HomeMy WebLinkAbout115 W HAZEL AVE_BLD1161_2026 �11Y o� COMMERCIAL MECHANICAL
• PERMIT APPLICATION
��ilvGSp Department of Community& Economic Development
City of Arlington• 18204 59th Ave NE• Arlington, WA 98223• Phone(360) 403-3551
THIS APPLICATION MUST BE ACCOMPANIED BY TWO (2) SETS OF CONSTRUCTION DRAWINGS AND ALL
OTHER INFORMATION OUTLINED IN THE MECHANICAL PERMIT SUBMITTAL REQUIREMENTS, IF APPLICABLE.
Type of Permit: ❑ New Installation �✓ Replacement ❑ Alteration
Project Address: 115 Florence St Arlington, WA 98223 Parcel #: 00560500000101
Replace existing gas furnace with new gas furnace in
Project Description:same location, no new qas piping. Valuation:
4,570.00
Owner: Craig Jacobsen Phone#:425-367-7218
Address: 115 Florence St City: Arlington State:WA Zip:98223
Email Address: craigjacobsen9152@comcast.net
ryan adclitt
Contact Person: Phone #: 425-775-6464
Address: 16614 13th Ave W City:Lynnwood State: WA Zip: 98037
Email Address:bryan@dayandnite.net
Contractor Name:Day and Nite Plumbing and Heating Inc Phone #: 425-775-6464
Contractor Address: 16614 13th Ave W City:Lynnwood State:WA Zip:98037
Email:bryan@dayandnite.net Contact Person: Bryan Radcliff
Contractor License Number: DAYNIPH944RQ Expiration: 1/1/17
Please indicate type of number of appliances:
FURNACE 1 CONDENSING UNIT GAS PIPING OUTLET
BOILER HEAT PUMP(multi-split) UNIT HEATER
CHILLER HEAT PUMP(mini-split) PAINT BOOTH
COOLER HEAT PUMP(other) TYPE I HOOD
AC(air cooled) HEAT REJECTION EQUIP TYPE II HOOD
AC(water cooled) VENTILATION SYSTEM AST
AC(evaporator) PACKAGED UNIT UST
AC(VRF) DRYER OTHER
I hereby certify that the above information is correct and that the construction on, and the occupancy and the use of the above-
described property will b rules and regulation of the State of Washington.
Applicants Signature: ' �ga4t Date 10/04/2016
Applicants Printed Name: Bryan Radcliff
FOR STAFF USE ONLY
Permit# Accepted By Amount Received Receipt# Date Received
6/16LP Page 1 of 1
CITY OF ARLINGTON11
238 N. OLYMPIC AVE-ARLINGTON, WA. 98223
4
PHONE; (360)403-3551
BUILDING PERMIT
Address:115 W Hazel Ave Permit#:1161
Parcel#:00560500000101 Valuation:4570.00
OWNER APPLICANT CONTRACTOR
Name:JACOBSEN CRAIG A&LISA A Name:Day and Nite Plumbing and Heating,Inc. Name:Day&Nite Plumbing&Heating,Inc
Address:I l5 FLORENCE ST Address:16614 13th Ave W Address: 16614 13th Ave W
City,State Zip:ARLINGTON,WA 98223 City,State Zip:Lynnwood,WA 9837 City,State Zip:Lynawood,WA 98037
Phone: Phone:425-775-6464 Phone:425-775-6464
MECHANICAL CONTRACTOR PLUMBING CONTRACTOR
Name:Day&Nite Plumbing&Heating,Inc Name:
Address:16614 13th Ave W Address:
City,State,Zip:Lynnwood,WA 98037 City,State,Zip:
Phone:425-775-6464 Phone:
LIC#:DAYNIPH944RQ EXP: 01/01/2017 LIC#: EXP:
JOB DESCRIPTION
PERMIT TYPE: Residential Mechanical CODE YEAR: 2015
STORIES: CONST.TYPE:
DWELLING UNITS: 1 OCC GROUP:
BUILDINGS: OCC LOAD:
PERMIT APPROVAL
I AGREE TO COMPLY WITH CITY AND STATE LAWS REGULATING CONSTRUCTION AND IN DOING THE WORK AUTHORIZED
THEREBY;NO PERSON WILL BE EMPLOYED IN VIOLATION OF THE LABOR CODE OF THE STATE OF WASHINGTON RELATING TO
WORKMEN'S COMPENSATION INSURANCE AND RCW 18.27.
THIS APPLICATION IS NOT A PERMIT UNTIL SIGNED BY THE BUILDING OFFICIAL OR HIS/HER DEPUTY AND ALL FEES ARE PAID,
IT IS UNLAWFUL TO USE OR OCCUPY A BUILDING OR STRUCTURE UNTIL A FINAL INSPECTION HAS BEEN MADE AND APPROVAL OR
A CERTIFICATE OF OCCUPANCY HAS BEEN GRANTED. IBCI 10/IRCI 10.
