Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
19713 51st Dr Ne_BLD2617_2026
NOTICE TO PERMITEE AND/OR OWNER ❑ PARTIAL APPROVAL ❑ CORRECTIONS REQUIRED ❑ DO NOT OCCUPY 7APPROVED PERMIT#: - 1 M� DATE: 2i.2-C7G JOB ADDRESS: (SI LOT ti: PROJECT: r/']A TYPE OF INSPECTION: OTHER: ❑ NO PERMIT-STOP WORK-OBTAIN PERMIT ❑ CONSTRUCTION IS NOT IN ACCORDANCE WITH APPROVED PLANS AND PERMIT -STOP WORK ❑ STOP WORK UNTIL AUTHORIZED TO CONTINUE BY INSPECTOR. ❑ CORRECTIONS LISTED BELOW MUST BE MADE BEFORE WORK CAN BE APPROVED. ❑ WORK NOT READY FOR INSPECTION:$50 REINSPECTION FEE (PER IBC) MUST BE PAID PRIOR TO NEXT INSPECTION. Cl CONTACT INSPECTOR 360-403-3551 Cl CALL FOR REINSPECTION f1 - i THE ACTIONS OR CORRECTIONS INDICATED ABOVE ARE REQUIRED WITHIN DAYS OR PENALTIES IMPOSED BY LAW MAYAPPLY. FOR INSPECTION CALL: 360-403-3417 C' %• INSPECTOR DATV ,SY �it Cl PLANNING O CIVIL q`BUILDING CITY OF ARLINGTON I f NOTICE TO PERMITEE AND/OR OWNER ❑ PARTIAL APPROVAL ❑ CORRECTIONS REQUIRED ❑ DO NOT OCCUPY XAPPROVED PERMIT#: Z61LIA M DATE: Y 1-7- JOB ADDRESS: /q 7/3 5/ S-Tor2- N l LOT#: PROJECT: - 4�7_ TYPE OF INSPECTION: % r:2 1 OTHER: ❑ NO PERMIT-STOP WORK-OBTAIN PERMIT ❑ CONSTRUCTION IS NOT IN ACCORDANCE WITH APPROVED PLANS AND PERMIT -STOP WORK Cl STOP WORK UNTIL AUTHORIZED TO CONTINUE BY INSPECTOR. ❑ CORRECTIONS LISTED BELOW MUST BE MADE BEFORE WORK CAN BE APPROVED. ❑ WORK NOT READY FOR INSPECTION:$50 REINSPECTION FEE(PER IBC) MUST BE PAID PRIOR TO NEXT INSPECTION. ❑ CONTACT INSPECTOR 360-403-3551 ❑ CALL FOR REINSPECTION THE ACTIONS OR CORRECTIONS INDICATED ABOVE ARE REQUIRED WITHIN DAYS OR PENALTIES IMPOSED BYLAW MAYAPPLY. FOR INSPECTION CALL: 360-403-3417 Aor INSPECTOR DATE M PLANNING Cl CIVIL 77 BUILDING '9 t CITY OF ARLINGTON � „�; S I I� CITY OF ARLINGTON 238 N. OLYMPIC AVE -ARLINGTON, WA. 98223 4P PHONE; (360) 403-3551 BUILDING PERMIT Address:19713-1/2 51st Dr NE Permit#:2617 Parcel#:00426400005000 Valuation:0.00 OWNER APPLICANT CONTRACTOR Name:MATTHEWS CELINDA Name:Celinda Matthews Name:Dudley's Heating and Air Conditioning Address:PO BOX 219 Address:19713 51st Dr NE Address: 16921 Smokey Point Blvd City,State Zip:SILVANA,WA 98287 City,State Zip:Arlington,WA 98223 City,State Zip:Arlington,WA 98223 Phone: Phone:425-890-8779 Phone:425-322-8077 LIC: EXP: MECHANICAL CONTRACTOR PLUMBING CONTRACTOR Name:Dudley's Heating and Air Conditioning Name: Address: 16821 Smokey Point Blvd Address: City,State,Zip:Arlington,WA 98223 City,State,Zip: Phone:425-322-8077 Phone: LIC#:DUDLE**932N7 EXP: 09/28/2019 LIC#: EXP: JOB DESCRIPTION PERMIT TYPE: Residential Mechanical CODE YEAR: 2015 STORIES: CONST.TYPE: DWELLING UNITS: OCC GROUP: BUILDINGS: OCC LOAD: PERMIT APPROVAL I AGREE TO COMPLY WITH CITY AND STATE LAWS REGULATING CONSTRUCTION AND IN DOING THE WORK AUTHORIZED THEREBY, NO PERSON WILL BE EMPLOYED IN VIOLATION OF THE LABOR CODE OF THE STATE OF WASHINGTON RELATING TO WORKMEN'S COMPENSATION INSURANCE AND RCW 18.27. THIS APPLICATION IS NOT A PERMIT UNTIL SIGNED BY THE BUILDING OFFICIAL OR HIS/HER DEPUTY AND ALL FEES ARE PAID. IT IS UNLAWFUL TO USE OR OCCUPY A BUILDING OR STRUCTURE UNTIL A FINAL INSPECTION HAS BEEN MADE AND APPROVAL OR A CERTIFICATE OF OCCUPANCY HAS BEEN GRANTED. IBC110/IRCI10. SALES TAX Nelating to construction and construction materials in the City of Arlington m si be reported oq your sales ta�T( rn rm and codeln��_ j - ` - I I Signature Print Name Date Relea ed By Date CONDITIONS Pipe shall be pressurized at 15-201bs (psi) for minimum 2 hours. Adhere to proved appliances. Call for inspection. THIS PERMIT AUTHORIZS ONLY THE WORK NOTED.THIS PERMIT COVERS WORK TO BE DONE ON PRIVATE PROPERTY ONLY. ANY CONSTRUCTION ON THE PUBLIC DOMAIN(CURBS,SIDEWALKS,DRIVEWAYS,MARQUEES,ETC.)WILL REQUIRE SEPARATE PERMISSION. PERMIT FEES Date Description Fee Amount 6/17/2019 Gas Outlets Base Fee 1 to 5 $10.00 6/17/2019 Mechanical Fee(Enter Fixture Fee) $25.00 6/17/2019 Mechanical Permit Base Fee $25.00 Total Due: $60.00 Total Payment: $0.00 Balance Due: $60.00 CALL FOR INSPECTIONS BUILDING(360)403-3417 When calling for an inspection please leave the following information: Permit Number,Type of Inspection being requested,and whether you prefer morning or afternoon l' 1 I ■ ■ i I II I Permit Information Date 6/17/2019 Permit Number 2617 Project Name Matthews Heat Pump Applicant Name Celinda Matthews Applicant Address 19713 51 st Dr NE City,State,Zip Arlington,WA 98223 Contact Celinda Matthews Phone 425-890-8779 Email wapikwan60@gmaii.com Permit Type Residential Mechanical Site Address 19713 51st Dr NE Valuation 0.00 Status Applied Permit Issued Permit Expires Square Feet 0 Type of Construction/Occupancy Load Residential Mechanical Number of Stories 0 Proposed Use Install TWH and Gas range w/gas line install MIC/Opportunity Zone Assigned To Raelynn Jones Property Parcel Address Legal Owner Owner Phone Zoning 00426400005000 19713 51ST DR NE MATTHEWS CELINDA 1 1122 Two Family Residence(Duplex) Contractors Contractor Name Primary Contact Phone Email Contractor Type License License# Oudle 's Heating and Air Conditioning )avid Dudley 125-322-8077 ,'ONTRACTOR I IDUDLE**932N7 Fees Fee Description Notes Amount Gas Outlets Base Fee 1 to 5 322.10.00.00 $10.00 Mechanical Fee Enter Fixture Fee 322.10.00.00 2 $25 ea. $50.00 Mechanical Permit Base Fee 322.10.00.00 $25.00 Processin !Technology Fee 341.43.00.02 $25.00 Total $110.00 Uploaded Files Upload File Date File Uploaded B 6/17/2019 4:40:53 PM IZ617 Application and site plan.pdf liones, Raelynn ,� :, :� ,: k I' ,�, �. RESIDENTIAL MECHANICAL PERMIT APPLICATION Department of Community& Economic Development City of Arlington • 18204 59th Ave NE• Arlington,WA 98223 • Phone(360) 403-3551 THIS APPLICATION IS TO BE USED WHEN APPLYING FOR NEW MECHANICAL INSTALLATION AND OR GAS PIPING FOR EXISTING RESIDENCES, PLEASE FILL OUT ALL PAGES OF THIS APPLICATION AND INCLUDE ALL INFORMATION, Project Address: A4 Project Description: Owner: Address: /��/J— Sj - ,�E City: Stater Zip Code: Phone: Tom. P?4V-'r0 Email: Applicant: Address: .� x�CJ City: State: Zip Code: Phone: _ de- C. Email: V� CONTRACTOR INFORMATION Contractor Name: - -yj1T_A_E y 'S - F- nAQ-4_ Address: - �ro�'�/ �lo---. /-ftate:-� � ity: Zip Code: License Number: 2)0�A--rE, fSol W;7 Expiration:���!� Phone: ' vZ1�. ���. �� -- Email:_ STAFF USE ON Y Received UN 18 2019 Permit #: Accepted by:_ Da e: 6/16LP Page 1 of 2 � ' ti ' - r +� ■ I r RESIDENTIAL MECHANICAL PERMIT APPLICATION Department of Community& Economic Development City of Arlington • 18204 59th Ave NE• Arlington, WA 98223 • Phone(360) 403-3551 SELECT ALL PROPOSED APPLIANCES ❑ Furnace (80+) Model # AFUE ❑ Heat Pump Model # AFUE HSPE_ AC Unit Model # SEER Freestanding Stove ❑ Fire Place Insert ❑ Outdoor BBQ Pr Gas Piping ❑ Solid-Fuel Appliance Other Aw_�� Gas Piping Information Not Applicable: ❑ Pipe Material: 31,aCk 2oU Pipe Size: Distance from Meter to Furthest Appliance: Total BTU's of all Appliances: /�DDl�O /'j/0000 New gas piping requires a pressure test hooking to any appliance • Sediment traps (drips) are required on all gas lines • Gas lines are required to be supported/secured every 6 to 8 feet Proper Combustion air and venting required for all appliances • A shut-off valve is r fired ithin 6 feet of all appliances Applicant Signature: Date: Applicant Printed Name: I hereby certify that the above information is correct and that the construction, installation for the above mentioned property will be in accordance with the applicable laws of the City of Arlington and the State of Washington. 