Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
19704 60th Ave Ne_BLD2562_2026
NOTICE TO PERMITEE AND/OR OWNER ❑ PARTIAL APPROVAL ❑ CORRECTIONS REQUIRED ❑ DO NOT OCCUPY AAPPROVED PERMIT#:gLb 95G,a LOT#: DATE: JOB ADDRESS:F •70 04"",-i A�jI;Al TYPE OF INSPECTION: ' nAVAce ❑ NO PERMIT-STOP WORK-OBTAIN PERMIT:AND MAKE WORK COMPLY WITH CURRENT BUILDING AND/OR PLANNING CODES. ❑ CONSTRUCTION IS NOT IN ACCORDANCE WITH APPROVED PLANS AND PERMIT -STOP WORK: MAKE EXISTING WORK COMPLY WITH APPROVED PLAN AND PERMIT OR REMOVE IT. ❑ STOP WORK UNTIL AUTHORIZED TO CONTINUE BY INSPECTOR. ❑ CORRECTIONS LISTED BELOW MUST BE MADE BEFORE WORK CAN BE APPROVED. ❑ WORK NOT READY FOR INSPECTION:$50 REINSPECTION FEE(PER IBC) MUST BE PAID PRIOR TO NEXT INSPECTION. ❑ CONTACT INSPECTOR 360-403-3551 ❑ CALL FOR REINSPECTION S p-.nkL�- u-yJ�s -✓►der-�v - /Juss�c, THE ACTIONS OR CORRECTIONS INDICATED ABOVE ARE REQUIRED WITHIN DAYS OR PENALTIES IMPOSED BY LAW MAYAPPLY. FOR INSPECTION CALL: 360-403-3417 V 1, u tiecc., r tx,.,, 1 _ Co-11-19 INSPECTOR DATE Cl BUILDING DEPT. Cl PLANNING DEPT. CITY OF ARLINGTON y�. • r - � - . �� ..�. �r'•, -� � �4 i T i i i _ ,. I � � UTY OF ARLINGTON 1 238 N. OLYMPIC AVE - ARLINGTON, WA. 98223 PHONE; (360) 403-3551 BUILDING PERMIT Address:19704 60th Ave NE Permit#:2562 Parcel#:00746300001100 Valuation:4050.00 OWNER APPLICANT CONTRACTOR Name: 19704 Properties LLC Name:Unlimited Mechanical,Inc. Name:UNLIMITED MECHANICAL INC Address:7722 21st Ave NE Address:PO Box 1457 Address: 19221 63rd Avenue NE#2 City,State Zip:Seattle,WA 98115 City,State Zip:Marysville,WA 98270 City,State Zip:Arlington,WA 98223 Phone: Phone:425-583-4775 Phone:425-583-4775 LIC: EXP: MECHANICAL CONTRACTOR PLUMBING CONTRACTOR Name:Unlimited Mechanical,Inc Name: Address: 19221 63rd Ave NE#2 Address: City,State,Zip:Arlington,WA 98223 City,State,Zip: Phone:425-583-4775 Phone: LIC#:UNLIMM1093M6 EXP: 5/13/2020 LIC#: EXP: JOB DESCRIPTION PERMIT TYPE: Fire Sprinkler CODE YEAR: 2015 STORIES: CONST.TYPE: DWELLING UNITS: OCC GROUP: BUILDINGS: OCC LOAD: PERMIT APPROVAL I AGREE TO COMPLY WITH CITY AND STATE LAWS REGULATING CONSTRUCTION AND IN DOING THE WORK AUTHORIZED THEREBY, NO PERSON WILL BE EMPLOYED IN VIOLATION OF THE LABOR CODE OF THE STATE OF WASHINGTON RELATING TO WORKMEN'S COMPENSATION INSURANCE AND RCW 18.27. THIS APPLICATION IS NOT A PERMIT UNTIL SIGNED BY THE BUILDING OFFICIAL OR HIS/HER DEPUTY AND ALL FEES ARE PAID. IT IS UNLAWFUL TO USE OR OCCUPY A BUILDING OR STRUCTURE UNTIL A FINAL INSPECTION HAS BEEN MADE AND APPROVAL OR A CERTIFICATE OF OCCUPANCY HAS BEEN GRANTED. IBC110/IRC110. TIC :Salcs tax relating to construction and construction materials in the City of Arlington must be reported on your sales tax return form and co C'y of Arlington#3 l Signature Print Name Date Released By t Ditc CONDITIONS Permit and set of approved plans to remain on site during installation. 2.Significant deviations from approved plans made during installation shall be required to be resubmitted for review prior to inspections: may include hangers, earthquake bracing, sprinkler locations and pipe re-routing that could impact hydraulic calculations. Failure to submit revisions could result in cancellation of an inspection while a review of an as-built resubmittal is conducted. 3. Hangers and earthquake bracing shall be installed in accordance with NFPA 13. 4. Sway bracing required on 2 inch cross mains in Knit/Powder rooms. 5. Hydrostatic test required: System pressure for 2 hours minimum 6. Sprinkler system Contractors Material and Test Certificate shall be submitted prior to close out of permit. 7. Owner shall be provided with a set of approved plans and associated documents for their files. 8. Call at least 48 hours in advance to schedule inspections. THIS PERMIT AUTHORIZS ONLY THE WORK NOTED.THIS PERMIT COVERS WORK TO BE DONE ON PRIVATE PROPERTY ONLY. ANY CONSTRUCTION ON THE PUBLIC DOMAIN(CURBS,SIDEWALKS,DRIVEWAYS,MARQUEES,ETC.)WILL REQUIRE SEPARATE PERMISSION. PERMIT FEES Date Description Fee Amount 5/30/2019 Credit Card Surcharge $8.63 5/30/2019 Fire Review Fee $100.00 5/30/2019 Fire Sprinkler Fee $162.56 5/30/2019 Processing/Technology Fee $25.00 Total Due: $296.19 Total Payment: $296.19 Balance Due: $0.00 CALL FOR INSPECTIONS BUILDING(360)403-3417 When calling for an inspection please leave the following information: Permit Number,Type of Inspection being requested,and whether you prefer morning or afternoon KO Permit Information Date 5/16/2019 Permit Number 2562 Project Name Meeco Manufacturing-Fire Sprinkler Applicant Name Unlimited Mechanical, Inc. Applicant Address PO Box 1457 City,State,Zip Marysville,WA 98270 Contact Shelley Johnson Phone 425-583-4775 Email shelley@umifireprotection.com Permit Type Fire Sprinkler Site Address 19704 60th Ave NE Valuation 4050.00 Status Applied Permit Issued Permit Expires Square Feet 0 Type of Construction/Occupancy Load Commercial Fire Sprinkler Number of Stories 0 Proposed Use Assigned To Raelynn Jones Property Parcel Address Legal Owner Owner Phone Zoning 00746300001100 11970460THAVENE 1 119704 Properties LLC 1399 Other Miscellaneous Manufacturing NEC Contractors Contractor Name Primary Contact Phone Email Contractor Type License License# UNLIMITED MECHANICAL INCOhelley Johnson 25-583-4775 hello umifire rotection.com ;ONTRACTOR Labor&Industires NLIMM1093M6 Review Date Type Description Tar et Date Completed Date Assianed To Status 5/16/2019 =ire S rinkler 13uildina lin Review 5/16/2019 =ire Sprinkler Fire 111n Review Fees Fee Description Notes Amount Fire Review Fee 345.83.00.00 $100.00 Fire Sprinkler Fee 322.10.00.00 $162.56 Processing/Technology Fee 341.43.00.02 $25.00 Total $287.56 Uploaded Files Upload File File Uploaded By ____ 5/16/2019 3:40:01 PM 12562 pplication.r lJones,F nn x FIRE SPRINKLER PERMIT APPLICATION Department of Community &Economic Development City of Arlington• 18204 59th Ave NE• Arlington, WA 982-23• Phone(360) 403-3551 THIS APPLICATION MUST BE ACCOMPANIED BY TWO (2) SETS OF COMPLETE AND SCALED PLANS, TWO (2) SETS OF HYDRAULIC CALCULATIONS, TWO (2) SETS OF EQUIPMENT SPECIFICATIONS FOR EACH FIRE SPRINKLER PERMIT APPLICATION. INCLUDE ELECTRICAL PLANS WHERE APPLICABLE. ALSO INCLUDE SPECIFICATION SHEETS, WIRING DIAGRAMS (POINT TO POINT WIRING), AND ALL OTHER INFORMATION ON ALL EQUIPMENT TO BE INSTALLED PRIOR TO INSTALLATION. Type of Permit: ❑ New Fire Sprinkler Fire Sprinkler Add/Alt ❑ Underground Fire Line 19704 60th Ave NE Project Address: Parcel ID#: Project Valuation: 4,050.00 Number of Heads: 19 Building Area(Sci Ft): Owner: Meeco Phone Number: Address: City: State: Zip Code: Contact Person: Phone Number: Cell Phone. Emalk_ `_L: ll�u �'t r v.. C �� O Y;� c c 7 �(; � . c c•,, Address: City: `� State: Zip Code: Contractor: Unlimited Mechanical, Inc. Phone Number: 425-583-4775 Address: PO Box 1457 City: Marysville State: WA Zip Code:98270 Contractor's License Number: UMLIMM1093M6 Expiration:05/13/2020 Contact Person: Shelley Johnosn Email:shelley@umifireprotection.com I hereby certify that the above information is correct and that the construction on, and the occupancy and the use of the above- described property will be in accordance with the laws,rules and regulation of the State of Washington. -�.. I A q r 5 -/g - )9 Applican ig cure Date Print Appli ants Name ' Received FOR STAFF USE ONLY Permit# Accep y Amount Received Receipt# Date Received WEB Forms—131 Page 1 of 1 6/16LP ,� . a a � Search L&ISEARCH Labori industries Workplace Rights c Trades i Licensing c Washington State Department of " Labor & Industries UNLIMITED MECHANICAL INC Owner or tradesperson PO BOX 1457 MARYSVILLE,WA 98270 Principals 360-657-2182 WILLIAMS,WAYNE DAVID,PRESIDENT SNOHOMISH County License Verify the contractor's active registration/license/certification(depending on trade)and any past violations. Construction Contractor Active. Meets current requirements. License specialties FIRE PROTECT SYSTEM License no. UNLIMM1093M6 Effective—expiration 07/26/1991—05/13/2020 Bond No bond accounts during the previous 6 year period. Insurance Federated Mutual Ins Co $1,000,000.00 Policy no. 9161886 Received by L&I Effective date 10/23/2018 12101/2018 Expiration date 12/01/2019 Insurance history Savings .. ................ (in lieu of bond) $6,000.00 Received by L&I Effective date 07/2912009 07/29/2009 Release date Impaired date N/A N/A Savings account ID 47476822812705 (in lieu of bond) $4,000.00 Received by L&I Effective date nsrnamnn,2 nvnai�co� Workers' comp Do you know if the business has employees?If so,verify the business is up-to-date on workers'comp premiums. L&I Account ID Account is current. 812,167-00 Doing business as :-. i UNLIMITED MECHANICAL INC Fefi—fcrl...nrl—re ronnrfcr! Public Works Strikes and Debarments Verify the contractor is eligible to perform work on public works projects. Contractor Strikes Workplace safety and health Check for any past safety and health violations found on jobsites this business was responsible for. Inspection results date 08/08/2014 Violations Inspection no. H41p us improve GAT Y U� ArlingtonCity of r Fire Departmenti L!N G May 20, 2019 Permit Number: BLD 2562 Project Address: 19704 60th Avenue NE, Arlington Project Description: Fire Sprinkler Plans for Meeco Manufacturing Contractor: Unlimited Mechanical P.O. Box 1457 Marysville, WA 98270 Re: Fire Suppression Shop Drawing Review Comments/Approval The Arlington Fire Department has completed a review of the Fire Suppression shop drawing submittal and approved the issuance of the permit with the following conditions: 1. Permit and set of approved plans to remain on site during installation. 2. Significant deviations from approved plans made during installation shall be required to be resubmitted for review prior to inspections: may include hangers, earthquake bracing, sprinkler locations and pipe re- routing that could impact hydraulic calculations. Failure to submit revisions could result in cancellation of an inspection while a review of an as-built resubmittal is conducted. 3. Hangers and earthquake bracing shall be installed in accordance with NFPA 13. 4. Sway bracing required on 2 inch cross mains in Knit/Powder rooms. 5. Hydrostatic test required: System pressure for 2 hours minimum 6. Sprinkler system Contractor's Material and Test Certificate shall be submitted prior to close out of permit. 7. Owner shall be provided with a set of approved plans and associated documents for their files. 8. Call at least 48 hours in advance to schedule inspections. Items noted above are conditions on the issued permit and shall be verified as part of the final inspection of the system at project completion. Final approval will not be provided until all conditions are verified. If there are any questions please do not hesitate to call. Sincerely, ". Mike Makela Assistant Fire Chief Arlington Fire Department 6231 .. Fax: 1 �, � �`1 �rrrr����rrrrr�rrr��r�rrr�rr�7 ' WASHINGTON STATE � GERTWICATE OF COMrlTONCT FIRE PROTECTION SPRINKLER SYSTEMS ' 1 � 1 ' Christian Bernard Klein i 8616.0108-C L ' � Llnthmitr�d n i 11 UNLI? r ; 1 � 1 **Swgpwn v 12/31119 err rrrr�rrr rrr�rrrrr•�rr rrr�/ _ _ _ Fire Protection by Computer Design UMI PO BOX 1457 MARYSVILLE, WA 98270 Job Name MEECO FIRE BUILDING DEPARTMENT Building APPROVED Location System i DATE 5 29 By O Contract Data File ME FIRE Area 1.WXF NO CHANGES AUTHORIZED UNLESS APPROVED BY THE BUILDING INSPECTOR OFFICE COPY Recc �d 1 . Computer Programs by Hydratec Inc. Revision: 50.52.1 MAY 5 2019FLb Z5L#7— rn r r CV I—co co r M W O OLo N Cl)(D Cl) (D f4 .. .. .. .. .. d Q cn C v) (6 N^E O N-a 0) C LLa- CQ O E 2) - ao OCD 4) a)"a) f0 O O N Q O T T T LU(n(n U)aT �rNN OM (p �QQQ2Q(n E 0) Q O O N Ln O C O N N O O p r U 0) (6 a LO N T U = T N 00 E r N CDO O � Z O a O a J E Il p U O O Cl r O N — C3 O N N ��r 3 CD U j � 3 I N ` O LL T—— N Ta 7 ca ❑ O O U) cn �+ U @ N 0) r Q LL "(q LY x U o Q W i i i N corNN (n LL �UUU 0 O O O O O O U .T. IT Cl) N O O CD CD O O O O O O LL U r r r r r r O) 00 f— CO � '[Y Cl) CV r j L U 0- w L LI (n (n D w w S Q 04 oG § � 7 0 0 3 N oLO � CN � %± ° o $ 7 a3 m g o Q om & 2 � \ 2 e 2@ 2 = 2a m = 2 / R � �e m § § 22 M k j / CC) 2 2 o . ) k2 \ \ $ % 2 � � m E u- § o ) � UCOt% _ _ 5 I N w m a :3 M J ) Ef % � k m % ._ m 0 E 0 �� > CL LL ca? > k .§ f E f ) ii \ 22E I ° - )c t (D In o / _ &/ k � = � 7 \ mo fo = e � E on«m 5 � � � § 2 t / c � m o� j� \� / \ \ m _ _ i5 § @a) 2� 2E/ ± # oCNK« m k4 22tE § 2 / D o m33 � amE 'Eo �� o22g07 «ELL � \ a& � pJ2eC 0 cn / k 0 \ S 22 U) c $\%\ 2r *' -0 ® > >± = � £ cn E 22 � � 3 -: ) 6 e / e a f2 moo = ms ( 2/�K 5ocu CO IgtS 0 = > Cl)Q7» n 2kq % = ° ƒ = E }ƒ\± ƒ ® � EC � � \ LL b2 §§ m§ E _ ' m = 2\ S �¥ o x a � E q 3i k a") ii77 / } �e U) ® > k 5I /£ ' m 0a) k � $�/ LL _ Z> E < mWLL = 6 -i zw2inm2 Pressure / Flow Summary - S-, JDARD UMI Page 3 MEECO FIRE Date 3-21-19 Node Elevation K-Fact Pt Pn Flow Density Area Press No. Actual Actual Reg. 1 15.0 5.6 12.76 na 20.0 0.2 100 7.0 2 15.0 5.6 12.89 na 20.11 0.2 100 7.0 3 15.0 5.6 13.43 na 20.52 0.2 100 7.0 4 15.0 5.6 14.62 na 21.41 0.2 100 7.0 5 10.0 56 21.63 na 26.04 0.2 100 7.0 6 10.0 5.6 24.81 na 27.89 0.2 100 7.0 7 10.0 5.6 29.71 na 30.52 0.2 100 7.0 8 10.0 37.69 na 9 10.0 39.56 na TDP 20.0 55.75 na 10 20.0 60.38 na TOR 20.0 60.89 na CDR 3.0 69.51 na 13 15.0 12.76 na 14 15.0 12.76 na 15 15.0 5.6 12.76 na 20.0 0.2 100 7.0 16 15.0 5.6 12.95 na 20.15 0.2 100 7.0 17 15.0 5.6 13.59 na 20.64 0.2 100 7.0 18 15.0 5.6 14.92 na 21.63 02 100 7.0 19 10.0 5.6 22.39 na 26.5 0.2 100 7.0 20 10.0 5.6 25.82 na 28.46 02 100 7-0 21 10.0 5.6 31.06 na 31.21 0.2 100 70 The maximum velocity is 29.42 and it occurs in the pipe between nodes 9 and TDP Computer Programs by Hydratec Inc. Revision: 50.52.1 Final Calculations - Hazen-Willia r)- 2007 UMI Page 4 MEECO FIRE Date 3-21-19 Hyd. Qa Dia. Fitting Pipe Pt Pt Ref. "C" or Ftng's Pe Pv Notes ****** Point Qt Pf/Ft Eqv. Ln. Total Pf Pn 1 18.19 1.61 0.0 10.000 12.755 K Factor= 5.60 to 120.0 0.0 0.0 0.0 2 18.19 0.0136 0.0 10.000 0.136 Vel= 2.87 2 20.11 1.61 0.0 10.000 12.891 K Factor= 5.60 to 120.0 0.0 0.0 0.0 3 38.3 0.0537 0.0 10.000 0.537 Vel = 6.04 3 20.52 1.61 0.0 10.000 13.428 K Factor= 5.60 to 120.0 0.0 0.0 0.0 4 58.82 0.1189 0.0 10.000 1.189 Vel = 9.27 4 21.41 1.61 2E 8.0 14.960 14.617 K Factor= 5.60 to 120.0 0.0 8.000 2.166 5 80.23 0.2110 0.0 22.960 4.845 Vel = 12.64 5 26.04 1.61 0.0 8.960 21.628 K Factor= 5.60 to 120.0 0.0 0.0 0.0 6 106.27 0.3551 0.0 8.960 3.182 Vel = 16.75 6 27.90 1.61 0.0 8.960 24.810 K Factor= 5.60 to 120.0 0.0 0.0 0.0 7 134.17 0.5464 0.0 8.960 4.896 Vel = 21.14 7 30.52 1.61 T 8.0 2.000 29.706 K Factor= 5.60 to 120.0 0.0 8.000 0.0 8 164.69 0.7984 0.0 10.000 7.984 Vel = 25.95 8 0.0 2.157 0.0 9.750 37.690 to 120.0 0.0 0.0 0.0 9 164.69 0.1922 0.0 9.750 1.874 Vel = 14.46 9 170.39 2.157 2E 12.307 16.380 39.564 to 120.0 0.0 12.307 -4.331 TDP 335.08 0.7150 0.0 28.687 20.512 Vel = 29.42 TDP 0.0 4.26 2E 26.334 151.880 55.745 to 120.0 0.0 26.334 0.0 10 335.08 0.0260 0.0 178.214 4.634 Vel= 7.54 10 0.0 6.357 4E 70.411 66.460 60.379 to 120.0 0.0 70.411 0.0 TOR 335.08 0.0037 0.0 136.871 0.506 Vel = 3.39 TOR 0.0 6.357 Fsp 0.0 20.000 60.885 