SALES TAX NOTICE:Sales tax relating to construction and construction materials in the City of Arlin sl c ichorted on your sales tax return form
and pled City of Arlington#3 1.
Signature Print Name Date ensed By Date
CONDITIONS
Approved as submitted.Adhere to model#915SA42060S 17. Duct testing is required per the 2015
Washington State Energy code R402.4.1.2. Additional requirements: 3" concrete pad with seismic bracing
attached to pad,electrical disconnect is required, lines shall be insulated and the use of adhesive tape is not
permitted.
THIS PERMIT AUTHORIZS ONLY THE WORK NOTED,THIS PERMIT COVERS WORK TO BE DONE ON PRIVATE PROPERTY ONLY, ANY
CONSTRUCTION ON THE PUBLIC DOMAIN(CURBS,SIDEWALKS,DRIVEWAYS,MARQUEES,ETC.)WILL REQUIRE SEPARATE PERMISSION.
PERMIT FEES
Date Description Fee Amount
10/5/2016 Furnace $25.00
10/5/2016 Mechanical Permit Base Fee $25.00
Total Due: S50.00
Total Payment: $50.00
Balance Due: S0.00
CALL FOR INSPECTIONS
BUILDING(360)403-3417
When calling for an inspection please leave the following information:
CITY OF ARLINGTON
% 238 N. OLYMPIC AVE -ARLINGTON, WA. 98223
PHONE; (360) 403-3551
BUILDING PERMIT
Address: 115 W Hazel Ave Permit#:1161
Parcel#:00560500000101 Valuation:4570.00
OWNER APPLICANT CONTRACTOR
Name:JACOBSEN CRAIG A&LISA A Name:Day and Nite Plumbing and Heating,Inc. Name:Day&Nite Plumbing&Heating,Inc
Address: 115 FLORENCE ST Address:16614 13th Ave W Address: 16614 13th Ave W
City,State Zip:ARLINGTON,WA 98223 City,State Zip:Lynnwood,WA 9837 City,State Zip:Lynnwood,WA 98037
Phone: Phone:425-775-6464 Phone:425-775-6464
MECHANICAL CONTRACTOR PLUMBING CONTRACTOR
Name:Day&Nite Plumbing&Heating,Inc Name:
Address: 16614 13th Ave W Address:
City,State,Zip:Lynnwood,WA 98037 City,State,Zip:
Phone:425-775-6464 Phone:
LIC#:DAYNIPH944RQ EXP: 01/01/2017 LIC#: EXP:
JOB DESCRIPTION
PERMIT TYPE: Residential Mechanical CODE YEAR: 2015
STORIES: CONST.TYPE:
DWELLING UNITS: 1 OCC GROUP:
BUILDINGS: OCC LOAD:
PERMIT APPROVAL
I AGREE TO COMPLY WITH CITY AND STATE LAWS REGULATING CONSTRUCTION AND IN DOING THE WORK AUTHORIZED
THEREBY;NO PERSON WILL BE EMPLOYED IN VIOLATION OF THE LABOR CODE OF THE STATE OF WASHINGTON RELATING TO
WORKMEN'S COMPENSATION INSURANCE AND RCW 18.27.
THIS APPLICATION IS NOT A PERMIT UNTIL SIGNED BY THE BUILDING OFFICIAL OR HIS/HER DEPUTY AND ALL FEES ARE PAID.
IT IS UNLAWFUL TO USE OR OCCUPY A BUILDING OR STRUCTURE UNTIL A FINAL INSPECTION HAS BEEN MADE AND APPROVAL OR
A CERTIFICATE OF OCCUPANCY HAS BEEN GRANTED. IBCI 10/IRCI]0.
SALES TAX NOTICE:Sales tax relating to construction and construction materials in the City of Arlin sl c reported on your sales tax return form
and coded City of Arlington#3101.
Signature Print Name Date cased By Date
CONDITIONS
Approved as submitted. Adhere to model #915SA42060S17. Duct testing is required per the 2015
Washington State Energy code R402.4.1.2. Additional requirements: 3" concrete pad with seismic bracing
attached to pad, electrical disconnect is required, lines shall be insulated and the use of adhesive tape is not
permitted.
THIS PERMIT AUTHORIZS ONLY THE WORK NOTED.THIS PERMIT COVERS WORK TO BE DONE ON PRIVATE PROPERTY ONLY. ANY
CONSTRUCTION ON THE PUBLIC DOMAIN(CURBS,SIDEWALKS,DRIVEWAYS,MARQUEES,ETC.)WILL REQUIRE SEPARATE PERMISSION.