6/16LP Page 2 of 2 I I 1 I _ if Tankless Rinnai R53 Residential Dimensions 9"D x 14"Wx24" H8"Dx14" Wx22" H Weight 49 Ibs 34 Ibs Maximum/Minimum Gas Rate (Input BTU's) 180,000/15,000 Hot Water Capacity Range 0.6 to 5.3 GPM 0.6 to 5.3 GPM Maximum Hot Water Capacity(35°F Rise) 5.3 GPM 5.3 GPM Maximum Hot Water Capacity(50'F Rise)5.3 GPM 4.8 GPM Temperature Range With Remote Key Pads Connected MC-100V-1, MC-91-1, BC-100V and MC-502RC: 98°-140"F Received JUN 1 .3 20i9 , 7 -La l� ,� 4' 1 Gas Range Model • Brand:Samsung • SKU:NX58H9500WS • UPC:887276032047 • Stockld:361172 • Product Number:NX58H9500WS • Front Left Output:15000 • Back Left Output:9500 • Back Right Output:5000 o Front Right Output:18000 Electrical Specifications • Volts:120 Volts • Amps_20 Amps Technical Details • BTUs:18000 • Ignition Type:Electronic • LP Conversion:Yes Broiler Element Location:Top Oven BTUs:18000 Frequency:60 Hz. Middle Oval Burner:9500 Weight:224.87 lbs r M f r�l ,i - �- -- -- I_- ..._... �. � , ,i . ---��---- ��� \,- � r i , f� � � ��� ,�' -�.� � � . _� �� f. ! E i'. _ _ � � � ��I �' J � T rHw � � -�I �arrh L&ISEARCH ChL• •• • Safety&Health O Claims&Insurance c Workplace Rights O Trades&Licensing Washington State Department of Labor & Industries DUDLEY'S Owner or.tradesperson 16821 SMOKEY PT BLVD#812 ................................ Principals ARLINGTON,WA 98223 DUDLEY,DAVID DUANE,OWNER 425-322-8077 Doing business as SNOHOMISH County DUDLEY'S WA UBI No. Business type 602 061 158 Individual Certifications & Endorsements OMWBE Certifications Apprentice Training Agent License Verify the contractor's active registration/license/certification(depending on trade)and any past violations. Construction Contractor Active. Meets current requirements. License specialties HeatinglVent/Air-Conditioning and Refrig (HVAC/R) License no. DUDLE-932N7 Effective—expiration 08/27/2007—09/28/2019 Bond WESTERN SURETY CO $6,000.00 Bond account no. 70345426 Received by L&I Effective date 08/27/2007 08/10/2007 Expiration date Until Canceled Insurance Ohio Cas Ins Co $1,000,000.00 Policy no. BLOS3687425 Received by L&I Effective date 09/12/2018 10/12/2017 Expiration date 1 0/1 212 01 9 Insurance history Help us improve Savings No savings accounts during the previous 6 year period. ' r � r Lawsuits against the bond or savings No lawsuits against the bond or savings acca 'during the previous 6 year period. L&1 Tax debts No L&I tax debts are recorded for this contractor license during the previous 6 year period,but some debts may be recorded by other agencies. License Violations Infraction no. EJONM01199 Satisfied Issue date RCW/WAC 05/15/2014 19.28.041 RCW Violation city Violation amount Arlington $500.00 Type of violation ELECTRICAL CITATION Description Offering to perform,submitting a bid for, advertising,installing or maintaining cables, conductors or equipment that convey or utilize electrical current without having a valid electrical contractor license. Workers' comp Do you know if the business has employees?If so,verify the business is up-to-date on workers'comp premiums. This company has multiple workers'comp accounts. Active accounts L&I Account ID Account is current. 997,725-01 Doing business as DUDLEY'S Estimated workers reported Quarter 1 of Year 2019"1 to 3 Workers" L&I account contact T4/SYDNEY RAVES(360)902-4659-Email:RAVS235@lni.wa.gov Track this contractor 0 Public Works Requirements Verify the contractor is eligible to perform work on public works projects. Required Training—Effective July 17 2019 Contractor Strikes No strikes have been issued against this contractor. Contractors not allowed to bid No debarments have been issued against this contractor. Workplace safety and health No inspections during the previous 6 year period. improveHelp us NX58H950OWS 5.8 cu.ft. Slide-in Gas Range Features , . -J=L • Slide-in Design • 5 Gas Burners V -Right Front:Dual 18K BTU rr Left Front:15K BTU Right Rear:5K BTU JL Left Rear:9.5K BTU Power/Flexible Cooktop Center:9.5K BTU(Oval) • Large Oven Capacity—5.8 cu.ft. • Guiding Light Controls • Cast Iron 3 Piece Grates • Reversible Cast Iron Griddle Guiding Light Controls • Wok Grate • True Convection Oven(3-Fan) • Temperature Probe — • Warming Drawer(3 Levels) - • Grate Indicator Marks • Healthy Cook Options Convenience Large Capacity • Auto Oven Light • Sabbath Mode • Delay Start Available Colors • Auto Shut-Off Option • Child Safety Lock Stainless Steel(shown) ■ Black Stainless • Self Clean • 3 Favorite Cook Presets • 6 Healthy Cook Options Signature Features • 3 Chrome Oven Racks, including 1 Split Rack POWERFUL/FLEXIBLE COOKTOP •True dual-power burner allows for even heat distribution and reduced cooking time, plus the convenience of a large oval burner. GUIDING-LIGHT CONTROLS •Intuitive controls offer simple,step-by-step instructions for choosing cooking options. •Only illuminates cooking options that are able to be selected and goes from left to right eliminating back and forth. •Control temperature and time settings,select cooking functions and program your favorite recipes. TRUE CONVECTION •Heated fan system is great for baking and broiling because temperature is distributed thoroughly and food cooks evenly. REVERSIBLE CAST IRON GRIDDLE •Reversible griddle provides the flexibility of cooking on flat or grilled surface, while the Cast Iron provides even cooking. GRATE INDICATOR MARKS •Indicator marks located on the grates allow cookware to be ideally placed for precise cooking. SAMSUNG NX58H950OWS 5.8 cu.ft.Slide-in Gas Range INSTALLING YOUR RANGE U U Total Power(BTU) 57,000 BTU 30"minimum clearance between the top of the cooking surface and 31" 10 Power Source the bottom of an unprotected wood 30 120 V/60 Hz or metal cabinet;or 24"minimum when the bottom of the wood or metal Black Enamel 5 Burner Cooktop ••1s Right Front:18000 BTU—Dual cabinet is protected by not less than •Ri 9 1/4"flame retardant millboard covered ,� •Left Front:15000 BTU with not less than no.28 MSG sheet •Right Rear:5000 BTU steel,0.015"stainless steel,0.024" 0 0 0 0 0 aluminum or 0.020"copper. •Left Rear:9500 BTU •Center Rear:9500 BTU—Oval **18"minimum between the countertop Oven and the adjacent cabinet bottom. •Bake:150°F 550°F •Convection Bake:150°F-550°F •Bake Burner:18000 BTU •Broil Burner:16000 BTU •Variable Broil:Low/Hi(375°F-480°F) IMPORTANT:To eliminate the risk of burns or fire caused by reaching overheated surface units,cabinet storage •Convection Roast:1507-550°F space located above the surface units should be avoided.If cabinet storage is to be provided,the risk can be reduced •Sabbath Mode by installing a range hood that projects horizontally a minimum of 5"beyond the bottom of the cabinets. Warming Drawer •Capacity:0.7 cu.ft. •Heating Performance:600 W •Temperature Settings:3 Level Warranty Dimensions One(1)Year All Parts and Labor 3111 Five(5)Years Gas Cooktop 29"&" Product Dimensions&Weight(WxHxD) Actual Oven Dimensions: 25"x 211/8"x 19" Outside Dimensions: 2913/16"X 363/16-373/16"(Adjustable)x 263/8" Glass cooktop overlaps and sits on top of your Weight:202 lbs. kitchen countertop to give a built-in look. Shipping Dimensions&Weight(WxHxD) Cut out space for the range is 