to 120.0 B 12.573 50.293 8.363 * Fixed Loss= 1 BDR 335.08 0.0037 T 37.72 70.293 0.260 Vel = 3.39 0.0 335.08 69.508 K Factor= 40.19 1 1.81 1.61 T 8.0 2.000 12.755 to 120.0 0.0 8.000 0.0 13 1.81 0.0002 0.0 10.000 0.002 Vel= 0.29 13 0.0 2.157 0.0 9.750 12.757 to 120.0 0.0 0.0 0.0 14 1.81 0.0 0.0 9.750 0.0 Vel = 0.16 14 0.0 1.61 T 8.0 2.000 12.757 to 120.0 0.0 8.000 0.0 15 1.81 0.0002 0.0 10.000 0.002 Vel = 0.29 15 20.00 1.61 0.0 10.000 12.759 K Factor= 5.60 to 120.0 0.0 0.0 0.0 16 21.81 0.0190 0.0 10.000 0.190 Vel= 3.44 Computer Programs by Hydratec Inc. Revision: 50.52.1 Final Calculations - Hazen-Wil. ns UMI Page 5 MEECO FIRE Date 3-21-19 Hyd. Qa Dia. Fitting Pipe Pt Pt Ref. "C'. U1 Flny's Pe Pv """ Notes Point Qt Pf/Ft Eqv. Ln. Total Pf Pn 16 20.15 1.61 0.0 10.000 12.949 K Factor= 5.60 to 120.0 0.0 0.0 0.0 17 41.96 0.0636 0.0 10.000 0.636 Vel= 6.61 17 20.64 1.61 0.0 10.000 13.585 K Factor= 5.60 to 120.0 0.0 0.0 0.0 18 62.6 0.1334 0.0 10.000 1.334 Vel= 9.87 18 21.63 1.61 2E 8.0 14.960 14.919 K Factor= 5.60 to '120.0 0.0 8.000 2.166 19 84.23 0.2310 0.0 22.960 5.303 Vel = 13.27 19 26.50 1.61 0.0 8.960 22.388 K Factor= 5.60 to 120.0 0.0 0.0 0.0 20 110.73 0.3830 0.0 8.960 3.432 Vel = 17.45 20 28.45 1.61 0.0 8.960 25.820 K Factor= 5.60 to 120.0 0.0 0.0 0.0 21 139.18 0.5848 0.0 8.960 5.240 Vel = 21.93 21 31.21 1.61 T 8.0 2.000 31.060 K Factor= 5.60 to 120.0 0.0 8.000 0.0 9 170.39 0.8504 0.0 10.000 8.504 Vel= 26.85 0.0 170.39 39.564 K Factor= 27.09 Computer Programs by Hydratec Inc. Revision: 50.52.1 tqWorldwide Fire Protection Contacts www.tyco-fire.com Products Series TY-FRB — 2.8, 4.2, 5.6, and 8.0 K-Factor Upright, Pendent, and Recessed Pendent Sprinklers Quick Response, Standard Coverage spheres.Although corrosion-resistant General coated sprinklers have passed the Description standard corrosion tests of the appli- cable approval agencies,the testing is _ s% The TYCO Series TY-FRB, 2.8, 4.2, not representative of all possible cor- 5.6, and 8.0 K-factor, Upright, Pen- rosive atmospheres. Consequently, dent, and Recessed Pendent Sprin- it is recommended that the end user klers described in this data sheet are be consulted with respect to the suit- i� quick response, standard coverage, ability of these coatings for any given I i decorative 3 mm lass bulb-type spray corrosive environment.The effects of sprinklers designed for use inplight or ambient temperature,concentration of ordinary hazard,commercial occupan- chemicals, and gas/chemical velocity, cies such as banks, hotels, and shop- should be considered, as a minimum, ping malls. along with the corrosive nature of the chemical to which the sprinklers will be The recessed version of the Series TY- exposed. FRB Pendent Sprinkler,where applica- ble, is intended for use in areas with a An intermediate level of the Series TY- s� finished ceiling.This recessed pendent FRB Pendent Sprinklers is detailed sprinkler uses one of the following: in Technical Data Sheet TFP356, and A Sprinkler Guards are detailed in Tech- • A two-piece Style 10 (1/2 inch NPT) nical Data Sheet TFP780. ! or Style 40(3/4 inch NPT) Recessed Escutcheon with 1/2 inch(12,7 mm)of -- recessed adjustment or up to 3/4 inch - (19,1 mm)of total adjustment from the The Series TY-FRB, 2.8, 4.2, 5.6, \ flush pendent position,or a and 8.0 K-factor, Upright, Pendent, and Recessed Pendent Sprinklers • A two-piece Style 20 (1/2 inch NPT) described herein must be installed or Style 30(3/4 inch NPT)Recessed and maintained in compliance with Sprinkler Escutcheon with 1/4 inch(6,4 mm)of this document and with the applica- p recessed adjustment or up to 1/2 inch ble standards of the National Fire Pro- Identification (12,7 mm)of total adjustment from the tection Association, in addition to the flush pendent position. standards of any authorities having Number (SIN) The adjustment provided by the jurisdiction. Failure to do so may impair Recessed Escutcheon reduces the the performance of these devices. TY1131: Upright 2.81K,1/2-NPT accuracy to which the fixed pipe drops The owner is responsible for maintain- TY1231: Pendent 2.81K,1/2-NPT to the sprinklers must be cut. ing their fire protection system and TY2131: Upright 4.2K,1/2-NPT Corrosion-resistant coatings, where devices in proper operating condition. TY2231: Pendent 4.21K,1/2-NPT applicable, are utilized to extend the The in ding Upright 5.61K,1/2-NPT life of copper alloy sprinklers beyond manuf c F�jir rlq�b n t t T�+� endent 5.6K,1/2-NPT that which would otherwise be obtained any q s't vim' 1V l T7 12 pright 8.0K,3/4""NPT when exposed to corrosive atmo- BUILDING DEPARTMEW231: endent 8.0K,3/4""NPT APPROVED TY4931: Pendent 8.01K, 1/2-NPT IMPORTANT DATE BY �� Always refer to Technical Data Sheet TFP700 for the "INSTALLER NO CHANCES AUTHORIZED WARNING"that provides cautions with respect to handling and instal- UNLESS APPROVED BY THE lation of sprinkler systems and com- BUILDING INSPECTOR ponents. Improper handling and installation can permanently dam- age a sprinkler system or its compo- Received nents and cause the sprinkler to fail to operate in a fire situation or cause OFFICE COPY it to operate prematurely. MAY 15 2019 Page 1 of 10 OCTOBER 2013 $ T P171�Z _ 1 i I :n !?MAH:)04 TFP171 Page 2 of 10 *Temperature rating ** Pipe thread connections per 1 - Frame 3 - Sealing 5 - Compression is indicated on ISO 7-1 can be provided on ESCUTCHEON 2 - Button Assembly Screw Deflector. special request. PLATE SEATING 4 - Bulb 6 - Deflector* SURFACE 7 - Bushing 7 1 7/16" (11,1 mm) 3 NOMINAL MAKE-IN 2-1/4" 2 (57,2 mm) 2-3/16" 4 (55,6 mm) 1-9/16" - (39,7 mm) 5 —6* 1/2"NPT** WRENCH STYLE 10 or 20 Imo _ 2-7/8"(73,0 mm)DIA. - FLATS RECESSED UPRIGHT PENDENT ESCUTCHEON RECESSED PENDENT CROSS SECTION FIGURE 1 QUICK RESPONSE SERIES TY-FRB UPRIGHT(TY1131)AND PENDENT(TY1231)SPRINKLERS 2.8 K-FACTOR, 112 INCH NPT *Temperature rating ** Pipe thread connections per 1 - Frame 3 - Sealing 5 - Compression is indicated on ISO 7-1 can be provided on ESCUTCHEON 2 - Button Assembly Screw Deflector. special request. PLATE SEATING 4 - Bulb 6 - Deflector* SURFACE 1 7/16" 3 (11,1 mm) 2 NOMINAL 2-3/16" MAKE-IN (55,6 mm) 2-3/16" 1-1/2" 4 (55,6 mm) i (38,1 mm) 5 6* 1/2"" NPT** WRENCH STYLE 10 or 20 (-- 2-7/8"(73,0 mm)DIA. FLATS RECESSED UPRIGHT PENDENT ESCUTCHEON RECESSED PENDENT CROSS SECTION FIGURE 2 QUICK RESPONSE SERIES TY-FRB UPRIGHT(TY2131)AND PENDENT(TY2231)SPRINKLERS 4.2 K-FACTOR, 112 INCH NPT TFP171 Page 3 of 10 *Temperature rating ** Pipe thread connections per 1 - Frame 3 - Sealing 5 - Compression is indicated on ISO 7-1 can be provided on 2 - Button Assembly Screw Deflector. special request. ESCUTCHEON PLATE SEATING 4 - Bulb 6 - Deflector* SURFACE 1 7/16" 3 (11,1 mm)NOMIN ' MAKE-IN 3/16" 2 6 mm) 4 2-3/16" JTI_ 1-1/2"(55,6 mm) (31 mm) 1/2" NPT** I WRENCH STYLE 10 or 20 12-7/8"(73,0 mm)DIA. - FLATS RECESSED UPRIGHT PENDENT ESCUTCHEON RECESSED PENDENT CROSS SECTION FIGURE 3 QUICK RESPONSE SERIES TY-FRB UPRIGHT(TY3131)AND PENDENT(TY3231)SPRINKLERS 5.6 K-FACTOR, 112 INCH NPT *Temperature rating ** Pipe thread connections per 1 - Frame 3 - Sealing 5 - Compression is indicated on ISO 7-1 can be provided on ESCUTCHEON 2 - Button Assembly Screw Deflector. special request. PLATE SEATING 4 - Bulb 6 - Deflector* SURFACE 1 112" 3 (12,7 mm) Y6* NOMINAL 2-5/16" 2 MAKE-IN (58,7 mm) 1-9/16" 2-1/4" I 4 (57,2 mm) (39,7Imm) 1 5 3/4"NPT** WRENCH STYLE 30 or 40 I4_2-7/8" (73,0 mm)DIA. FLATS RECESSED UPRIGHT PENDENT ESCUTCHEON RECESSED PENDENT CROSS SECTION FIGURE 4 QUICK RESPONSE SERIES TY-FRB UPRIGHT(TY4131)AND PENDENT(TY4231)SPRINKLERS 8.0 