PERMIT FEES
Date Description Fee Amount
10/5/2016 Furnace $25.00
10/5/2016 Mechanical Permit Base Fee $25.00
Total Due: S50.00
Total Payment: $50.00
Balance Due: $0.00
CALL FOR INSPECTIONS
BUILDING(360)403-3417
When calling for an inspection please leave the following information:
Permit Number,Type of Inspection being requested,and whether you prefer morning or afternoon
915SA 1
LEGACY LINE SINGLE-STAGE
P1 R"
CONDENSING 1
Product uct data
STANDARD FEATURES
• 4-way multipoise design for upflow,downflow or horizontal
O installation.
• Optional through-the-cabinet downflow venting.
Q • Installation flexibility with a 360-degree rotating elbow.
• Ideal condensing furnace height 35"cabinet:short enough for
taller coils,but still allows enough room for service.
• Silicon Nitride Perfect Light" Hot Surface Igniter.
t • Aluminized-steel primary heat exchanger.
® • Stainless-steel condensing secondary heat exchanger.
(� • High-quality corrosion-resistant prepainted steel cabinet with
hemmed edges for safety.
• Factory-configured ready for upflow applications.
• Direct-vent/sealed combustion,single-pipe venting or ventilated
combustion air.
• PSC blower motor,single-speed inducer motor,and single-stage
gas valve.
At1264 . Self-diagnostics
• Approved for Twinning applications(30060 through 60120
sizes,only).
The 915S Multipoise Condensing Gas Furnace is part of the . propane convertible(See accessory list).
Legacy Line product offering. Sporting a PSC blower motor and
an Annual Fuel Utilization Efficiency (AFUE) of 95.5%, this • Approved for Manufactured Housing/Mobile Home applications
single-stage gas furnace provides efficient comfort for (except 26,000 and 140,000 Btuh input)with MH accessory kit.
homeowners.This Legacy Line Gas Furnace also features 4-way . Convenient Air Purifier and Humidifier electrical connections.
multipoise installation flexibility, and is available in eleven model . Residential installations may be eligible for consumer financing
sizes.All sizes except the 26,000 BTUH model can be vented for
direct vent/two-pipe, ventilated combustion air, or single-pipe through the Retail Credit Program.
applications. The 26,000 BTUH model can use the same 2-pipe • Certified to leak 2%or less of nominal air conditioning CFM
venting system using outside air for combustion, but is not delivered when pressurized to 1-inch water column with all
considered direct-vent. A BryantOO Air Conditioner or Heat Pump present air inlets,air outlets,and condensate drain port(s)are
can be used to form a complete system.All units meet California
Air Quality Management District emission requirements. These sealed.
furnaces are approved for Manufactured Housing (Mobile Home)
applications.All sizes are design certified in Canada.
AMRS1 CERTIFIED
LEGACY — sw
Use oflhe AHRI Cerlilied m Mark indkales a
CEflTIFIED
nunufocturer's panicipalion in the program.For
verification ofcenifiration for individual products.
11S0 90�1 gotosvtlw.ahridireclory.org.
nNl-SPI 001
1
CASING RATED HEATING HEATING AIRFLOW
DIMENSIONS(IN.) OUTPUTt COOLING CFM
MOTOR HP-SPEED
SAP ORDERING NO. @ 0.5 ESP
H D W (BTUH) AFUE CFM$ Heating ESP (in.W.C.) TAPS
(in.W.C.)
915SA24026S14 35 29.5 14.2 25,000 95.5% 675 0.10 440-775 1/4-4
915SA3004OS14 35 29.5 14.2 39,000 95.5% 820 0.10 625-905 1/2-4
915SA36040S17 35 29.5 17.5 39,000 95.5% 1000 0.10 650-1050 1/2-5
915SA300 35 29.5 14.2 58,000 95.5% 840 0.12 675-1130 1/2-4
915SA42060S17 35 29.5 17.5 58,000 95.5% 980 0.12 650-1420 1/2-5
915SA48080S17 35 29.5 17.5 78,000 95.5% 1040 0.15 810-1600 3/4-5
915SA6008OS21 35 29.5 21.0 78,000 95.5% 1695 0.15 1335-1970 1-5
915SA4210OS21 35 29.5 21.0 97,000 95.5% 1510 0.20 915-1545 112-4
915SA6010OS21 35 29.5 21.0 97,000 95.5% 1680 0.20 1345-2065 1-5
915SA6012OS24 35 29.5 24.5 117,000 95.5% 2245 0.20 1320-2105 1-5
915SA6014OS24 35 29.5 24.5 135,000 95.5% 2175 0.20 1290-2035 1-5
t Capacity in accordance with DOE test procedures. Ratings are position dependent. See rating plate.
*Heating CFM at factory default blower motor heating tap settings.
