Line Information
MS-51.113-3: Five-zone, 24-volt Fire Alarm Control Panel
(includes backbox, FLPS-3 power supply, technical manual,
and a frame & post operating instruction sheet). 120 VAC
operation.
MS-5UD-3E: Same as MS-5UD-3 except for 240 VAC opera-
tion.
MS-10UD-7: Ten-zone, 24-volt Fire Alarm Control Panel
(includes backbox, FLPS-7 power supply, technical manual,
and a frame&post operating instruction sheet).
DF-52416:D•07/26/2010—Page 3 of 4
SYSTEM SPECIFICATIONS
System Capacity Temperature and Humidity Ranges
• Annunciators....................................................... ........_.. 8 This system meets NFPA requirements for operation at 0 —
49°C/32 — 120"F and at a relative humidity 93% ± 2% RH
Electrical Specifications (noncondensing) at 32°C ± 2°C (90°F ± 30F). However, the
useful life of the system's standby batteries and the electronic
• MS-5UD-3 (FLPS-3 Power Supply): 120 VAC, 60 HZ, components may be adversely affected by extreme tempera-
1.0 A ture ranges and humidity. Therefore, it is recommended that
• MS-10UD-7 (FLPS-7 Power Supply): 120 VAC, 60 HZ, this system and its peripherals be installed in an environment
3.90 A with a normal room temperature of 15—27°C/60—80°F.
• MS-5UD-3E (FLPS-3 Power Supply): 240 VAC, 50 HZ,
0.54 A. Agency Listings and Approvals
• MS-10UD-7E (FLPS-7 Power Supply): 240 VAC, 50 HZ, The listings and approvals below apply to the basic MS-5UD-3
2.20 A. and MS-t0UD-7 control panels. In some cases, certain mod-
• Wire size: minimum 14 AWG (2.0 mm2) with 600 V insula- ules or applications may not be listed by certain approval
tion,supervised,nonpower-limited agencies, or listing may be in process Consult factory for lat-
est listing status.
Cabinet Specifications • UL Listed: File S624
Door: 19.26" (48.92 cm.) high x 16.82" (42.73 cm.) wide x • FM Approved
0.72" (1.82 cm.) deep. Backbox: 19.00" (48.26 cm.) high x • CSFM:7165-0075:0214
16.65" (42.29 cm.)wide x 5.25" (13.34 cm.) deep.Trim Ring . MEA: MEA:333-07-E
(TR-CE):22.00"(55.88 cm.)high x 19.65"(49.91 cm.)wide.
NOTE:For ULC-listed models,see DF-60440.
Shipping Specifications NFPA Standards
Dimensions: The MS-5UD-3(E) and MS-10UD-7(E) complies with the fol-
-20.00"(50.80 cm.)high lowing NFPA 72 Fire Alarm Systems requirements:
—22.5"(57.15 cm.)wide —LOCAL (Automatic, Manual, Waterflow and Sprinkler
—8.5"(21.59 cm.)deep. Supervisory).
Weight:27 lb(12.20 kg) —AUXILIARY(Automatic, Manual and Waterflow) (requires
4XTMF).
—REMOTE STATION (Automatic, Manual and Waterflow)
(Where a DACT is not accepted, the alarm, trouble and
supervisory relays may be connected to UL 864 listed
transmitters. For reverse polarity signaling of alarm and
trouble,4XTMF is required.)
—PROPRIETARY(Automatic,Manual and Waterflow).
—CENTRAL STATION (Automatic, Manual and Waterflow,
and Sprinkler Supervised).
—OT, PSDN (Other Technologies, Packet-switched Data
Network)
FireLite® Alarms and System Sensor® are registered trademarks of
Honeywell International Inc.
02010 by Honeywell International Inc.All rights reserved.Unauthorized use
of this document is strictly prohibited
'SO 9001 This document is not intended to be used for installation purposes.
We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements.
ENSPI9tINti ti MN KTIRING All specifications are subject to change without notice.
auatlir srsrEMs Made in the U.S.A.