291/16. Dimensions: 331/16"x 41 3/41,x 305/16" Weight:225 lbs. 2.4" Color Model# UPC Code Stainless Steel NX58H9500WS 887276032047 Black Stainless Steel NX58K9500WG 887276142890 Adjustable Height 36'/16-37'/6' 26 3/81, S11 w w Actual color may vary.Design,specifications,and color availability are subject to change without notice. \V ■Y= Non-metric weights and measurements are approximate. ©2016 Samsung Electronics America,Inc.85 Challenger Road,Ridgefield Park,NJ 07660.Tel:800-SAMSUNG.samsung.com. Samsung is a registered trademark of Samsung Electronics Co.Ltd. J 1p NOTICE ,,o/� TO PERMITEE AND/OR OWNER ❑ PARTIAL APPROVAL ❑ CORRECTIONS REQUIRED ❑ DO NOT OCCUPY ❑ APPROVED PERMIT#: LOT#: DATE: JOB ADDRESS: ICI 1 TYPE OF INSPECTION: ❑ NO PERMIT-STOP WORK-OBTAIN PERMIT:AND MAKE WORK COMPLY WITH CURRENT BUILDING AND/OR PLANNING CODES. ❑ CONSTRUCTION IS NOT IN ACCORDANCE WITH APPROVED PLANS AND PERMIT -STOP WORK: MAKE EXISTING WORK COMPLY WITH APPROVED PLAN AND PERMIT OR REMOVE IT. ❑ STOP WORK UNTIL AUTHORIZED TO CONTINUE BY INSPECTOR. ❑ CORRECTIONS LISTED BELOW MUST BE MADE BEFORE WORK CAN BE APPROVED. ❑ WORK NOT READY FOR INSPECTION:$50 REINSPECTION FEE(PER IBC) MUST BE PAID PRIOR TO NEXT INSPECTION. ❑ CONTACT INSPECTOR 360-403-3551 ❑ CALL FOR REINSPECTION -rig _ V THE ACTIONS OR CORRECTIONS INDICATED ABOVEARE REQUIRED WITHIN DAYS OR PENALTIES IMPOSED BY LAW MAYAPPLY. FOR INSPECTION CALL: 360-403-3417 //y/,q I INSPECTOR DATE BUILDING DEPT. o PLANNING DEPT. CITY OF ARLINGTON iI 1 V - `'� ' RESIDENTIAL MEC HANICAL PERMIT APPLICATION Department of Community & Economic Development City of Arlington • 18204 59th Ave NE• Arlington, WA 98223 • Phone(360) 403-3551 THIS APPLICATION IS TO BE USED WHEN APPLYING FOR NEW MECHANICAL INSTALLATION AND OR GAS PIPING FOR EXISTING RESIDENCES. PLEASE FILL OUT ALL PAGES OF THIS APPLICATION AND INCLUDE ALL INFORMATION. Project Address: Project Description_ Owner: Address: City: State:&& Zip Code: Phone: 'J��.S. ��d• � Email: Applicant: 4-z _ . -At A- __ -- Address: �xitJ _ City: - - State: Zip Code: Phone: Email: _,Vg /e. wzo zX&P�- CONTRACTOR INFORMATION Contractor Name: 9/ Address: '�,��a �lv�a/__ SlNo . �� �iiY - - -- y ate,: O�f Zip Code: $PJf ffS License Number: -2)0'2> A-F. A Expiration: Phone: W95. 3d2,?. AP ; Email: - fox �9A�R' STAFF USE ON Y Received Permit #: k�D '7- �_ Accepted by:_ e Daf N 18 Z019 6/16LP Page 1 of 2 RESIDENTIAL MECHANICAL PERMIT APPLICATION Department of Community& Economic Development City of Arlington • 18204 59th Ave NE• Arlington, WA 98223 • Phone(360) 403-3551 SELECT ALL PROPOSED APPLIANCES ❑ Furnace (80+) Model # AFUE Heat Pump Model # AFUE HSPE f❑ AC Unit Model # SEER Eir Freestanding Stove I❑ Fire Place Insert ❑ Outdoor BBQ Zr Gas Piping ❑_ Solid-Fuel Appliance I?r Other Gas Piping Information Not Applicable: ❑ Pipe Material: 31,aCk 900 Pipe Size: Distance from Meter to Furthest Appliance: Total BTU's of all Appliances:—_� �dQ /�O�OD New gas piping requires a pressure test hooking to any appliance Sediment traps (drips) are required on all gas lines Gas lines are required to be supported/secured every 6 to 8 feet Proper Combustion air and venting required for all appliances A shut-off valve is r fired ithin 6 feet of all appliances Applicant Signature: __ — Date: Applicant Printed Name: I hereby certify that the above information is correct and that the construction, installation for the above mentioned property will be in accordance with the applicable laws of the City of Arlington and the State of Washington. 6/16LP Page 2 of 2 Tankless Rinnai R53 Residential Dimensions 9" D x 14" W x 24" H 8" D x 14" W x 22" H Weight 49 Ibs 34 Ibs Maximum/Minimum Gas Rate (Input BTU's) 180,000/15,000 Hot Water Capacity Range 0.6 to 5.3 GPM 0.6 to 5.3 GPM Maximum Hot Water Capacity (35'F Rise) 5.3 GPM 5.3 GPM Maximum Hot Water Capacity(50°F Rise) 5.3 GPM 4.8 GPM Temperature Range With Remote Key Pads Connected MC-100V-1, MC-91-1, BC-100V and MC-502RC: 980-140° F Received JUN 13 201f ;�L,b 2(,Q tl Gas Range Model Brand:Samsung SKU:NX58H9500WS • UPC:887276032047 • Stock Id:361172 • Product Number:NX58H9500WS • Front Left Output:15000 Back Left Output:9500 • Back Right Output:5000 • Front Right Output:18000 Electrical Specifications • Volts:120 Volts • Amps_20_Amps Technical Details • BTUs:18000 • Ignition Type:Electronic • LP Conversion:Yes • Broiler Element Location:Top • Oven BTUs:18000 • Frequency:60 Hz. • Middle Oval Burner:9500 • Weight:224.87lbs �� , , � � -� . . - � � � . � C�, ��< �� �� - �� . . ,, -% /� � ;,. j �. i i - . ; r% .... i ' 4 r' .j ��rHw - �� L I. ..---- - -- i P-- NOTICE � TO PERMITEE AND/OR OWNER ❑ PARTIAL APPROVAL ❑ CORRECTIONS REQUIRED ❑ DO NOT OCCUPY XAPPROVED PERMIT#: AM M DATE: �! ?`� JOB ADDRESS: /9 7/3 - ',/z 51 -s 12-- N c LOT#: PROJECT: 6r 12 TYPE OF INSPECTION: {OTHER: ❑ NO PERMIT-STOP WORK-OBTAIN PERMIT ❑ CONSTRUCTION IS NOT IN ACCORDANCE WITH APPROVED PLANS AND PERMIT -STOP WORK ❑ STOP WORK UNTIL AUTHORIZED TO CONTINUE BY INSPECTOR. ❑ CORRECTIONS LISTED BELOW MUST BE MADE BEFORE WORK CAN BE APPROVED. ❑ WORK NOT READY FOR INSPECTION: $50 REINSPECTION FEE (PER IBC) MUST BE PAID PRIOR TO NEXT INSPECTION. ❑ CONTACT INSPECTOR 360-403-3551 Cl CALL FOR REINSPECTION THE ACTIONS OR CORRECTIONS INDICATED ABOVE ARE REQUIRED WITHIN DAYS OR PENALTIES IMPOSED BY LAW MAYAPPLY. FOR INSPECTION CALL: 360-403-3417 INSPECTOR DATE ' 0 PLANNING D CIVIL BUILDING CITY OF ARLINGTON NOTICE TO PERMITEE AND/OR OWNER ❑ PARTIAL APPROVAL ❑ CORRECTIONS REQUIRED O DO NOT OCCUPY OAPPROVED PERMIT# r_,_2" l ! (AM/P.M DATE:ell.�i.47-020 JOB ADDRESS: ; �``- LOT#: PROJECT: MA-TiV i t TYPE OF INSPECTION: ��- OTHER: Cl NO PERMIT-STOP WORK-OBTAIN PERMIT ❑ CONSTRUCTION IS NOT IN ACCORDANCE WITH APPROVED PLANS AND PERMIT -STOP WORK ❑ STOP WORK UNTIL AUTHORIZED TO CONTINUE BY INSPECTOR. ❑ CORRECTIONS LISTED BELOW MUST BE MADE BEFORE WORK CAN BE APPROVED. ❑ WORK NOT READY FOR INSPECTION: $50 REINSPECTION FEE(PER IBC) MUST BE PAID PRIOR TO NEXT INSPECTION. Cl CONTACT INSPECTOR 360-403-3551 ❑ CALL FOR REINSPECTION ���r1ou�VJ THE ACTIONS OR CORRECTIONS INDICATED ABOVE ARE REQUIRED WITHIN DAYS OR PENALTIES IMPOSED BY LAW MAYAPPLY. FOR INSPECTION CALL: 360-403-3417 iA 2C INSPECTOR DAT Gt� DA 0 PLANNING 0 CIVIL BUILDING CITY OF ARLINGTON CITY OF ARLINGTON 238 N. OLYMPIC AVE -ARLINGTON, WA. 98223 PHONE; (360) 403-3551 BUILDING PERMIT Address:19713-1/2 51st Dr NE Permit#:2617 Parcel#:00426400005000 Valuation:0.00 OWNER APPLICANT CONTRACTOR Name:MATTHEWS CELINDA Name:Celinda Matthews Name:Dudley's Heating and Air Conditioning Address:PO BOX 219 Address:19713 51 st Dr NE Address: 16821 Smokey Point Blvd City,State Zip:SILVANA,WA 98287 City,State Zip:Arlington,WA 98223 City,State Zip:Arlington,WA 98223 Phone: Phone:425-890-8779 Phone:425-322-8077 LIC: EXP: MECHANICAL CONTRACTOR = PLUMBING CONTRACTOR ' Name:Dudley's Heating and Air Conditioning Name: Address: 16821 Smokey Point Blvd Address: City,State,Zip:Arlington,WA 98223 City,State,Zip: Phone:425-322-8077 Phone: LIC#:DUDLE**932N7 EXP: 09/28/2019 LIC#: EXP: JOB DESCRIPTION V PERMIT TYPE: Residential Mechanical CODE YEAR: 2015 STORIES: CONST.TYPE: DWELLING UNITS: OCC GROUP: BUILDINGS: OCC LOAD: PERMIT APPROVAL I AGREE TO COMPLY WITH CITY AND STATE LAWS REGULATING CONSTRUCTION AND IN DOING THE WORK AUTHORIZED THEREBY; NO PERSON WILL BE EMPLOYED IN VIOLATION OF THE LABOR CODE OF