ESP-External Static Pressure
FEATURES AND BENEFITS
HYBRID HEAT@ Dual Fuel system-This system can provide Direct or Single-pipe Venting, or Optional Ventilated
more control over your monthly energy bills by automatically Combustion Air-All sizes except the 26,000 BTUH model can
selecting the most economical method of heating. With HYBRID be vented for direct vent/two-pipe, ventilated combustion air, or
HEAT,our system automatically switches between the gas furnace single-pipe applications. The 26,000 BTUH model can use the
and the single-stage electric heat pump as outside temperatures same 2-pipe venting system using outside air for combustion,but
change to maintain greater efficiency and comfort than with any is not considered direct-vent. This provides added flexibility to
traditional single-source heating system. The heat pump also meet diverse installation needs.
delivers high-efficiency cooling in the summer. Sealed Combustion System-This furnace brings in combustion
air from outside the furnace, which results in especially quiet
Power Heat'" Igniter-Bryant's unique SiN igniter is not only operation. By sealing the entire combustion vestibule, the entire
physically robust but it is also electrically robust. It is capable of furnace can be made quieter,not just the sound of the burners.
running at line voltage and does not require complex voltage
regulators as do other brands.This unique feature further enhances Monoport Burners - The burners are specially designed and
the gas furnace reliability and continues Bryant's tradition of finely tuned for smooth, quiet combustion and economical
technology leadership and innovation in providing a reliable and operation.
durable product. Bottom Closure - Factory-installed for side return; easily
Reliable Heat Exchanger Design-The aluminized steel, clam removable for bottom return. The multi-use bottom closure can
shell primary heat exchanger was re-engineered to achieve greater also serve for roll-out protection in horizontal applications,and act
efficiency out of a smaller size. The first two passes of the heat as the bottom closure for the optional return air base accessory.
exchanger are based on the current 80% product, a design with Blower Access Panel Switch- Automatically shuts off 115-v
more than ten years of field-proven performance and success. power to furnace whenever blower access panel is opened.
These innovations, paired with the continuation of a crimped, Quality Registration - Our furnaces are engineered and
no-weld seam create an efficient, robust design for this essential manufactured under an ISO 9001 registered quality system.
component. Certifications- This furnace is CSA (AGA and CGA) design
The condensing heat exchanger, a stainless steel fin and tube certified for use with natural and propane gases. The furnace is
design, is positioned in the furnace to extract additional heat. factory-shipped for use with natural gas. A CSA listed gas
Stainless steel coupling box componentry between heat exchangers conversion kit is required to convert furnace for use with propane
has exceptional corrosion resistance in both natural gas and gas.The efficiency is AHRI efficiency rating certified.This furnace
propane applications. meets California Air Quality Management District emission
4-Way Multipoise Design - One model for all applications- requirements.
there is no need to stock special downflow or horizontal models
when one unit will do it all. The new heat exchanger design allows
these units to achieve the certified AFUE in all positions.
2
SPECIFICATIONS
The furnace should be sized to provide 100 percent of the design method to calculate heating load estimates and select the furnace.
heating load requirement plus any margin that occurs because of Excessive oversizing of the furnace may cause the furnace and/or
furnace model size capacity increments. None of the furnace vent to fail prematurely,customer discomfort and/or vent freezing.
model sizes can be used if the heating load is 12,000 BTUH or Failure to follow these guidelines is considered faulty installation
lower. Use Air Conditioning Contractors of America (Manual J and/or misapplication of the furnace;and resulting failure,damage,
and S); American Society of Heating, Refrigerating, and or repairs may impact warranty coverage.
Air-Conditioning Engineers; or other approved engineering
Heating Capacity and Efficiency 24026 30040 36040 30060 1 42060 F 48080 60080 42100 60100 60120 60140