K-FACTOR,3141NCH NPT TFP171 Page 4 of 10 CEILING PLATE 1 - Frame 5 - Compression SEATING SURFACE 2 - Button Screw 1 3 -Sealing 6 - Deflector Assembly 3 4 - Bulb 7/16" 2-1/4" (11,1 mm) (57,2 mm) 2 NOMINAL } MAKE-IN I * Temperature rating is 2-3/16„ 1-9/16„ 4 indicated on Deflector. (55,6 mm) � (39,7 mm) 5 ** Pipe thread connections \ per ISO 7-1 can be 6 * provided on special 1/2" NPT** WRENCH request. FLATS UPRIGHT PENDENT CROSS SECTION FIGURE 5 QUICK RESPONSE SERIES TY-FRB UPRIGHT(TY4831)AND PENDENT(TY4931)SPRINKLERS 8.0 K-FACTOR, 112 INCH NPT Technical Design torque can distort the sprinkler Inlet with consequent leakage or impairment Data Criteria of the sprinkler. Do not attempt to compensate for Approvals The TYCO Series TY-FRB, 2.8, 4.2, insufficient adjustment in the Escutch- UL and C-UL Listed 5.6, and 8.0 K-factor, Upright, Pen- eon Plate by under-or over-tightening FM, LPCB, and NYC Approved dent,and Recessed Pendent Sprinklers the sprinkler. Re-adjust the position of Refer to Table A and B for complete are intended for fire protection sys- the sprinkler fitting to suit. approval information including tems designed in accordance with the corrosion-resistant status. standard installation rules recognized Series TY-FRB Upright and Pendent by the applicable Listing or Approval Sprinklers Maximum Working Pressure agency (such as, UL Listing is based The Series TY-FRB Pendent and Refer to Table C. on the requirements of NFPA 13, and Upright Sprinklers must be installed FM Approval is based on the require- in accordance with the following Discharge Coefficient ments of FM's Loss Prevention Data instructions. K=2.8 GPM/psi1/2 (40,3 LPM/bars/2) Sheets). Only the Style 10, 20, 30, or Step 1.Install Pendent sprinklers in the K=4.2 GPM/psi1/2 (60,5 LPM/bars/2) 40 Recessed Escutcheon, as applica- pendent position. Install upright sprin- K=5.6 GPM/psi1/2 (80,6 LPM/barti2) ble, is to be used for recessed pendent klers in the upright position. K=8.0 GPM/psi1/2 (115,2 LPM/bars/2) installations. Step 2. With pipe-thread sealant Temperature Rating Installation applied to the pipe threads, hand- Refer to Table A and B. tighten the sprinkler into the sprinkler The TYCO Series TY-FRB, 2.8, 4.2, fitting. Finishes 5.6,and 8.0 K-factor,Upright, Pendent, Sprinkler: Refer to Table D. Recessed and Recessed Pendent Sprinklersmust Step 3.Tighten the sprinkler into the Escutcheon:White Coated, Chrome be installed in accordance with this sprinkler fitting using only the W-Type 6 Plated,or Brass Plated. section. Sprinkler Wrench(Figure 14).With refer- ence to Figures 1 through 5,apply the Physical Characteristics General Instructions W-Type 6 Sprinkler Wrench to the sprin- Frame. . . . . . . . . . . . . . . . . . . Bronze Do not install any bulb-type sprinkler if kler wrench flats. Button. . . . . . . . . . . . . .Brass/Copper the bulb is cracked or there is a loss Sealing Assembly. . . . . . . . .Beryllium of liquid from the bulb.With the sprin- Series TY-FRB Recessed Pendent Nickel w/TEFLON kler held horizontally, a small air bub- Sprinklers Bulb . . . . . . . . . Glass ble should be present. The diameter The Series TY-FRB Recessed Pendent Compression Screw. . . . . . . . Bronze of the air bubble is approximately 1/16 Sprinklers must be installed in accor- Deflector. . . . . . . . . . .Copper/Bronze inch (1,6 mm)for the 135°F(57°C)and dance with the following instructions. Bushing(K=2.8) . . . . . . . . . . . Bronze 3/32 inch(2,4 mm)for the 286°F(141°C) Step A.After installing the Style 10,20, Operation temperature ratings. 30, or 40 Mounting Plate, as applica- ~ A leak-tight 1/2 inch NPT sprinkler joint ble,over the sprinkler threads and with The glass bulb contains a fluid that shold be obtained by applying a min- pipe-thread sealant applied to the pipe expands when exposed to heat.When imum to maximum torque of 7 to 14 threads, hand-tighten the sprinkler into the rated temperature is reached, the ft.-Ibs. (9,5 to 19,0 Nm). A leak tight the sprinkler fitting. fluid expands sufficiently to shatter the 3/4 inch NPT sprinkler joint should be Step B.Tighten the sprinkler into the glass bulb, allowing the sprinkler to obtained with a torque of 10 to 20 ft, sprinkler fitting using only the W-Type activate and water to flow. lbs. (13,4 to 26,8 Nm). Higher levels of 7 Recessed Sprinkler Wrench (Figure TFP171 Page 5of10 SPRINKLER FINISH(See Note 5) K BULB LIQUID NATURAL CHROME SIGNAL*** FACTOR TYPE TEMPERATURE COLOR BRASS PLATED WHITE 135°F(57°C) Orange PENDENT 155°F(68°C) Red (TY1231) and 175°F(79°C) Yellow 1,2,3,4 UPRIGHT (TY1131) 200°F(93°C) Green 286°F(141°C) Blue 135°F(57°C) Orange 2.8 RECESSED 1 1/2"NPT PENDENT 55°F(68°C) Red (TY1231)* 175°F(79°C) Yellow Figure 6 200°F(93°C) Green � 1,2,4 135°F(57°C) Orange RECESSED °°155F(68C Red PENDENT ) (TY1231)** 175°F(79°C) Yellow Figure 7 200°F(93°C) Green 135°F(57°C) Orange PENDENT 155°F(68°C) Red (TY2231) and 175°F(79°C) Yellow UPRIGHT °°200F 93C Green (TY2131) ( ) 286°F(141°C) Blue 135°F(57°C) Orange 4.2 RECESSED 155F 68C 1/2"NPT PENDENT ° ° ( ) Red 1,2 (TY2231)* 175°F(79°C) Yellow Figure 8 200°F(93°C) Green 135°F(57°C) Orange RECESSED °°155F 68C Red PENDENT ( ) (TY2231)** 175°F(79°C) Yellow Figure 9 200°F(93°C) Green NOTES: 1. Listed by Underwriters Laboratories,Inc.,(UL)as Quick Response Sprinklers. 2. Listed by Underwriters Laboratories,Inc.,for use in Canada(C-UL)as Quick Response Sprinklers. 3. Approved by Factory Mutual Research Corporation(FM)as Quick Response Sprinklers. 4. Approved by the City of New York under MEA 354-01-E. 5. Where Polyester Coated Sprinklers are noted to be UL and C-UL Listed,the sprinklers are UL and C-UL Listed as Corrosion-Resistant Sprinklers. *Installed with Style 10(1/2"NPT)or Style 40(3/4"NPT)3/4"Total Adjustment Recessed Escutcheon,as applicable. `*Installed with Style 20(1/2"NPT)or Style 30(3/4"NPT)1/2"Total Adjustment Recessed Escutcheon,as applicable. Frame and Deflector only.Listings and approvals apply to color(Special Order). N/A:Not Available TABLE A LABORATORY LISTINGS AND APPROVALS FOR 2.8 AND 4.2 K-FACTOR SPRINKLERS 15). With reference to Figures 1 to 4, apply the W-Type 7 Recessed Sprinkler Wrench to the sprinkler wrench flats. Step C. After ceiling installation and finishing, slide on the Style 10,20,30, or 40 Closure over the Series TY-FRB Sprinkler and push the Closure over the Mounting Plate until its flange comes in contact with the ceiling. I TFP171 Page 6 of 10 SPRINKLER FINISH(See Note 8) K TYPE TEMPERATURE BULB LIQUID NATURAL CHROME SIGNAL.. LEAD FACTOR COLOR BRASS PLATED WHITE COATED 135°F(57°C) Orange PENDENT(TY3231) 155°F(68°C) Red and 175°F(79°C) Yellow 1,2,3,4,5,6,7 1,2,3,5 UPRIGHT 200°F(93°C) Green (TY3131) 286°F(141°C) Blue 135°F(57°C) Orange RECESSED 155°F(68°C) Red 5.6 PENDENT 175°F(79°C) Yellow 1,2,4,5 N/A 1/2'NPT (TY3231) Figure 10 200°F(93°C) Green 286°F(141°C) Blue 135°F(57°C) Orange RECESSED 155°F(68°C) Red PENDENT 175°F(79°C) Yellow 1,2,3,4,5 N/A (TY3231) Figure 11 200°F(93°C) Green 286°F(141°C) Blue 135-F(57°C) Orange PENDENT(TY4231) 155°F(68°C) Red and 175°F(79°C) Yellow 1,2,3,4,5,6,7 1,2, 5 UPRIGHT 200°F(93°C) Green (TY4131) 286°F(141°C) Blue 135°F(57°C) Orange RECESSED 155°F(68°C) Red 8.0 PENDENT 175°F(79°C) Yellow 1,2,5 N/A 3/4 NPT (TY4231) Figure 12 200°F(93°C) Green 286°F(141°C) Blue 135°F(57°C) Orange RECESSED 155°F(68°C) Red PENDENT 175°F(79°C) Yellow 1,2,3,5 N/A (TY4231) Figure 13 200°F(93°C) Green 286°F(141°C) Blue 135°F(57°C) Orange PENDENT 155°F(68°C) Red 1/28 (TY4931) NPT and 175°F(79°C Yellow 1,2,4,5,6 UPRIGHT 200°F(93°C) Green (TY4831) 286°F(141°C) Blue NOTES: 1. Listed by Underwriters Laboratories,Inc.,(UL)as Quick Response Sprinklers. 