THE STATE OF WASHINGTON RELATING TO WORKMEN'S COMPENSATION INSURANCE AND RCW 18.27. THIS APPLICATION IS NOT A PERMIT UNTIL SIGNED BY THE BUILDING OFFICIAL OR HIS/HER DEPUTY AND ALL FEES ARE PAID. IT IS UNLAWFUL TO USE OR OCCUPY A BUILDING OR STRUCTURE UNTIL A FINAL INSPECTION HAS BEEN MADE AND APPROVAL OR A CERTIFICATE OF OCCUPANCY HAS BEEN GRANTED. IBC110/IRC110. SALES TAX NOTICE:Sales tax relating to construction and construction materials in the City of Arlington must be reported on your sales tax return form and coded City of Arlington#3101. Signature Print Name Date Released By Date CONDITIONS Pipe shall be pressurized at 15-20 lbs (psi) for minimum 2 hours. Adhere to approved appliances. Call for inspection. THIS PERMIT AUTHORIZS ONLY THE WORK NOTED.THIS PERMIT COVERS WORK TO BE DONE ON PRIVATE PROPERTY ONLY. ANY CONSTRUCTION ON THE PUBLIC DOMAIN(CURBS,SIDEWALKS,DRIVEWAYS,MARQUEES,ETC.)WILL REQUIRE SEPARATE PERMISSION. �ERMIT FEES Date Description Fee Amount 6/17/2019 Gas Outlets Base Fee 1 to 5 $10.00 6/17/2019 Mechanical Fee(Enter Fixture Fee) $25.00 6/17/2019 Mechanical Permit Base Fee $25.00 Total Due: $60.00 Total Payment: $0.00 Balance Due: $60.00 CALL FOR INSPECTIONS - BUILDING(360)403-3417 When calling for an inspection please leave the following information: Permit Number,Type of Inspection being requested,and whether you prefer morning or afternoon CITY OF ARLINGTON 238 N. OLYMPIC AVE -ARLINGTON, WA. 98223 PHONE; (360) 403-3551 BUILDING PERMIT Address:19713-1/2 51st Dr NE Permit#:2617 Parcel#:00426400005000 Valuation:0.00 OWNER APPLICANT CONTRACTOR Name:MATTHEWS CELINDA Name:Celinda Matthews Name:Dudley's Heating and Air Conditioning Address:PO BOX 219 Address:19713 51st Dr NE Address: 16821 Smokey Point Blvd City,State Zip:SILVANA,WA 98287 City,State Zip:Arlington,WA 98223 City,State Zip:Arlington,WA 98223 Phone: Phone:425-890-8779 Phone:425-322-8077 LIC: EXP: MECHANICAL CONTRACTOR PLUMBING CONTRACTOR Name:Dudley's Heating and Air Conditioning Name: Address: 16821 Smolcey Point Blvd Address: City,State,Zip:Arlington,WA 98223 City,State,Zip: Phone:425-322-8077 Phone: LIC#:DUDLE**932N7 EXP: 09/28/2019 LIC#: EXP: JOB DESCRIPTION IWW PERMIT TYPE: Residential Mechanical CODE YEAR: 2015 STORIES: CONST.TYPE: DWELLING UNITS: OCC GROUP: BUILDINGS: OCC LOAD: PERMIT APPROVAL I AGREE TO COMPLY WITH CITY AND STATE LAWS REGULATING CONSTRUCTION AND IN DOING THE WORK AUTHORIZED THEREBY; NO PERSON WILL BE EMPLOYED IN VIOLATION OF THE LABOR CODE OF THE STATE OF WASHINGTON RELATING TO WORKMEN'S COMPENSATION INSURANCE AND RCW 18.27. THIS APPLICATION IS NOT A PERMIT UNTIL SIGNED BY THE BUILDING OFFICIAL OR HIS/HER DEPUTY AND ALL FEES ARE PAID. IT 1S UNLAWFUL TO USE OR OCCUPY A BUILDING OR STRUCTURE UNTIL A FINAL INSPECTION HAS BEEN MADE AND APPROVAL OR A CERTIFICATE OF OCCUPANCY HAS BEEN GRANTED. IBC I0/IRCI10. SALES TAX NOTICE:Sale tax relating to construction and construction materials in the City of Arlington m t be reported ory your sales tax re irn b rm and coded Ci of ' to 31 r - �� - � --- LC l Signature'- Print Name Date Rcic cd By Date CONDITIONS - Pipe shall be pressurized at 15-20 lbs (psi) for minimum 2 hours. Adhere to proved appliances. Call for inspection. THIS PERMIT AUTHORIZS ONLY THE WORK NOTED.THIS PERMIT COVERS WORK TO BE DONE ON PRIVATE PROPERTY ONLY. ANY CONSTRUCTION ON THE PUBLIC DOMAIN(CURBS,SIDEWALKS,DRIVEWAYS,MARQUEES,ETC.)WILL REQUIRE SEPARATE PERMISSION. -- ''�' �� PERMIT FEES Date Description Fee Amount 6/17/2019 Gas Outlets Base Fee 1 to 5 $10.00 6/17/2019 Mechanical Fee(Enter Fixture Fee) $25.00 6/17/2019 Mechanical Permit Base Fee $25.00 Total Due: $60.00 Total Payment: $0.00 Balance Due: $60.00 CALL FOR INSPECTIONS BUILDING(360)403-3417 When calling for an inspection please leave the following information: Permit Number,Type of Inspection being requested,and whether you prefer morning or afternoon I MCml V & BCml V InstallationManual Operation (no) . o 0 '�I i.0 Transfer — On/Off 11•I11-0 PM 1.1_I U o Mode Shower Saver O O O O O Bath Fill 171 0 �IIII Transfer Temperature Sound Volume Water Volume Rhmal Clock Rinnai A guide on how to use and install Rinnai deluxe water controllers This guide is for the use and installation of Rinnai Deluxe water controller models Compatible Rinnai water heater models: MC-100V and BC-100V. Infinity XR32 HD-200 Infinity XR26 HD-200i These instructions must be used in conjunction Infinity XR24 HD-250 with the Rinnai Water Heater Operation / Infinity XR20 HD-250i Installation Manual supplied with Rinnai water Infinity XR18 heaters. Infinity XR16 These water controllers are compatible only Infinity XR26i with the Rinnai water heater and other water Infinity XRPIus 26 Infinity XRPIus 2 controller models shown. Efficiency 24 Refer to the table located on page 1 of this manual to confirm the maximum number and Compatible Rinnai water controller: combination of controllers that can be fitted to Universal wired controller MC-91 our Rinnai water heater model. Wireless controller MC502S This appliance shall be installed in accordance with: Manufacturer's Installation Instructions Current ASINZS 111 II CodesLocal Regulations and Municipal Building This appliance must be installed,serviced and removed by an Authorised • REGULATORY INFORMATION Controllers and water heaters must be installed correctly by an authorised person. The installation of gas, water, and electricity must conform to local regulations. The installation must also comply with the instructions supplied by Rinnai. Please keep this instruction booklet in a safe place for future reference. All dimensions referred to in these instructions are in millimetres, unless otherwise specified. WARNING ABOUT HOT WATER Excessively hot water is dangerous, especially for young children and the infirm. Rinnai water heaters allow you to control the temperature of hot water to safe levels. DANGER BEWAREWater temperatures above 55°C can cause severe burns instantly and may even result in SCALDING HAZARDSdeath.Those most at risk are children,disabled, elderly and the infirm. Hot water at 650C (the average hot water temperature in New Zealand) can severely burn a child in less than half a second. At 550C it takes half a minute. HOT! ALWAYS...... Test the temperature of the water with your HOT! elbow before placing your child in the bath, also carefully feel water before bathing or showering yourself. Supervise children whenever they are in the bathroom. Make sure that the hot water tap is turned off tightly. CONSIDER..... Installing child proof tap covers or child resistant taps (both approaches will prevent a small hand being able to turn on the tap). Setting your appliance at a maximum temperature of 550C (Contact Rinnai New Zealand). NEVER..... Leave a toddler in the care of another child. They may not understand the need to have the water temperature set at a safe level. Rinnai New Zealand i Operation Manual:01-07 OPERATION MANUAL REGULATORY INFORMATION...................................................................................i WARNING ABOUT HOT WATER................................................................................i GENERAL WATER CONTROLLER INFORMATION .................................................1 DELUXE WATER CONTROLLERS............................................................................2 ABOUT THE DELUXE KITCHEN WATER CONTROLLER (MC-100V).......................................2 HOW TO USE THE DELUXE KITCHEN WATER CONTROLLER (MC-100V)............................2 ABOUT THE DELUXE BATHROOM WATER CONTROLLER (BC-100V) ..................................4 HOW TO USE THE DELUXE BATHROOM WATER CONTROLLER (BC-100V)........................4 OPERATING THE SHOWER SAVER/ BATH FILL FUNCTION..................................................6 USING MULTIPLE CONTROLLERS............................................................................................7 COMBINING UNIVERSAL AND DELUXE CONTROLLERS........................................................ 