Input High Heat ( )BTUH 26,000 40,000 40,000 60,000 60,000 80,000 80,000 100,000 100,000 120,000 140,000
Output High (BTUH) 25,000 39,000 39,000 58,000 58,000 78,000 78,000 97,000 97,000 117,000 135,000
Heat
Certified Temperature 25-55 40-70 35-65 40-70 40-70 40-70 40-70 40-70 40-70 40-70 45-75
Rise Range OF(°C) High Heat (14-31) (22-39) (19-36) (22-39 (22-39) (22-39) (22-39) (22-39) (22-39) (22-39) 1(25-42)
Airflow Capacity and Blower Data 24026 30040 36040 30060 42060 48080 60080 42100 60100 60120 60140
Rated External Static Heating 0.10 0.10 0.10 0.12 0.12 0.15 0.15 0.20 0.20 0.20 0.20
Pressure(in.W.C.) Cooling 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
Airflow Delivery High Heat 675 820 1000 840 980 1040 1695 1510 1680 2245 2175
@ Rated ESP(CFM) Cooling 775 905 1050 1130 1420 1600 1970 1545 2065 2105 2035
Cooling Capacity(tons) 400 CFM/ton 1.5 2 2.5 2.5 3.5 4 5 4 5 5 5
350 CFM/ton 2 2.5 3 3 4 4.5 5.5 4.5 6 6 6
Direct-Drive Motor Type Permanent Split Capacitor(PSC)
Direct-Drive Motor HP 0.25 0.5 1 0.5 0.5 0.5 0.75 1 1 0.5 1 1 1 1
Motor Full Load Amps 2.8 6.2 6.8 6.2 6.8 7.9 13.8 6.5 13.8 14.1 14.1
RPM Range 500-1150
Speed Selections 4 4 5 4 5 5 1 5 1 4 1 5 5 5
Blower Wheel Dia x Width in. 11x7 11x7 11x8 11x7 11x8 11x8 1 14-In 1 14-In 11x10 11x1I 11x11
Air Filtration System Field Supplied
Filter Used for Certified Watt Data' KGAWF"06UFR
Electrical Data 24026 30040 1 36040 30060 42060 48080 60080 42100 60100 60120 60140
Input Voltage Volts-Hertz-Phase 115-60-1
Operating Voltage Range Min-Max 104-127
Maximum Input Amps Amps 3.6 6.8 8.3 7.0 8.4 9.6 14.5 7.6 14.6 14.9 14.9
UnitAmpacity Amps 5.4 9.5 11.4 9.7 11.5 13.0 19.1 10.4 19.2 19.6 19.6
Minimum Wire Size AWG 14 14 14 14 14 14 12 14 12 12 12
Maximum Wire Length Feet 68 39 32 38 32 28 30 35 29 29 29
@ Minimum Wire Size (M) (20.7) (11.9) (9.8) (11.6) (9.8) (8.5) (9.1) (10.7) (8.8) (8.8) (8.8)
Maximum Fuse/Ckt Bkr
(Time-Delay Type Recom- Amps 15 15 15 15 15 15 20 15 20 20 20
mended)
Transformer Capacity(24vac output) 40 VA
External Control Power Heating 27.9 VA
Available Cooling 34.6 VA
Controls 24026 1 30040 36040 30060 1 42060 48080 1 60080 1 42100 60100 60120 60140
Gas Connection Size 1/2"-NPT
Burners(Monoport) 2 2 2 3 1 3 4 1 4 1 5 5 6 1 7
Gas Valve(Redundant) Manufacturer White Rogers
Minimum Inlet Gas pressure(in.W.C.) 4.5
Maximum Inlet Gas pressure(in.W.C.) 13.6
Ignition Device Silicon Nitride
Limit Control 220 165 180 165 1 180 1 170 1 200 1 180 180 160 1 155
Heating Blower Control(Heating Off-Delay) Adjustable:90,120,150,180 seconds
Cooling Blower Control(Time Delay Relay) 90 seconds
Communication System none
Thermostat Connections Com 24V,R,W,G,Y
Accessory Connections EAC(115vac);HUM(24vac)
See Accessory List for part numbers available.
3
BUILDING INSPECTION REPORT — MECHANICAL (RESIDENTIAL)
Permit No. 1161
Address: 115 W Hazel Ave
Contractor: Day and Nite Plumbing and Heating, Inc.
Owner: Craig Jacobsen
Date: 10/10/2016
® APPROVAL ❑ PARTIAL APPROVAL
❑ CORRECTION ❑ OTHER
APPLIANCE: Gas Furnace Click here to enter text.
CO DETECTOR: ❑ HEAT PUMP/AC UNIT: ❑
GAS PIPING: N DISCONNECT: ❑
DRIP LEG: N SEISMIC: ❑
VENTING: N 3" PAD: ❑
ACCESS: N INSULATION/PROTECTION: ❑
SHUT-OFF VALVE: N
DUCTS: N/A
L&I: Yes
Date: 10/10/2016 Inspector: Kevin Olander
i
I
�
CITY OF ARLINGTON
238 N. OLYMPIC AVE-ARLINGTON, WA. 98223
1 PHONE; (360)403-3551
BUILDING PERM_ T
Address: 115 W Hazel Ave Permit#:1161
Parcel#:00560500000101 Valuation:4570.00
OWNER APPLICANT CONTRACTOR j
Name:JACOBSEN CRAIG A&LISA A Name:Day and Nite Plumbing and Healing,Inc, Name:Day&Nite Plumbing&Healing,[lie
Address: 115 FLORENCE ST Address:166 A l3th Ave W Address: 16614 13th Ave W
City,State Zip:ARLINGTON,WA 98223 City,Slate Zip:Lynnwood,WA 9837 City,State Zip:Lynnwood,WA 98037
Phone: Phone:425-775-6464 Phone:425-775-6464
MECHANICAL-CONTRACTOR PLUMBING CONTRACTOR
Ntune:Day&Nite Plumhing&Heating,Inc Name:
Address:16614 lath Ave W Address:
City,State,Zip:Lynnwood,WA 98037 City,Slate,"Lip:
Phone:425-775-6464 Phone:
LIC#:DAYNIPH944RQ EXP: 01/01/2017 LIC 11: EXP:
JOB'DESCRIPTION
PERMITTYPE: Residential Mechanical CODE YEAR: 2015
STORIES; CONST.TYPE:
DWELLING UNITS; ] OCC GROUP:
BUILDINGS: OCC LOAD:
PERMIT APPROVAL -
I AGREE:TO COMPLY WITH CITY AND STATE LAWS REGULATING CONSTRUCTION AND IN DOING THE WORK AlimoRl'LED
THEREBY;NO PERSON WILL BE EMPLOYED IN VIOLATION OF THE LABOR CODE.OF THE STATE OF WASHINGTON RELATING TO
WORKMEN'S COMPENSATION INSURANCE AND RCW 18.27.