2. Listed by Underwriters Laboratories,Inc.,for use in Canada(C-UL)as Quick Response Sprinklers. 3. Approved by Factory Mutual Research Corporation(FM)as Quick Response Sprinklers. 4. Approved by the Loss Prevention Certification Board(LPCB Ref.No.007k/04)as Quick Response Sprinklers.However,LPCB does not rate the thermal sensitivity of recessed Sprinklers. 5. Approved by the City of New York under MEA 354-01-E. 6. VdS Approved(For details,contact Tyco Fire Suppression&Building Products,Enschede,Netherlands,Tel.31-53-428-4444/Fax 31-53-428-3377.) 7. Approved by the Loss Prevention Certification Board(LPCB Ref.No.094a/06)as Quick Response Sprinklers. 8. Where Polyester Coated and Lead-Coaled Sprinklers are noted to be UL and C-UL Usled,the sprinklers are UL and C-UL Listed as Corrosion-Resistant Sprinklers.Where Lead-Coated Sprinklers are noted to be FM Approved,the sprinklers are FM Approved as a Corrosion-Resistant Sprinklers. "Installed with Style 10(1/2"NPT)or Style 40(3/4"NPT)3/4"Total Adjustment Recessed Escutcheon,as applicable. Installed with Style 20(1/2"NPT)or Style 30(3/4"NPT)1/2"Total Adjustment Recessed Escutcheon,as applicable. Frame and Deflector only. Listings and approvals apply to color(Special Order). N/A:Not Available TABLE B LABORATORY LISTINGS AND APPROVALS FOR 5.6 AND 8.0 K-FACTOR SPRINKLERS TFP171 Page 7 of 10 SPRINKLER FINISH K TYPE NATURAL CHROME SIGNAL LEAD FACTOR BRASS PLATED WHITE COATED PENDENT(TY1231) and 2.8 UPRIGHT(TY1131) 175 PSI(12,1 BAR) N/A 1/2"NPT RECESSED PENDENT(TY1231) PENDENT(TY2231) and 4.2 UPRIGHT(TY2131) 175 PSI(12,1 BAR) N/A 1/2"NPT RECESSED PENDENT(TY2231) PENDENT(TY3231) 175 PSI and 5.6 UPRIGHT(TY3131) 250 PSI(17,2 BAR) (12,1 BAR) 1/2"NPT OR 175 PSI(12,1 BAR) RECESSED (SEE NOTE 1) N/A PENDENT(TY3231) PENDENT(TY4231) 175 PSI and UPRIGHT(TY4131) (12,1 BAR) 8'� 175 PSI(12,1 BAR) 3/4"NPT RECESSED N/A PENDENT(TY4231) PENDENT(TY4931) 1/28 NPT 17 PSI and 175 PSI(12,1 BAR) (12,5 BAR) UPRIGHT(TY4831) NOTES: 1. The maximum working pressure of 250 psi(17,2 bar)only applies to the Listing by Underwriters Laboratories Inc.(UL);the Listing by Underwriters Laboratories,Inc.for use in Canada(C-UL);and,the Approval by the City of New York. TABLE C MAXIMUM WORKING PRESSURE corrosive products of combustion, but tion Service in accordance with local Care and have not operated,should be replaced requirements and/or national codes. if they cannot be completely cleaned Maintenance by wiping the sprinkler with a cloth or Care must be exercised to avoid dam- The TYCO Series TY-FRB must be by brushing it with a soft bristle brush. age to the sprinklers -before, during, and after installation. Sprinklers dam- maintained and serviced in accordance Care must be exercised to avoid dam- aged by dropping, striking, wrench with this section. age to the sprinklers- before, during, twist/slippage, or the like, must be Before closing a fire protection system and after installation. Sprinklers dam- replaced. Also, replace any sprinkler main control valve for maintenance aged by dropping, striking, wrench that has a cracked bulb or that has lost work on the fire protection system twist/slippage, or the like, must be liquid from its bulb. (Ref. Installation that it controls, obtain permission to replaced. Also, replace any sprinkler Section). shut down the affected fire protection that has a cracked bulb or that has lost systems from the proper authorities liquid from its bulb. (Ref. Installation Initial and frequent visual inspections of and notify all personnel who may be Section.) random samples are recommended for affected by this action. The owner is responsible for the corrosion resistant sprinklers to verify p the integrity of the corrosion-resistant Absence of the outer piece of an inspection,testing,and maintenance of material of construction. Thereafter, escutcheon, which is used to cover their fire protection system and devices annual inspections per NFPA 25 should a clearance hole, can delay sprinkler in compliance with this document, as suffice. operation in afire situation. well as with the applicable standards of the National Fire Protection Associa- Inspections of corrosion-resistant Sprinklers which are found to be leak- tion (e.g., NFPA 25), in addition to the sprinklers are recommended at close ing or exhibiting visible signs of corro- standards of any other authorities hav- range, instead of from the floor level sion must be replaced. ing jurisdiction. Contact the installing per NFPA. Inspection at close range Automatic sprinklers must never be contractor or sprinkler manufacturer can better determine the exact sprin- painted, plated, coated, or other- regarding any questions. kler condition and the long-term integ- rity of the corrosion-resistant material, wise altered after leaving the factory. Automatic sprinkler systems are rec- which can be affected by the corrosive Modified sprinklers must be replaced. ommended to be inspected, tested, conditions present. Sprinklers that have been exposed to and maintained by a qualified Inspec- TFP171 Page 8 of 10 2-7/8" DIA. 2-7/8" DIA. 5/8±1/4" (73,0 mm) 3/4"(19,1 mm) 1/2±1/8" �— (73,0 mm) 1/2"(12,7 mm) (15,9i6.4 mm) 2-1/4" DIA. 1/4"(6,4 mm) (1217±3,2 mm) 2-1/4" DIA. 1/4"(6,4 mm) FACE OF (57,2 mm) MOUNTING MOUNTING FACE OF (57,2 mm) ~I SPRINKLER Irl PLATE SPRINKLER PLATE FITTING FITTING im ril 1/8" r 1/8" (3,2 mm) (3,2 mm) /M MOUNTING MOUNTING SURFACE 1 SURFACE y CLOSURE SERIES 1-5/16"(33,3 mm) CLOSURE SERIES 1-5/16"(33,3 mm), TY-FRB 13/16"(20,6 mm) TY-FRB 1-1/16"(27,0 mm) FIGURE 6 FIGURE 7 SERIES TY-FRB RECESSED PENDENT SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 3141NCH TOTAL ADJUSTMENT WITH TWO-PIECE 112 INCH TOTAL ADJUSTMENT STYLE 10 RECESSED ESCUTCHEON STYLE 20 RECESSED ESCUTCHEON 2.8 K-FACTOR, 112 INCH NPT 2.8 K-FACTOR, 112 INCH NPT _ 2-7/8" DIA. _ 2-7/8" DIA. 5/8±1/4" (73,0 mm) 3/4"(19,1 mm) (73,0 mm) 1/2" 12,7 mm (15,9±6,4 mm) 2-1/4" DIA. 1/4"(6,4 mm) (12,7±3,2 mm) 2-1/4" DIA. 1/4"(6,4 mm) FACE OF (57,2 mm) ~I FACE OF (57,2 MOUNTING ) I MOUNTING SPRINKLER PLATE SPRINKLER PLATE FITTING FITTING 1/8', 1/8" (3,2 mm) _- (3,2 mm) � MOUNTING MOUNTING II SURFACE SURFACE 1 i CLOSURE SERIES 1-1/4"(31,8 mm) CLOSURE SERIES 1-1/4" (31,8 mm) TY-FRB 3/4"(19,1 mm) TY-FRB 1"(25,4 mm) FIGURE 8 FIGURE 9 SERIES TY-FRB RECESSED PENDENT SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 314 INCH TOTAL ADJUSTMENT WITH TWO-PIECE 112 INCH TOTAL ADJUSTMENT STYLE 10 RECESSED ESCUTCHEON STYLE 20 RECESSED ESCUTCHEON 4.2 K-FACTOR, 112 INCH NPT 4.2 K-FACTOR, 112 INCH NPT TFP171 Page 9 of 10 2-7/8" DIA. _ 2-7/8" DIA. 5/8t1/4" (73,0 mm) 3/4"(19,1 mm) (73,0 mm) 1/2" 12,7 mm 1/2t1/B" ( ) (15,9t6,4 mm) 1/4"(6,4 mm) (12,7t3,2 mm) 6,4 mm 2-1/4" DIA. 2-1/4" DIA. 1/4"( ) FACE OF (57,2 mm) MOUNTING FACE OF (57,2 mm) MOUNTING SPRINKLER PLATE SPRINKLER PLATE FITTING FITTING 1/8" L1 (3,22 /8" (3,2 mm) mm) I - MOUNTING MOUNTING SURFACE SURFACE CLOSURE SERIES 1-1/4"(31,8 mm) CLOSURE SERIES 1-1/4" (31,8 mm) TY-FRB 3/4" (19,1 mm) TY-FRB 1"(25,4 mm) FIGURE 10 FIGURE 11 SERIES TY-FRB RECESSED PENDENT SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 314 INCH TOTAL ADJUSTMENT WITH TWO-PIECE 1121NCH TOTAL ADJUSTMENT STYLE 10 RECESSED ESCUTCHEON STYLE 20 RECESSED ESCUTCHEON 5.6 K-FACTOR, 1121NCH NPT 5.6 K-FACTOR, 1121NCH NPT 2-7/8" DIA. 2-7/8" DIA. 5/8t1/4" (73,0 mm) 3/4" (19,1 mm) 1/2t1/8" (73,0 mm) 1/2"(12,7 mm) (15,9t6,4 mm) 2-1/4" DIA. 1/4"(6,4 mm) (12,7t3,2 mm) 2-1/4" DIA. 1/4"(6,4 