7 WATER CONTROLLER INSTALLATION...................................................................8 WATERCONTROLLERS............................................................................................................. 8 POSITIONING OF WATER CONTROLLERS .............................................................................. 8 WATER CONTROLLER CABLES................................................................................................8 FITTING THE `DELUXE KITCHEN' WATER CONTROLLER (MC-100V)....................................8 FITTING THE 'DELUXE BATHROOM' WATER CONTROLLER (BC-100V)............................... 9 CONTACT INFORMATION .......................................................................................13 Rinnai New Zealand ii Operation Manual:01-07 GENERAL WATER CONTROLLER INFORMATION Temperature water controllers allow precise temperature control by the user. When used correctly, the hot water unit will deliver the selected temperature, even when the water flow is varied, or more than one tap is in use. Each water controller can be individually programmed, however the water heater can only deliver one set temperature at any time. The available temperatures (°C) are as follows: Kitchen Controller: 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 48, 50, 55°C* (60oC, 65°C, 75°C HD models only ) Bathroom Controller: Hot Water Delivery: 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 48, 50°C Bath fill Delivery: 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48°C Whilst hot water outlets are open the set temperature may be lowered. However the set temperature cannot then be raised above 43°C. In addition transfer of'priority' between controllers is not possible. These are safety features. Suggested temperatures are: Kitchen 50°C - 55°C* Shower 37°C -43°C, Bath fill 39°C -45°C Temperature may not be available on all installations.Rinnai water heaters can be programmed to deliver higher temperatures via the kitchen controller. Contact Rinnai for more details. These temperatures are suggestions only. You may find higher or lower temperatures more comfortable. Maintaining lower temperatures helps save energy. To obtain water temperatures lower than 37°C simply add cold water. Water controllers are an optional extra. 'Universal' and 'Deluxe' water controllers can be fitted. Universal Controllers allow temperature selection only. Deluxe controllers allow temperature selection, bath fill and have a clock function. Water controllers allow the water temperature to be set from the various locations where they are installed. The temperature selected will be available to all outlets. Universal (MC-91-2A) and Deluxe (MC-100V& BC-100V) Controllers - available configuration: A maximum of 4 water controllers can be fitted.Any combination of the deluxe, universal and wireless controllers can be used with the following limitations. Only ONE master controller can be installed. This can be MC-100V, a MC-91 (when programmed as a master controller)or a MC502S (wireless)controller. Up to TWO BC-100V water controllers can be installed. The FOURTH water controller in any installation MUST BE a MC502S (wireless)or a MC-91. Rinnai New Zealand 1 Operation Manual:01-07 DELUXE WATER CONTROLLERS ABOUT THE DELUXE KITCHEN WATER CONTROLLER(MC-100V) SHOWERWATER TEMPERATURE INDICATOR BATH FILL INDICATOR • •- Indicates the selected hot water Indicates that the Shower Saver I temperature. Bath Fill function is operating. UP AND DOWN BUTTONS WATER HEATER When in Normal mode these Use'INDICATOR buttons are used to select the Indicates that the water heater is in - water temperature. operation and delivering hot water. • tj� In'Setup'mode these buttons are used to adjust the voice prompt volume and to set the clock. 12 Hour AM 1 PM clock display. PM Mode In the event of a fault,codes for MODE BUTTON error messages will flash here. o o Used to swith the controller between Normal,Voice or Clock L SPEAKER On/Off Transfer modes. Ri"ai TRANSFER BUTTON Used to transfer control priority between the temperature controllers.The controller with ON/OFF priority has command of the hot water delivery temperature.This Used to switch the water heater on and button is illuminated when this off.This button is illuminated when the controller has priority. hot water heating system is on. HOW TO USE THE DELUXE KITCHEN WATER CONTROLLER (MC-100V) Turning on the Controller If the controller is switched off (No digits other than the clock digits displayed in the digital monitor) press the On/Off button once. I I I. The On/Off and Transfer buttons illuminate to indicate that the hot AM PM Mode water unit will be ready to supply hot water once a hot water tap is opened. O Off Transfer If more than one controller is fitted press the 'Transfer' 0 button to Rinnai transfer priority to the desired controller. QThe MC-100V controller is not water resistant, avoid direct exposure to water or NOTE steam as these conditions may cause damage. Setting The Clock The clock is a 12 hour AM/PM style display. To set the time press the 'Mode' Mode button twice, this places the controller into clock setting mode, in the digital monitor the word 'Clock' will be displayed and the clock digits will flash, if this is the first time the clock has been set the starting time will be AM 12:00. Use the 0 or [v] buttons to select the desired time, holding these buttons down continuously cycles the digits.When you get close to the time you wish to set, press the button intermittently to avoid going further than the desired time. Rinnai New Zealand 2 Operation Manual:01-07 DELUXE WATER CONTROLLERS To return to normal mode press the 'Mode' Mode button once,if no buttons are pressed for a period of approximately 10 seconds the controller will return to normal mode. Mode O Mode O ""k ryry Clock AM 12:UU nn'll)l PM ,Usm1) Q AM 7.0 Mode Mode Li LLJ f r 7'L RRII&1RlRI181 The time is always displayed regardless of whether the Water Controller is turned ON or OFF. The clock may need reseting if power to the water heater unit is disrupted due to a power failure or if the power is switched off over a prolonged period. Setting The Sound Options To set the sound options press the 'Mode' (M�D button once to place the controller into 'Voice' mode. Use the (�il or [�] buttons to select the desired audible setting as follows: Voice High, Med, Low or Off, sets the voice prompt volume but does not affect the audible tones. Sound Off, mutes all voice prompts and audible tones. To return to normal mode press the 'Mode' Mede button once, if no buttons are pressed for a period of approximately 10 seconds the controller will return to normal mode. Voice prompts only