THIS APPLICATION IS NOT A PERMIT UNTIL SIGNED BY THE BUILDING OFFICIAL OR HISAIER DEPUTY AND ALL FEES ARE PAID,
IT IS UNLAWFUL TO USE OR OCCUPY A BUILDING OR STRUCTURE UNTIL A FINAL INSPECTION HAS BEEN MADE AND APPROVAL OR
A CERTIFICATE OF OCCUPANCY HAS BEEN GRANTED, IBCI 10/IRCI IQ
SALES TAX NQ'rICF::Sulu tax relating to construction and construction materials in the City of Arljl� rrsales lax return form
and • ,dCityof Arlingtones I.
0•S.20l(o
Signature r Print Name Date ,used Hy Dale
CONDITIONS
Approved as submitted. Adhere to model#915SA42060S17. Duct testing is required per the 2015
Washington State Energy code R402.4.1.2. Additional requirements: 3" concrete pad with seismic bracing
attached to pad, electrical disconnect is required, lines shall be insulated and the use of adhesive tape is not
permitted.
THIS PERMIT AUTHORIZS ONLY THE WORK NOTED,THIS PERMIT COVERS WORK TO BE DONE ON PRIVATE PROPERTY ONLY, ANY
CONSTRUCTION ON THE PUBLIC DOMAIN(CURBS,SIDEWALKS,DRIVEWAYS,MARQUEES,ETC,1 WILL REQUIRE SEPARATE PERMISSION,
PERMIT FEES
Date Description Fee Amount
10/5/2016 Furnace $25.00
10/5/2016 Mechanical Permit Base Fee $25.00
Total Due: S50.00
Total Payment; $50.00
Balance Due: $0.00
CALL FOR INSPECTIONS
BUILDING(360)•103-3417
When calling for an inspection please(cave the[Following information:
CITY OF ARLINGTON
238 N. OLYMPIC AVE -ARLINGTON, WA. 98223
(N4 P PHONE; (360)403-3551
BUILDING PERMIT
Address: 115 W Hazel Ave Permit#: 1161
Parcel#:00560500000101 Valuation:4570.00
OWNER APPLICANT CONTRACTOR
Name:JACOBSEN CRAIG A&LISA A Name:Day and Nite Plumbing and Heating,Inc. Name:Day&Nite Plumbing&Heating,Inc
Address: 115 FLORENCE ST Address:16614 13th Ave W Address: 16614 13th Ave W
City,State Zip:ARLINGTON,WA 98223 City,State Zip:Lynnwood,WA 9837 City,State Zip:Lynnwood,WA 98037
Phone: Phone:425-775-6464 Phone:425-775-6464
MECHANICAL CONTRACTOR PLUMBING CONTRACTOR
Name:Day&Nite Plumbing&Heating,Inc Name:
Address: 16614 13th Ave W Address:
City,State,Zip:Lynnwood,WA 98037 City,State,Zip:
Phone:425-775-6464 Phone:
LIC#:DAYNIPH944RQ EXP: 01/01/2017 LIC#: EXP:
JOB DESCRIPTION
PERMIT TYPE: Residential Mechanical CODE YEAR: 2015
STORIES: CONST.TYPE:
DWELLING UNITS: I OCC GROUP:
BUILDINGS: OCC LOAD:
PERMIT APPROVAL -
I AGREE TO COMPLY WITH CITY AND STATE LAWS REGULATING CONSTRUCTION AND IN DOING THE WORK AUTHORIZED
THEREBY;NO PERSON WILL BE EMPLOYED IN VIOLATION OF THE LABOR CODE OF THE STATE OF WASHINGTON RELATING TO
WORKMEN'S COMPENSATION INSURANCE AND RCW 18.27.
THIS APPLICATION IS NOT A PERMIT UNTIL SIGNED BY THE BUILDING OFFICIAL OR HIS/HER DEPUTY AND ALL FEES ARE PAID.
IT IS UNLAWFUL TO USE OR OCCUPY A BUILDING OR STRUCTURE UNTIL A FINAL INSPECTION HAS BEEN MADE AND APPROVAL OR
A CERTIFICATE OF OCCUPANCY HAS BEEN GRANTED. IBCI10/IRCI10.