mm) FACE OF ( ,2 mm) MOUNTING FACE OF (57,2 mm) MOUNTING SPRINKLER PLATE SPRINKLER PLATE 57 FITTING FITTING (3,2 mm) t I (3,2 mm) f j VTl ri MOUNTING MOUNTING SURFACE SURFACE CLOSURE SERIES 1-5/16"(33,3 mm)I CLOSURE SERIES 1-5/16"(33,3 mm TY-FRB 13/16"(20,6 mm) TY-FRB 1-1/16"(27,0 mm) FIGURE 12 FIGURE 13 SERIES TY-FRB RECESSED PENDENT SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 314 INCH TOTAL ADJUSTMENT WITH TWO-PIECE 112 INCH TOTAL ADJUSTMENT STYLE 40 RECESSED ESCUTCHEON STYLE 30 RECESSED ESCUTCHEON 8.0 K-FACTOR,314 INCH NPT 8.0 K-FACTOR,314 INCH NPT WRENCH RECESS WRENCH RECESS (END"A"USED FOR 1/2"NPT MODELS) WRENCH RECESS 'END"B"USED FOR 3/4"NPT MODELS) PUSH WRENCH IN TO ENSURE ENGAGEMENT WITH SPRINKLER WRENCHING AREA FIGURE 14 FIGURE 15 W-TYPE 6 SPRINKLER W-TYPE 7 RECESSED WRENCH SPRINKLER WRENCH TFP171 Page 10 of 10 P/N 57 - XXX - X - XXX SIN SPRINKLER TEMPERATURE FINISH RATINGS 330 2.8K UPRIGHT(1/2"NPT) TY1131 1 NATURAL BRASS 135 135°F(57°C) 331 2.8K PENDENT(1/2"NPT) TY1231 3 PURE WHITE 68°°155F C (RAL9010)* 155 ( ) 340 4.2K UPRIGHT(1/2"NPT) TY2131 4 SIGNAL WHITE °°175 175F 79C (RAL9003) ( ) 341 4.2K PENDENT(1/2"NPT) TY2231 5 JET BLACK °°200 200F 93C (RAL9005)** ( ) 370 5.61K UPRIGHT(1/2"NPT) TY3131 7 LEAD COATED 286 286°F(141°C) 371 5.6K PENDENT(1/2"NPT) TY3231 9 CHROME PLATED 390 8.0K UPRIGHT(3/4"NPT) TY4131 Eastern Hemisphere sales only. **Available in only 2.8K,4.2K,and 391 8.0K PENDENT(3/4"NPT) TY4231 8.0K,155°F(68°C)and 200°F(93°C); requires lead time to manufacture. 360 8.OK UPRIGHT(1/2"NPT) TY4831* r361 r8.OK PENDENT(1/2"NPT) TY4931* TABLE D SERIES TY-FRB PENDENT AND UPRIGHT SPRINKLERS PART NUMBER SELECTION Ordering Procedure Contact your local distributor for availability. When placing an order, indicate the full product name and Part Number(P/N). Sprinkler Assemblies with NPT Thread Connections Specify: Series TY-FRB (Specify SIN), (specify K-factor), (specify Pendent or Upright) Sprinkler (specify) tempera- ture rating, (specify) finish or coating, P/N (specify from Table D) Recessed Escutcheon: Specify: Style (10, 20, 30, or 40) Recessed Escutcheon with (specify*) finish, P/N(specify*) Sprinkler Wrench Specify: W Type 6 Sprinkler Wrench, P/N 56-000-6-387 Specify: W-Type 7 Sprinkler Wrench, P/N 56-850-4-001 *Refer to Technical Data Sheet TFP770 GLOBAL HEADQUARTERS 11400 Pennbrook Parkway,Lansdale,PA 19446 Telephone+1-215-362-0700 Copyright©2013 Tyco Fire Products,LP. All rights reserved. t"CO TEFLON is trademark of The DuPont Corporation. rite Protection Products NOTICE TO PERMITEE AND/OR OWNER ❑ PARTIAL APPROVAL ❑ CORRECTIONS REQUIRED Cl DO NOT OCCUPY PkAPPROVED PERMIT#:6 LOT#: DATE: JOB ADDRESS:j 6 �" At Al TYPE OF INSPECTION: ❑ NO PERMIT-STOP WORK-OBTAIN PERMIT:AND MAKE WORK COMPLY WITH CURRENT BUILDING AND/OR PLANNING CODES. ❑ CONSTRUCTION IS NOT IN ACCORDANCE WITH APPROVED PLANS AND PERMIT -STOP WORK:MAKE EXISTING WORK COMPLY WITH APPROVED PLAN AND PERMIT OR REMOVE IT. Cl STOP WORK UNTIL AUTHORIZED TO CONTINUE BY INSPECTOR. Cl CORRECTIONS LISTED BELOW MUST BE MADE BEFORE WORK CAN BE APPROVED. ❑ WORK NOT READY FOR INSPECTION:$50 REINSPECTION FEE(PER IBC) MUST BE PAID PRIOR TO NEXT INSPECTION. ❑ CONTACT INSPECTOR 360-403-3551 ❑ IICALL FOR REINSPECTION THEACTIONS OR CORRECTIONS INDICATED ABOVE ARE REQUIRED WITHIN DAYS OR PENALTIES IMPOSED BYLAW MAYAPPLY. FOR INSPECTION CALL: 360-403-3417 INSPECTOR DATE M BUILDING DEPT. Cl PLANNING DEPT. CITY OF ARLINGTON ` .,,; ' *_ 00 FIRE SPRINKLER PERMIT APPLICATION 7 Department of Community &Economic Development City of Arlington• 18204 59th Ave NE• Arlington,WA 98223• Phone(360) 403-3551 THIS APPLICATION MUST BE ACCOMPANIED BY TWO (2) SETS OF COMPLETE AND SCALED PLANS, TWO(2) SETS OF HYDRAULIC CALCULATIONS, TWO (2) SETS OF EQUIPMENT SPECIFICATIONS FOR EACH FIRE SPRINKLER PERMIT APPLICATION. INCLUDE ELECTRICAL PLANS WHERE APPLICABLE. ALSO INCLUDE SPECIFICATION SHEETS, WIRING DIAGRAMS (POINT TO POINT WIRING), AND ALL OTHER INFORMATION ON ALL EQUIPMENT TO BE INSTALLED PRIOR TO INSTALLATION. Type of Permit: ❑ New Fire Sprinkler ❑✓ Fire Sprinkler Add/Alt ❑ Underground Fire Line 19704 60th Ave NE Project Address: Parcel ID#: Project Valuation: 4,050.00 Number of Heads: 19 Building Area(Sq Ft): Owner: Meeco Phone Number: Address: City: State: Zip Code: Contact Person: Phone Number: S --J 3 A c Cell Phone: Email-,._ )ht FI[!A(CJ LA 0.-C) C C 1 1( c o: Address: City: State: Zip Code: Contractor: Unlimited Mechanical, Inc. Phone Number: 425-583-4775 Address PO Box 1457 City:Marysville State: WA Zip Code:98270 Contractor's License Number: UMLIMM1093M6 Expiration:05/13/2020 Contact Person: Shelley Johnosn Email:shelley@umifireprotection.com I hereby certify that the above information is correct and that the construction on, and the occupancy and the use of the above- described property will be in accordance with the laws,rules and regulation of the State of Washington. Applican ig ure Date Print Appli ants Name Received FOR STAFF USE ONLY j LC) 6 Ln LA - Permit# Aocep y Amount Received Receipt# Date Received WEB Forms-131 Page 1 of 1 6/16LP - ' � CITY OF ARLINGTON 238 N. OLYMPIC AVE -ARLINGTON, WA. 98223 �\ PHONE; (360)403-3551 BUILDING PERMIT Address:19704 60th Ave NE Permit#:2562 Parcel#:00746300001100 Valuation:4050.00 OWNER APPLICANT CONTRACTOR Name: 19704 Properties LLC Name:Unlimited Mechanical,Inc. Name:UNLIMITED MECHANICAL INC Address:7722 21 st Ave NE Address:PO Box 1457 Address: 19221 63rd Avenue NE#2 City,State Zip:Seattle,WA 98115 City,State Zip:Marysville,WA 98270 City,State Zip:Arlington,WA 98223 Phone: Phone:425-583-4775 Phone:425-583-4775 LIC: EXP: MECHANICAL CONTRACTOR PLUMBING CONTRACTOR Name:Unlimited Mechanical,Inc Name: Address: 19221 63rd Ave NE#2 Address: City,State,Zip:Arlington,WA 98223 City,State,Zip: Phone:425-583-4775 Phone: LIC#:UNLIMMI093M6 EXP: 5/13/2020 LIC#: EXP: JOB DESCRIPTION PERMIT TYPE: Fire Sprinkler CODE YEAR: 2015 STORIES: CONST.TYPE: DWELLING UNITS: OCC GROUP: BUILDINGS: OCC LOAD: PERMIT APPROVAL I AGREE TO COMPLY WITH CITY AND STATE LAWS REGULATING CONSTRUCTION AND IN DOING THE WORK AUTHORIZED THEREBY; NO PERSON WILL BE EMPLOYED IN VIOLATION OF THE LABOR CODE OF THE STATE OF WASHINGTON RELATING TO WORKMEN'S COMPENSATION INSURANCE AND RCW 18.27. THIS APPLICATION IS NOT A PERMIT UNTIL SIGNED BY THE BUILDING OFFICIAL OR HIS/HER DEPUTY AND ALL FEES ARE PAID. IT IS UNLAWFUL TO USE OR OCCUPY A BUILDING OR STRUCTURE UNTIL A FINAL INSPECTION HAS BEEN MADE AND APPROVAL OR A CERTIFICATE OF OCCUPANCY HAS BEEN GRANTED. IBC110/IRC110. SAL T NOTICE:Sales tax relating to construction and construction materials in the City of Arlington must be reported on your sales tax return form and co C' of Arlington 0 o Signature Print Name Date Released By I D to CONDITIONS Permit and set of approved plans to remain on site during installation. 2.Significant deviations from approved plans made during installation shall be required to be resubmitted for review prior to inspections: may include hangers, earthquake bracing, sprinkler locations and pipe re-routing that could impact hydraulic calculations. Failure to submit revisions could result in cancellation of an inspection while a review of an as-built resubmittal is conducted. 3. Hangers and earthquake bracing shall be installed in accordance with NFPA 13. 4. Sway bracing required on 2 inch cross mains in Knit/Powder rooms. 5. Hydrostatic test required: System pressure for 2 hours minimum 6. Sprinkler system Contractors Material and Test Certificate shall be submitted prior to close out of permit. 