available when Deluxe Bathroom water controller(s) are installed. OTE Adjusting Temperature Simply press the 'hot water temp' 1�1 or 0 buttons until the required temperature is displayed on the Digital Monitor. ON! COLD To operate the water heater, open any hot water tap. This will automatically light the burner, providing hot water. The 'In Use' indicator 6 will illuminate on the Water Controller. HOT Once the hot water is running, if the set temperature is either too hot or cold press the 0 or buttons until the desired temperature is reached. Whilst hot water outlets are open the set temperature may be lowered. However they cannot then be raised above 43°C. In addition transfer of'priority' between controllers is not possible. These are safety features. CHECK WATER TEMPERATURE BEFORE USE. A parent or carer should always check the temperature before a child is placed CAUTION in contact with hot water. Rinnai New Zealand 3 Operation Manual:01-07 DELUXE WATER CONTROLLERS ABOUT THE DELUXE BATHROOM WATER CONTROLLER(BC-100V) INDICATORWATER TEMPERATURE WATER VOLUME SHOWER SAVER INDICAT• Indicates Shower Saver 1 Bath Fill BUTTONBATH FILL Indicates the selected hot water volume selected. Used to select Shower Saver/Bath Fill temperature. function.This button is illuminated when the Shower Saver/Bath Fill function is SHOWER AVER selected. INDICATOR WATER HEATER BATH FILL _ Indicates that the Shower Saver 1 Bath • 11 Fill function has been selected and that ON/OFF BUTTON Indicates that the water heater is in a shower is running or the bath is filling. Used to switch the water heater on and operation and delivering hot water. off.This button is illuminated when the hot water heating system is on. BUTTONTRANSFER Used to transfer control priority between • • the temperature controllers.The controller with priority has command of the hot water delivery temperature.This button is illuminated when this controller o 0 has priority. Transfer , 1 tt '$ On/Off 11_IC 11111 IUD 0 Shower Saver O O O O O Bath Fill 0 0 0 0 o Temperature I Sound Volume Water Volume R"mai cloak VOLUMESPEAKER WATER • CLOCK Used to select Shower Saver I Bath Fill VOLUME • •- TEMPERATURE BUTTONS volumes. 12 Hour AM 1 PM clock display. In Normal and Bath Fill/Shower Saver modes these buttons are used to select Indicates how much water still needs to the water temperature. CLOCK SETTING BUTTO flow for the selected Shower Saver 1 Used select clock setting mode. Bath Fill volume, decreasing while In'Clock'mode these button are used to shower runs or bath fills. set the clock. F- SOUND VOLUME BUTTON In the event of a fault,error message Used to select the voice and audible tone codes will flash here. options. HOW TO USE THE DELUXE BATHROOM Water CONTROLLER (BC-100V) Turning on the Controller If the controller is switched off (No digits other than the clock digits displayed in the digital monitor) press the On/Off button once. Tfd05fef 44rt ° ff The On/Off and Transfer buttons illuminate to indicate that the hot water unit will be ready to supply hot water 0��� Tempeaature Souna Volume once a hot water tap is opened. xinnai If more than one controller is fitted press the `Transfer' button to transfer priority to the desired controller. ' Refer to page 1 to confirm the maximum number and combination of water controllers that can be fitted to your Water Heater model. • E Avoid getting water directly in the speaker as this may cause damage. Rinnai New Zealand 4 Operation Manual:01-07 DELUXE WATER CONTROLLERS Setting The Clock The clock is a 12 hour AM/PM style display. Transfer To set the time press the 'Clock' o button once, this ula 1i._1 1 places the controller into clock setting mode, in the owersaver 0 0 0 0 o Bath Fill digital monitor the clock digits will flash, if this is the first time the clock has been set the starting time will be AM O 12:00. 0 way Clock 0 Use the 'Temperature' IAI or [v] buttons to select the A desired time, holding these buttons down continuously cycles the digits. When you get close to the time you Transfer On/Off wish to set, press the button intermittently to avoid going further than the desired time. Sower Saver Bath Fill To return to normal mode press the 'Clock' Ebutton L2L s° me w,e. "me once, if no buttons are pressed for a period of approximately 60 seconds the controller will return to normal mode. i ' The time is always displayed regardless of whether the Water Controller is Transfer f() On/Off NOTE turned ON or OFF. f�f Shower The clock may need reseting if power to o O O O O Bath F,ll the water heater unit is disrupted due to m,e,a,",e =°""aw°,"me me a power failure or if the power is O 0 O O tea: "°`k switched off over a prolonged period. Setting The Sound Options To set the sound options press the 'Sound Volume' ,,ilk button and select the desired audible setting as follows: Voice High, Med, Low or Off, sets the voice prompt volume but does not affect the audible tones. Sound OFF, mutes all voice prompts and audible tones. Press any of the IAI or [w] buttons to return to normal mode, if no buttons are pressed for a period of approximately 10 seconds the controller will return to normal mode. Adjusting Temperature Simply press the'Temperature' 0 or [�] buttons until the required ON! COLD temperature is displayed on the digital monitor. 0 To operate the water heater, open any hot water tap. This will automatically light the burner, providing hot water. The 'In Use' indicator 6 will illuminate on all Water Controllers. HOT Once the hot water is running, if the set temperature is either too hot or cold press the 'Temperature' or 0 buttons until the desired temperature is reached. Whilst hot water outlets are open the set temperature may be lowered. However they cannot then be raised above 43°C. In addition transfer of'priority' between controllers is not possible. These are safety features. CHECK WATER TEMPERATURE BEFORE USE. A parent or carer should always check the temperature before a child is placed CAUTION in contact with hot water. Rinnai New Zealand 5 Operation Manual:01-07 DELUXE WATER CONTROLLERS OPERATING THE SHOWER SAVER/ BATH FILL FUNCTION The 'Shower Saver/ Bath Fill' function allows a preset water volume and temperature to be selected and run a automatically. Transfer ,�� e on/Off No voice prompts will be available if the Shower er 'Voice OFF' or'Sound OFF' options are O O o O O B Q;II selected. With 'Sound OFF' there will O 0 ,till Temv.r.tvr. so.oa vomm. wa<..vomm. IV also be no audible tones. Initial Settings i When a deluxe bathroom controller is first turned on,the default shower/bath fill temperature is set to 40°C and Transfer ,,� S�'Q On/Off the shower/bath volume is set to 100 litres.The shower f�° ,,,, / bath volume can be lowered to a minimum of 30 litres ���� or raised to a maximum of 400 litres and the owe aer o - o o o Bath Fill temperature adjusted as desired. �dl 0 0 0 0 o remnera Q soea vowme ware,vomme o Rinnai Clock Setting Shower/ Bath Temperature and Volume With the system on,select a Deluxe Bathroom controller and ensure that it currently has priority. If it does not i have priority press the 'Transfer' 0 button once and o. the 'Transfer' button will illuminate. T 5ef '4 3, s Q of Press 'Shower Saver / Bath Fill' 9 button once. The ,--'►'_1 'Shower Saver / Bath fill' button will illuminate and a Bath Fill voice prompt and