SALES TAX NOTICE:Sales tax relating to construction and construction materials in the City of Arlin e' st a reported on your sales tax return form
and coded City of Arlington#3101. //__
Signature Print Name Date eased By Date
CONDITIONS
Approved as submitted. Adhere to model 4915SA42060S17. Duct testing is required per the 2015
Washington State Energy code R402.4.1.2. Additional requirements: 3" concrete pad with seismic bracing
attached to pad, electrical disconnect is required, lines shall be insulated and the use of adhesive tape is not
permitted.
THIS PERMIT AUTHORIZS ONLY THE WORK NOTED,THIS PERMIT COVERS WORK TO BE DONE ON PRIVATE PROPERTY ONLY. ANY
CONSTRUCTION ON THE PUBLIC DOMAIN(CURBS,SIDEWALKS,DRIVEWAYS,MARQUEES,ETC.)WILL REQUIRE SEPARATE PERMISSION.
PERMIT FEES
Date Description Fee Amount
10/5/2016 Furnace $25 00
10/5/2016 Mechanical Permit Base Fee $25 00
Total Due: $50.00
Total Payment: $50.00
Balance Due: $0.00
CALL FOR INSPECTIONS
BUILDING(360)403-3417
When calling for an inspection please leave the following information:
Permit Number,Type of Inspection being requested,and whether you prefer morning or afternoon
��. C - MECHANICAL
y } PERMIT APPLICATION
Department of Community& Economic Development
City of Arlington• 18204 59th Ave NE• Arlington, WA 98223• Phone(360) 403-3551
THIS APPLICATION MUST BE ACCOMPANIED BY TWO (2) SETS OF CONSTRUCTION DRAWINGS AND ALL
OTHER INFORMATION OUTLINED IN THE MECHANICAL PERMIT SUBMITTAL REQUIREMENTS, IF APPLICABLE.
Type of Permit: New Installation 0 Replacement ❑ Alteration
H
Project Address: 115 A ` Arlington, WA 98223 Parcel#: 00560500000101
Replace existing gas furnace with new gas furnace in
Project Description-same location, no new gas piping. Valuation:
4,570.00
Owner:Craig Jacobsen Phone#:425-367-7218
Address: 115 Florence St City: Arlington State:WA - Zip:98223
Email Address: craigjacobsen9152@comcast.net
Aryan a c i --�--
Contact Person: Phone#: 425-775-6464
Address: 16614 13th Ave W City:Lynnwood State: WA Zip: 98037
Email Address:bryan@dayandnite.net
Contractor Name:Day and Nite Plumbing and Heating Inc Phone #: 425-775-6464
16614 13th Ave W Lynnwood WA 98037
Contractor Address: o
City: Y. _ _ _ _ , _ ._State: Zip:
Email:bryan@dayandnite.net Contact Person Bryan Radcliff
Contractor License Number: DAYNIPH944RQ Expiration 1/1/17 — — —
Please Indicate type of number of appliances:
FURNACE 1 CONDENSING UNIT GAS PIPING OUTLET
BOILER HEAT PUMP(multi-split) UNIT HEATER
CHILLER HEAT PUMP(mini-split) PAINT BOOTH
COOLER HEAT PUMP(other) TYPE I HOOD
AC(air cooled) HEAT REJECTION EQUIP TYPE II HOOD
AC(water cooled) VENTILATION SYSTEM AST
AC(evaporator) PACKAGED UNIT UST
AC(VRF) DRYER OTHER
I hereby certify that the above information is correct and that the construction on, and the occupancy and the use of the above-
described property will be in aoc "•"ie laws, rules and regulation of the State of Washington
I
Applicants Signature: Date 10/04/2016
Applicants Printed Name: Bryan Radcliff
66
i FOR STAFF USE ONLY ReGeffived
_ OCT 0 3 2016
Permit# AcceplAfl3y Amount Received Receipt# Date Received
6116LP Page 1 of 1
. Et . � � N
. �+
1
I
,�
10/4/2016 DAY&NITE PLG&HTG INC
Search L&I
\-Z IT" a Ifoip N ly-I'&I
Safety&Heaith Qaimti&Insumnee Workplace Rights Tracles& Licensing
A^ Washington State Department of .
" Labor & Industries
DAY& NITE PLG & HTG INC
Owner or tradesperson 1661413TH AVE W
Principals LYNNWOOD,WA 98037
425-775-6464
DAVIS, BRUCE ALLEN SR, PRESIDENT SNOHOMISH County _
DAVIS,JUDITH LEE,VICE PRESIDENT
DAVIS,BRUCE ALLEN JR,SECRETARY
DAVIS, BRUCE ALLEN SR,AGENT
KRPAN, DAN,SECRETARY
(End:05/05/2007)
Doing business as
DAY&NITE PLG&HTG INC
WA UBI No. Business type
600 061 976 Corporation
Governing persons
BRUCE
A
DAVIS
DAN KRPAN;
License
Verity the contractor's active registration/license/certification(depending on trade)and any past violations.