7. Owner shall be provided with a set of approved plans and associated documents for their files. 8. Call at least 48 hours in advance to schedule inspections. THIS PERMIT AUTHORIZS ONLY THE WORK NOTED.THIS PERMIT COVERS WORK TO BE DONE ON PRIVATE PROPERTY ONLY. ANY CONSTRUCTION ON THE PUBLIC DOMAIN(CURBS,SIDEWALKS,DRIVEWAYS,MARQUEES,ETC.)WILL REQUIRE SEPARATE PERMISSION. PERMIT FEES Date Description Fee Amount 5/30/2019 Credit Card Surcharge $8.63 5/30/2019 Fire Review Fee $100.00 5/30/2019 Fire Sprinkler Fee $162.56 5/30/2019 Processing/Technology Fee $25.00 Total Due: $296.19 Total Payment: $296.19 FORM 2-J O Automatic Sprinkler Systems Contractor's Material and Test Certificate for Aboveground Piping Date: 06/11/19 property Name: Meeco Property Address: 19704 60th Ave NE-Arlington,WA. 98223 Procedure Upon completion of work, inspection and tests shall be made by the contractor's representative and witnessed by an owner's representative. All defects shall be corrected and the system left in service before contractor's personnel finally leave the job. A certificate shall be filled out and signed by both representatives. Copies shall be prepared for approving authori- ties, owners, and contractors. It is understood that the owner's representative's signature in no way prejudices any claim against contractor for faulty material, poor workmanship, or failure to comply with approving authority's requirements or local ordinances. Plans Accepted by[approving authority's name(s)] City of Arlington Address 238 N Olympic Ave-Arlington, WA. 988223 Installation conforms to accepted plans? El Yes ❑ No Equipment used is approved? 0 Yes ❑ No If no, explain deviations. Instructions Has person in charge of fire equipment been instructed as to location of control valves and care and maintenance of this new equipment? 0 Yes ❑ No If no, explain. Have copies of appropriate instructions and care and maintenance charts and NFPA 13 been left on premises? 0 Yes ❑ No If no, explain. Location of System Supplies building(s) Sprinklers Year of Orifice Temperature Make Model Manufacture Size Quantity Rating Tvco: TY3131 TY-FRB QR Uariaht 1/2 14 175 Tvco: TY3231 1/2 5 155" Pipe and Fittings Pipe conforms to NFPA 13 standard. 0 Yes ❑ No Fittings conform to NFPA 13 standard. 0 Yes ❑ No If no, explain. PAGE 1 of 3 Copyright©2000 National Fire Protection Association FORM 2-J O Automatic Sprinkler Systems Contractor's Material and Test Certificate for Aboveground Piping (coast.) Alarm Valve or Flow Indicator Alarm Device Maximum Time to Operate Through Test Pipe Type Make Model Min. Sec. Water Flow Potter VSR 30-45 Dry Pipe Operating Test Dry Valve Q.O.D. Make Model Serial No. Make Model Serial No. Time to Trip Trip Point Time Water Alarm Through Water Air Air Reached Operated Test Pipe* Pressure Pressure Pressure Test Outlet* Properly Min. Sec. Psi (Bar) Psi (Bar) Psi (Bar) Min. Sec. Yes No Without Q.O.D. With Q.O.D. If no, explain. Deluge and Preaction Valves Operation ❑ Pneumatic ❑ Electric ❑ Hydraulic Piping supervised? ❑ Yes ❑ No Detecting media supervised? ❑ Yes ❑ No Is there an accessible facility in each circuit for testing? ❑ Yes ❑ No If no, explain. Does each circuit operate Does each circuit Maximum Time to supervision loss alarm? operate valve release? Operate Release Make Model Yes No Yes No Min. Sec. Test Description HYDROSTATIC: Hydrostatic tests shall be made at not less than 200 psi (13.6 bar)for two hours or 50 psi (3.4 bar) above static pressure in excess of 150 psi (10.2 bar)for two hours. Differential dry pipe valve clappers shall be left open during test to prevent damage. All aboveground piping leakage shall be stopped. FLUSHING: Flow the required rate until water is clear as indicated by no collection of foreign material in burlap bags at outlets such as hydrants and blow-offs. Flush at flows not less than 400 gpm (1514 L/min)for 4-in. (102-mm) pipe, 600 gpm (2271 L/min)for 5-in. (127-mm) pipe, 750 gpm (2839 L/min)for 6-in. (152-mm) pipe, 1000 gpm (3785 L/min)for 8-in. (203-mm) pipe, 1500 gpm (5678 L/min)for 10-in. (254-mm) pipe and 2000 gpm (7570 L/min)for 12-in. (305-mm) pipe. When supply cannot produce stipulated flow rates, obtain maximum available. *Measured from time inspector's test pipe is opened. PAGE 2 of 3 Copyright©2000 National Fire Protection Association FORM 2-i 0 Automatic Sprinkler Systems Contractor's Material and Test Certificate for Aboveground Piping (coat.) Test Description (cont.) PNEUMATIC: Establish 40 psi (2.7 bar) air pressure and measure drop, which shall not exceed 1112 psi (0.1 bar) in 24 hours. Test pressure tanks at normal water level and air pressure and measure air pressure drop, which shall not exceed 1112 psi (0.1 bar) in 24 hours. Tests All piping hydrostatically tested at 200+ psi (bar)for 2 hrs. Dry piping pneumatically tested? ❑ Yes ❑ No Equipment operates properly? ❑ Yes ❑ No If no, state reason. Drain test—Reading of gauge located near water supply test pipe: Static pressure: 65 psi (bar) Drain test—Residual pressure with valve in test pipe open wide: 55 psi (bar) Underground mains and lead-in connections to system risers flushed before connections made to sprinkler piping Verified by copy of the U Form No. 85B 1-1 Yes ❑ No ❑ Other Flushed by installer of underground sprinkler piping 0 Yes ❑ No ❑ Other If other, explain. Blank Testing Gaskets Number used Locations N/A Number removed Welding Welded piping? ❑ Yes ❑ No If yes, Do you certify as the sprinkler contractor that welding procedures comply with the requirements of at least AWS D10.9, Level AR-3? ❑ Yes ❑ No Do you certify that the welding was performed by welders qualified in com- pliance with the requirements of at least AWS D10.9, Level AR-3? ❑ Yes ❑ No Do you certify that welding was carried out in compliance with a documented quality control procedure to insure that all discs are retrieved, that openings in piping are smooth, that slag and other welding residue are removed, and that the internal diameters of piping are not penetrated? ❑ Yes No Hydraulic Data Nameplate Nameplate provided? 0 Yes ❑ No If no, explain. Remarks Date left in service with all control valves open: Sprinkler Contractor: Unlimited Mechanical, Inc. Signatures of Test Witnesses For property owner(signed) Title Date President 06/11/2019 For sprinkler contractor(signed) ��yrw �•��� Title Date PAGE 3of3 Copyright©2000 National Fire Protection Association Permit#: 2562 Permit Date: 05/16/19 Permit Type: FIRE SPRINKLER Project Name: Meeco Manufacturing - Fire Sprinkler Applicant Name: Unlimited Mechanical, Inc. Applicant Address: PO Box 1457 Applicant, City, State, Zip: Marysville,WA 98270 Contact: Shelley Johnson Phone: 425-583-4775 Email: shelley@umifireprotection.com Scope of Work: Valuation: 4050.00 Square Feet: 0 Number of Stories: 0 Construction Type: Occupancy Group: ID Code: Permit Issued: 05/31/2019 Permit Expires: Form Permit Type: Status: COMPLETE Assigned To: Raelynn Jones Property Parcel# Address Legal Description Owner Name Owner Phone Zoning 399 Other 00746300001100 19704 60TH AVE NE LLC 4 Properties Miscellaneous Manufacturing NEC Contractors Contractor Primary Contact Phone Address Contractor Type License License# UNLIMITED Shelley Johnson 425-583-4775 19221 63rd CONSTRUCTION Labor&UNLIMMI093M6 MECHANICAL INC Avenue NE#2 CONTRACTOR Industires Inspections Date Inspection Type Description Scheduled Date Completed Date Inspector Status 06/11/2019 FS07.FIRE 06/11/2019 FIRE Approved SPRINKLER FINAL Plan Reviews Date Review Type Description Assigned To Review Status 05/16/2019 FIRE SPRINKLER BUILDING 1.Permit and set of approved plans to remain on site during installation. 