tone will sound. ,,ill 0 - Imneretvre I...d vommw w.ter vo 0 To select the desired delivery temperature use the O 0 Rinnai 01ock 'Temperature' 0 or [�] buttons. The selected temperature will be displayed on the digital monitor and will remain as the default 'Shower Saver / Bath Fill' temperature until it is changed or if the mains power is turned off for an extended period. To select the volume of water to be used in the shower / bath use the 'Water Volume' 0 or buttons. The selected volume is displayed in large digits to the right and will remain as the default 'Water Volume' until it is changed or if the mains power is turned off for an extended period. The selected volume is also repeated in the form of a remaining volume counter below the temperature and replaces the clock during 'Shower Saver/ Bath Fill' operations. When filling a bath for the first time, it is recommended that a low bath fill volume such as 60 litres or lower be used. During any subsequent bath fills the volume can then be adjusted to suit your known bath volume and or desired fill level. Q Be careful not to overfill the bath, an average bath volume is 160 litres. It is recommended that when filling a bath for the first time you should: NOTE Remain by the bath during the filling process. • Use a low bath fill volume such as 60 litres or less. Using Shower Saver/Bath Fill Press 'Shower Saver/ Bath Fill' 0 button once. The 'Shower Saver/ Bath fill' button will illuminate and a voice prompt and tone will sound. During 'Shower Saver / Bath Fill' operations the 'Bath' indicator will also be displayed in the deluxe kitchen water controller digital monitor(when fitted). Rinnai New Zealand 6 Operation Manual:01-07 DELUXE WATER CONTROLLERS The voice prompt will say "The hot water system is ready. Open the hot water tap". Open the hot water tap for the relevant shower or bath. ON! COLD The 'In Use' indicator nq� will illuminate on all deluxe water controllers and the shower will run or the bath will start to fill. HOT To Stop Shower Saver/ Bath Fill Operation Y p ° �p PY p � � t_tro I you wish to stop the water low whilst the shower saver / bath fill function Is in operation, simply press the Tra�,fe� , s�Q oof, 1 'Shower Saver/ Bath fill' 0 button. ;;;; Sh-�S.r The 'Shower Saver / Bath fill' button will flash and the o O �!l� o O B 0 voice prompt will say"Hot water is not available,Turn off 0 0 0 all hot water taps and push the 'Bath fill' button". Follow Rinnai the voice prompt instructions. When Shower Saver/ Bath Fill Operations Finishes Once the shower saver/ bath fill operation finishes the following events will occur: 1. The flow from the shower/bath hot water tap ceases. -11 OFF! COLD o 2. The 'Shower Saver/Bath fill' button will flash. ShuwarS ver Shower Saver Bath Fill 3. The deluxe kitchen water controller 'Bath' indicator Bat Fill Q will flash. 4. A tone will sound. 5. The voice prompt will say"Bath fill is complete. Turn HOT off the bath hot water tap and push the bath fill button." Follow the voice prompts instructions. Note that the water heater will not allow hot water to flow from any fixture until the 'Shower Saver/Bath fill' 0 button has been pressed. 6. The'Shower Saver/Bath fill' button light on the Bathroom Controller and the'Bath' indicator on the deluxe kitchen water controller monitor(when fitted)will go out. QCHECK WATER TEMPERATURE BEFORE USE. 1 A parent or carer should always check the temperature before a child is placed CAUTION in contact with hot water. NEVER LEAVE YOUNG CHILDREN UNATTENDED IN THE BATH. When using the 'Shower saver/ Bath fill' function, ALWAYS close the hot water tap for the bath or shower after the flow has stopped. Whilst hot water outlets are open the set temperature may be lowered. However they cannot then be raised above 43°C. In addition transfer of'priority' between e controllers is not possible. These are safety features. USING MULTIPLE CONTROLLERS The water heater can be turned on and off at any water controller. If more than one water controller is fitted press the 'Transfer' 0 button to transfer priority to the desired water controller. COMBINING UNIVERSAL AND DELUXE CONTROLLERS Universal and Deluxe Controllers can be combined and will function as described in other sections of the Water Heater Operation / Installation Manual. Refer to page 1 to confirm the maximum number and combination of water controllers that can be fitted to your water heater model. Rinnai New Zealand 7 Operation Manual:01-07 WATER CONTROLLER INSTALLATION WATER CONTROLLERS Water Controllers are available as an optional extra. Universal and Deluxe Controller can be used together and will function as described in the Operation Section of this manual. Please refer to page 1 to confirm the maximum number and combination of controllers that can be fitted. Other manufacturers water controllers are NOT compatible with Rinnai water heaters. These water controllers must not be used with any Solar Boost water e heater. 14 Rinnai water controllers brought in from other countries are not compatible with Rinnai appliances sold in New Zealand. POSITIONING OF WATER CONTROLLERS Water controllers must be installed in shaded and clean locations. They should be fitted out of reach of children (suggested height from floor to be at least 1500 mm). BC-100V water controllers are water resistant, however,durability is improved when positioned outside the shower recess.All deluxe water controllers must be installed at least 400 mm above the highest part of a sink, basin or bath. • Do not install water controllers near a heat source, such as a cook top, stove or oven. Heat, steam, smoke and hot oil may cause damage. NOTE Do not install water controllers in direct sunlight. • The MC-100V water contoller MUST NOT be installed in a bathroom. • Do not install water controllers outdoors unless protection from dust ingress and sunlight are provided. • Do not install water controllers against a metal wall unless the wall is earthed in accordance with AS/NZS3000. • Water controllers MUST NOT be installed where chemicals such as benzine, alcohol, turpentine or other similar chemicals are in use. POSITIONING CONSIDERATIONS FOR THE MC-100V WATER CONTROLLER. The MC-100V uses a Liquid Crystal Display (LCD) for the digital monitor. Light reflections can make the LCD difficult to see at direct eye level. 441 For best results when Installing the MC-100V mount the water controller lower than your eye-level to avoid these light reflections. WATER CONTROLLER CABLES Water controllers operate at extra low voltage (12 Volts DC)which is supplied from the water heater. Controllers come supplied with 15 m of electrical cable.The appliance end of the controller cables are fitted with spade terminals. Extension cabling is available from Rinnai. Alternatively two core sheathed (double insulated) flex with minimum cross- sectional area of 0.5 mm' may be used. Maximum individual cable runs should not exceed 50 m. FITTING THE `DELUXE KITCHEN' WATER CONTROLLER (MC-100V) 1. Determine the most suitable position for the water controller (see note under"POSITIONING OF CONTROLLERS"on previous page). o C U 2. Use the wall mounting bracket as a template to mark and drill 3 holes, locating the cable access hole as shown in Fig. 1. a U) : �o 3. Fix the mounting bracket to the wall using the approriate fixings. Q in 128 4. Run the water controller cable through the hole in the wall. Fig.1 Rinnai New Zealand 8 Installation Manual:01-07 WATER CONTROLLER INSTALLATION 5. Carefully remove face plate from water controller, using a screw driver. (Fig. 2) 6. Connect the controller cable to the kitchen water controller as shown in Fig 3.At this point cables from other controllers (if fitted) may also be connected to the kitchen water terminals (Fig. 4) eliminating the need for multiple cable runs directly to the water heater.Water controllers are not polarity sensitive. Feed excess cable lengths into the wall cavity to avoid the pinching of cables between the wall and the water controllers. 