For more information,contact Fire-Lite Alarms.Phone:(800)627-3473,FAX:(877)699-4105.
www.firelite.com
Page 4 of 4—DF-52416:D•07/26/2010
Tl
Fire and Security, LLC. PO BOX 3711
ARLINGTON,WA 98223
I III is LIC.#BHFIRHF842KW
PH:425-244-1445
2/6/2024
Arlington Advanced Manufacturing Park LLC
17931 59th Ave Ne
Arlington, WA 98223
Scope Of Work:
B&H Fire and Security proposes to replace the old Fire Alarm Control Panel with a new like and kind Fire
Alarm Control Panel. No modifications to building audible visual or any initiating devices at this time.
Construction Manager
Jeff Brossard
425.244.1445
RECEIVE,.-D
FEB 0 6 2024
Permit#: 5805
Permit Date: 02/06/24
Permit Type: FIRE ALARM
Project Name: Building 2 FA Permit
Applicant Name: B+H Fire and Security
Applicant Address: PO Box 3711
Applicant, City, State, Zip: Arlington,Wa, 98223
Contact: Hailey Brossard
Phone: 3603227635
Email:jeff@bnhfire.com
Scope of Work: Fire Alarm Panel Replacement like and kind
Valuation: 1500.00
Square Feet: 39320
Number of Stories: 1
Construction Type: 11113
Occupancy Group: F-1; Factory Mod. Hazard
ID Code: CIC
Permit Issued: 03/01/2024
Permit Expires: 08/30/2024
Form Permit Type: FIRE ALARM
Status: COMPLETE
Assigned To: Hannah Hardwick
Property
Parcel# Address Legal Description Owner Name Owner Phone Zoning
31052200403100 17931 59TH AVE NE Arlington Advanced 300 INDUSTRIAL/
Manufacturing Park MANUFACTURING
Contractors
Contractor Primary Contact Phone Address Contractor Type License License#
B&H FIRE AND JEFF BROSSARD 425-244-1445 PO BOX 3711 ELECTRICAL COA 603 612 112
SECURITY LLC CONTRACTOR
B&H FIRE AND JEFF BROSSARD 425-244-1445 PO BOX 3711 ELECTRICAL LABOR&BHFIRHF842KW
SECURITY LLC CONTRACTOR INDUSTRIES
Inspections
Date Inspection Type Description Scheduled Date Completed Date Inspector Status
03/05/2024 FA00.FIRE ALARM AM Requested 03/08/2024 03/08/2024 BUILDING Approved
FINAL
Plan Reviews
Date Review Type Description Assigned To Review Status
02/07/2024 FIRE ALARM BUILDING Approved
Fees
Fee Description Notes Amount
Fire System Plan Review Table 4-2 $100.00
Credit Card Service $3.00
Processing/Technology $25.00
Fire Alarm System Permit NFPA 72- 105.7.3 $75.00
FACP/Transmitter-Replace $125.00
Credit Card Service $6.75
Total $334.75
Attached Letters
Date Letter Description
02/29/2024 Building Permit
Payments
Date Paid By Description Payment Type Accepted By Amount
02/07/2024 XBP Conf: $100.00
165030420
02/07/2024 Jeff Brossard 165030420 $3.00
03/01/2024 XBP Con£ $225.00
166966580
03/01/2024 Jeff Brossard 166966580 $6.75
Outstanding Balance $0.00
Notes
Date Note Created By:
03/01/2024 sent permit for signature via iworqs Hannah Hardwick
02/07/2024 emailed for plan review fee.Once paid,will be routed for review. Hannah Hardwick
Uploaded Files
Date File Name
03/01/2024 18788345-20240229 BLD5805 Approved Plans.pdf
03/01/2024 18788344-2024 BLD5805 IssuedPermit.pdf
02/07/2024 18473781-20240206 BLD5805 App.pdf
02/07/2024 18473782-20240206 BLD5805 Scope of Work.pdf