2.Significant deviations from approved plans made during installation shall be required to be resubmitted for review prior to inspections:may include hangers,earthquake bracing,sprinkler locations and pipe re-routing that could impact hydraulic calculations.Failure to submit revisions could result in cancellation of an inspection while a review of an as-built resubmittal is conducted. 3.Hangers and earthquake bracing shall be installed in 05/16/2019 FIRE SPRINKLER accordance with NFPA 13. FIRE 4.Sway bracing required on 2 inch cross mains in Knit/Powder rooms. 5.Hydrostatic test required:System pressure for 2 hours minimum 6.Sprinkler system Contractor's Material and Test Certificate shall be submitted prior to close out of permit. 7.Owner shall be provided with a set of approved plans and associated documents for their files. 8.Call at least 48 hours in advance to schedule inspections. Fees Fee Description Notes Amount Fire System Plan Review Table 4-1 $100.00 Fire Sprinkler System Commercial NFPA 13/13R $162.56 Processing/Technology $25.00 Credit Card Service $8.63 Total $296.19 Attached Letters Date Letter Description 05/30/2019 Building Permit Payments Date Paid By Description Payment Type Accepted By Amount 05/20/2019 Wayne Williams 75424363 iTransact CC $287.56 05/20/2019 Wayne Williams CC Surcharge Transaction Kristin Foster $8.63 #75424363 Outstanding Balance $0.00 Uploaded Files Date File Name 05/31/2019 5135489-2562 Signed permit.pdf 05/16/2019 5079391-2562 Application.pdf Date: 03/27/2026 Permit#: 2562 Permit 05/16/2019 Date: Review 05/16/2019 Date: Permit FIRE SPRINKLER Type: Review FIRE SPRINKLER Type: Target Date: Scheduled 00:00 Time: Completed 05/20/2019 Date: Description: 1. Permit and set of approved plans to remain on site during installation. 2. Significant deviations from approved plans made during installation shall be required to be resubmitted for review prior to inspections: may include hangers, earthquake bracing, sprinkler locations and pipe re-routing that could impact hydraulic calculations. Failure to submit revisions could result in cancellation of an inspection while a review of an as-built resubmittal is conducted. 3. Hangers and earthquake bracing shall be installed in accordance with NFPA 13. 4. Sway bracing required on 2 inch cross mains in Knit/Powder rooms. 5. Hydrostatic test required: System pressure for 2 hours minimum 6. Sprinkler system Contractor's Material and Test Certificate shall be submitted prior to close out of permit. 7. Owner shall be provided with a set of approved plans and associated documents for their files. 8. Call at least 48 hours in advance to schedule inspections. Review Status: Assigned FIRE To: Time In: 00:00 Time Out: 00:00 Hours: 0.0 Property Information Parcel#: 00746300001100 19704 Properties LLC 19704 Properties LLC 7722 21 st Ave NE 19704 60TH AVE NE Seattle,WA 98115 Zoning: 399 Other Miscellaneous Manufacturing NECLot: Block: ocl i p A m 0 m I,. 0 z :ENO t O it£ O 1 IS1y O L4 O ... -11 -n �w T C10-o] _ Cts 01 cz N I� Sn P�x1' Sao Jo m O. O il£ O t!f O 511f O 1 O 1 O I O1'- - o Ell T [IS-D] 7� I � "-T'--e'-n}'—�..--_q'-n}'�T`'-s}'. -0 li to'a°---•i`ta'-a'—�1---�°._o.. �'._0.-. 'I o A �3- r m � m o� �z z��^ Am x omN 1. yo o A x A II x D z I i'J VIW cn I it '. m -------_.--- --- --------------- �'.. o � I � I I F s --- X ` z V/ o N p O X ' FAO z p O D p T O= U D 7 00 T� o M o�;�v r A e -0 z� x i -a- N N D TI 3 v°' z m , > M J o 0 C MC 1z o Z o D r f s _ 71 K/ 7 it, F O uD 0 0- nz IM ___-__-_ - -_- m _--_- 0. 116. o iN r q OJ > v- S D D o S O D m o X 70 O m Z O T u) N GO m D D In Z f*t Trl r0 C � m O { O D D Ir'' V/ m z Ka O > m (7) n D II 2 2 O ON D O DN 1%z 12-0 �l I _— _a ® A C m OIt rn p X NO Tv D 11 / 0 o N it N > p O D D z o z m II p C v/00 0 49-1 I _ -_- + 8 O, Z D D D,o p<A O� OD� <A O Z m Tt m N O O OD0 0 OZ 0 C' m C � C C on Z ZOWj m < <> m C� 1=O A3 D D ➢ XN T Z oti IJ < m v m m o c A D C Z Z z M m-I ajlo O O p� III ( I Y I p S K m 0 0 0 { O 0 0 0 3 O b m m \\\z Z D D VI O n S C m S vOi r _i m$ D D D ➢Z AO� ZA OD �O D OT Z r O Z A �r S V �mm OA II FI NNN !n� DmO .,'[�j.Z mD GJ� 00] O fzn ➢ Z O moDm ZZ_ DT. Fm _ -�� m w m A m c z D C � r m (A S m _ I n >I� Z Z� Z Z� .Tl Z OZ n O Vl A O D Z m Z r r O A m D �o r �fn FT�1 �OOO OGJD O {D A r CD T/ Z ( C) Z A O I w VI m � O � f<*1 f<�i N G1 r N Z S m om- m D� z it O �.. OO z y D S M-;z D O Z A ➢ D N -D-1 0 7,O�O Om O OOy •1-I .� mac r O m 1•I X .J I m .. O r d 1 0 r ~ O Z = � .m O O➢ Z ➢0 A N Z...,0-' m -D- .-m __..�_r'a�.�.(� �__'-_..0._z Jar __ -....-__t -.�� .�ee.^_-^'l^^•. m (n A D A N O r m lD ^ C D �<m {S m Off] m O m Z Vl D " A AI Z A-I my i �D nmm D O DS 00 O O Z� NmcC `O-'m C� mZ O A D D O fZ�1 O O O{ A = ~ N Z O m O- , ---� O o N _ m O O N O z! mON �W O DC �m O O O C> DOOM Om { it T Z O A m C. Z Z r m O O 0 3 r m D 3l Z p O ➢ y Z O Z D O O m O O Z 3 � A f<*1 fbn "3 U z '•N -0 III 1 1p C Z CO IID I➢ ca A O-I m mx fSn Z Z m 0 b O = O N cm, CmD m CF� a N 1 m D (A< Al O D-mri �? � 47 Z D � W SSC) ,- < O D O JJ r 0 VI !n Z r*i D C C m m TI m A O D TT T m Zm m O A Z C D Z D V r O m� �x 'i k INZfn� r� D AZ m f- m Zto -' -I D D C 3 W z 00 O Z m v W O m{O-mp Om m� 1I ✓l zOD FTI 0 N y{ O m m O -ZI to D OmN D '^m �� - 'O m�s Qr y (n O -�Z 1 z { D N V I 'J'• moo ma •� , o v o m T m O Z = z omm m=A. z z N m N c o O m m z N S c� m D_ c -*r c A z 0 z m z o \ 'S C Z D 1 ® z^y ov o o ��o " o c� ' m N m S V O N r Oc-a LLL �m D ,6 G THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND COPYRIGHT OF KLEIN FIRE PROTECTION AND SHALL NOT BE USED ON ANY OTHER WORK EXCEPT BY AGREEMENT WITH KLEIN FIRE PROTECTION ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF KLEIN FIRE PROTECTION PRIOR TO THE COMMENCEMENT OF ANY WORK. A m z MEECO MANUFACTURING D o � z a O 19704 60TH AVE. NE A ARLINGTON, WASHINGTON 98223 ��°"� �'• Z T \p1I\'' •UNl MMI r m _ UNLIMITED MECHANICAL m -n P.O. BOX 1457 — MARYSVILLEXASHINGTON 98270 N O z ® Professional Fire Protection Services, System Deslen and Installation o 7 0 PHONE 360 557-2182 FAX (36O) 435--4802 FIRE PROTECTION BUREAU — PLAN REVIEW PO Box 42600 O�0 Olympia WA 98504-2600 nASnINGTON STATE PATROL",+�REN11�'� (360) 596-3911 FAX: (360) 596-3934 . NFPA 13 SPRINKLER INSTALLATION CERTIFICATION Permit#: 2562 Date: 06/11/2019 Property Protected System Installer System Supplier Business Name: Meeco lUnlimited Mechanical, Inc. Core&Main Address: 19704 60th Ave NE PO Box 1457 PO Box 28330 Arlington,WA. 98223 Marysville, WA. 98270 St. Louis, MO 63146 Representative: I Wayne Williams 314-372-2911 Telephone: 360-657-2182 Location of Plans: GC Office Location of Owner's Manual: Riser Room 1. Certification of System Installation: Complete this section after the system is installed, but prior to conducting operational acceptance tests. This system installation was inspected and found to comply with the installation requirements of: NFPA 13 IFC and IBC Manufacturer's Instructions Other(specify: FM, UL, etc.) Print Name: Wayne Williams Signed: ,n�� Date: 06/11/2019 Organization: Unlimited Mechanical, Inc. 2. Certification of System Operation: All operational features and functions of this system were tested and found to berating properly in accordance with the requirements of: NFPA 13 IFC and IBC Manufacturer's Instructions Other(specify) Print Name: Wayne Williams Signed: '� +� Date: 06/11/2019 Organization: Unlimited Mechanical, Inc. Sprinkler Information for Storage in 2002 NFPA 13, Chapter 12 and IFC Chapter 23 3000-420-105 7/07