7. Fasten the water controllers to the wall mounting bracket as shown in Fig. 5. Avoid the use of impact drills and the over-tightening of fixings as this may damage the water controllers. 8. Remove the protective plastic film from the water controller digital monitor. 9. Replace the face plate. JU ❑ D 6 � 0 Fig. 2 Fig. 3 Fig. 4 Fig. 5 FITTING THE `DELUXE BATHROOM' WATER CONTROLLER(BC-100V) 1. Determine the most suitable position for the water controller(see note under"POSITIONING OF WATER CONTROLLERS"on previous page). 2. Mark and drill 3 holes, locating the cable access hole as shown in Outline of Water Controller Fig. 1. 181 3. When running a cable through the access hole ensure the connector ________ _ __ end of the cable is located nearest to the controller. (Fig. 2) s�eWn9 020 Cable Access 4. Affix the double sided self-adhesive seal to the back of the water zoz........................................... controller. (Fig. 3) Fig. 1 5. Carefully remove the face plate from the water controller, do this by placing your thumbs on the front of the digital display and while water Controller Cable hooking your fingers behind top of plate and gently push as shown in Fig.4, DO NOT use a screwdriver as this may damage the controller. 0 6. Connect the cable to the bathroom water controller. Feed excess Connector cable lengths into the wall cavity to avoid the pinching of cables between the wall and the controller. Fig, 2 7. Fix the bathroom controller to the wall using the approriate fixings as shown in Fig. 5, avoid the use of impact drills and the over-tightening of fixings as this may damage the water controller. Backing Seal IIIIE �Do O � II 00� ❑ oo�0 �' Remove O ❑ to expose self-adhesive Fig. 3 Fig. 4 Fig. 5 8. Remove the protective plastic film from the controller's digital monitor. 9. Replace the face plate. Rinnai New Zealand 9 Installation Manual:01-07 WATER CONTROLLER INSTALLATION CONNECTING COMMUNICATION CABLES TO THE WATER HEATER Communication cables connect the water heater to water controllers and operate at an extra low voltage (12 Volts DC) which is supplied from the water heater. Communication cables are supplied with the water controllers(15m)and are fitted with spade terminals for connection to water heater. Up to two cables can be connected directly to the cable connector at the water heater. Extension cables are available from Rinnai.Alternatively,two core sheathed (double insulated)flex with minimum cross sectional area of 0.5mm2 may be used. Cable lengths must not exceed 20 metres. QDO NOT attempt to connect cables to the cable connector at the water heater unless the electric power to the water heater is switched `off' otherwise damage to electrical CAUTION components may occur. To connect up to two cables to the cable connector 1. Isolate the electric power supply by switching the power point off and removing the power plug of the water heater from the electric power socket. 2. Remove the retaining screw @ of the cable connector at the base of the appliance. 3. Swing the cable connector door open and thread the cable through the weather seal of the cable access hole © in the direction shown allowing sufficient cable length so that the sheath of the cable can be secured with cable clamp © supplied with the transceiver. 4. Loosen screw terminals QD and Q and connect the cable spade connectors to these terminals and re-tighten. Polarity is not important, either wire colour can be connected to either terminal. 5. Return the cable connector to the original position taking care not to damage cable wires in the process and replace the retaining screw Q. A B 47 o k 0 D D ® + � E C E The cable connector for water heater models: The cable connector for water heater models: INFINITY XR26,XR24,XR20,XR18,XR16 and HD200 INFINITY XR32,XR26i,HD250,HD250i,HD200i,and Efficiency24 Connecting Three or Four Controllers Repeat steps 1, 2 and 3 above. To connect three or four cables,seperate all the cables to be fitted into pairs. Cut off the existing spade connectors from each pair and re- terminate each pair into a new spade connector (available from your local electrical component retailer) Q so that there are only two sets of spade connectors (4 spade connectors in total)to be terminated. Three Four Repeat steps 4 and 5 above. Cables Cables Rinnai New Zealand 10 Installation Manual:01-7 Rinnai New Zealand 11 Installation Manual:01-07 Rinnai New Zealand 12 Installation Manual:01-7 Customer Contacts Consumer Enquiries: 0800 746624 (0800 RINNAI) Installer Enquiries: 0800 86746624 (0800 TORINNAI) Rinnai New Zealand Limited 691 Mt.Albert Road, PO wwwlr info@ri ox 24068 Royal clo.nz Auckland I I I I I I II I I I I I I II II U220-1149(00) 2008.01 060 00012 52829 9 13 RA TSD Issue 27/12/07 Permit#: 2617 Permit Date: 06/17/19 Permit Type: RESIDENTIAL MECHANICAL Project Name: Matthews Gas line Install Applicant Name: Celinda Matthews Applicant Address: 19713 51 st Dr NE Applicant, City, State, Zip: Arlington,WA 98223 Contact: Celinda Matthews Phone: 425-890-8779 Email: wapikwan60@gmail.com Scope of Work: Install TWH and Gas range w/gas line install Valuation: 0.00 Square Feet: 0 Number of Stories: 0 Construction Type: Occupancy Group: ID Code: Permit Issued: 06/20/2019 Permit Expires: Form Permit Type: Status: COMPLETE Assigned To: Raelynn Jones Property Parcel# Address Legal Description Owner Name Owner Phone Zoning 00426400005000 19713 51 ST DR NE MATTHEWS 122 Two Family CELINDA Residence(Duplex) Contractors Contractor Primary Contact Phone Address Contractor Type License License# Dudley's Heating and Air David Dudley 425-322-8077 16821 Smokey CONSTRUCTION DUDLE**932N7 Conditioning Point Blvd CONTRACTOR Inspections Date Inspection Type Description Scheduled Date Completed Date Inspector Status 09/01/2020 R09.GAS PIPING 09/01/2020 09/01/2020 BUILDING Approved ROUGH-IN CIO. AM 08/14/2019 MECHANICAL TWH/Gas Final 08/14/2019 BUILDING Completed ROUGH-IN Duplex Fees Fee Description Notes Amount Gas Piping/Units Enter#of units $10.00 Mechanical Fee(Enter Fixture Fee) 2 @$25 ea. $50.00 Mechanical Base Permit Fee $25.00 Processing/Technology $25.00 Credit Card Service $3.30 Total $113.30 Attached Letters Date Letter Description 06/17/2019 Building Permit Payments Date Paid By Description Payment Type Accepted By Amount 06/17/2019 Celinda Matthews 75797369 iTransact CC $110.00 06/17/2019 75797369 CC Surcharge Raelynn Jones $3.30 Outstanding Balance $0.00 Uploaded Files Date File Name 09/30/2021 9798321-2617 IC 9.1.2020.pdf 09/30/2021 9798322-2617 IC 9.2.2020.pdf 01/15/2020 6113710-2617 8-14-19IC.pdf 06/20/2019 5227226-2617 Signed Permit.pdf 06/17/2019 5209168-2617 Application and site nIan.pdf