Construction Contractor Active.
Meets current requirements.
License specialties
GENERAL
CC-EC Domestic Pump
License no.
DAYNIPH944RQ
Effective—expiration
01/18/2007—01/01/2017
Bond
American Contractors Indem CO $12,000.00
Bond account no.
100239880
Received by L&I Effective date
01/29/2014 02/04/2014
Expiration date
Until Canceled
CBIC $12,000.00
Bond account no.
626568
Received by L&I Effective date
12/18/2006 01/02/2002 Help us improve
https://secure.Ini.wa.gov/verify/Detaii.aspx?UBI=600061976&LIC=DAYNIPH944RQ&SAW= 113
i
10/4/2016 DAY&NITE PLG&HTG INC
Expiration date
Until Canceled
Insurance
Ohio Security Ins Co $1,000,000.00
Policy no.
BKS55998671
Received by L&I Effective date
03/29/2016 04/02/2016
Expiration date
04/02/2017
AMCO Ins Co $1,000,000.00
Policy no.
ACPGLAO7554949983
Received by L&I Effective date
03/18/2016 04/02/2016
Expiration date
04/02/2017
Insurance history
Savings
........ ....
No savings accounts during the previous 6 year period.
Lawsuits against the bond or savings
No lawsuits against the bond or savings accounts during the previous 6 year period.
L&I Tax debts
No L&I tax debts are recorded for this contractor license during the previous 6 year period,but some debts
may be recorded by other agencies.
License Violations
Infraction no.
PBATI01165 Satisfied
Issue date RCW/WAC
09/22/2015 18.106.020
Violation city Violation amount
LYNNWOOD $250.00
Type of violation
PLUMBER INFRACTION
Description
Contractor failed to provide proper
supervision as required.
Infraction no.
PBATI01164 Satisfied
Issue date RCW/WAC
09/22/2015 18.106.020
Violation city Violation amount
LYNNWOOD $250.00
Type of violation
PLUMBER INFRACTION
Description
Contractor failed to provide proper
supervision as required.
Workers' comp
Do you know if the business has employees?If so,verify the business is up-to-date on workers'comp premiums.
This company has multiple workers'comp accounts.
Active accounts Help us improve
hfps://secure.Ini.wa.gov/verify/Detail.aspx?U BI=600061976&LIC=DAYN IPH944RQ&SAW= 2/3
r
I
I
10/4/2016 DAY&NITE PLG&HTG INC
L&I Account ID Account is current.
505,651-02
Doing business as
DAY&NITE PLUMBING&HEATING
Estimated workers reported
Quarter 2 of Year 2016"31 to 50 Workers"
L&I account representative
T1/DESTINY ADAMS(360)902-4873-Email:ADAF235@lni.wa.gov
Track the ratNrtr.t::r a
Workplace safety and health
Check for any past safety and health violations found on jobsites this business was responsible for.
Washington State Dept.of Labor&Industries.Use of this site is subject to the laws of the state of Washington.
https://secure.Ini.wa.gov/verify/Detai i.aspx?U BI=600061976&LIC=DAYN IPH 944RQ&SAW= 3/3
it
1
LEGACY LINE SINGLE—STAGE
4—WAY NIUMPOISE
Product Data
STANDARD FEATURES
• 4-way multipoise design for upflow,downflow or horizontal
installation.
• Optional through-the-cabinet downflow venting.
Q • Installation flexibility with a 360-degree rotating elbow.
• Ideal condensing furnace height 35"cabinet:short enough for
taller coils,but still allows enough room for service.
• Silicon Nitride Perfect Light- Hot Surface Igniter.
o ! _ • Aluminized-steel primary heat exchanger.
• Stainless-steel condensing secondary heat exchanger.
(� • High-quality corrosion-resistant prepainted steel cabinet with
hemmed edges for safety.
• Factory-configured ready for upflow applications.
• Direct-vent/sealed combustion,single-pipe venting or ventilated
J combustion air.
• PSC blower motor,single-speed inducer motor,and single-stage
gas valve.
A11264 . Self-diagnostics
• Approved for Twinning applications(30060 through 60120
sizes,only).
The 915S Multipoise Condensing Gas Furnace is part of the Propane convertible(See accessory list).
Legacy Line product offering. Sporting a PSC blower motor and
an Annual Fuel Utilization Efficiency (AFUE) of 95.5%, this • Approved for Manufactured Housing/Mobile Home applications
single-stage gas furnace provides efficient comfort for (except 26,000 and 140,000 Btuh input)with MH accessory kit.
homeowners. This Legacy Line Gas Furnace also features 4-way • Convenient Air Purifier and Humidifier electrical connections.
multipoise installation flexibility, and is available in eleven model
sizes.All sizes except the 26,000 BTUH model can be vented for ' Residential installations may be eligible for consumer financing
direct vent/two-pipe, ventilated combustion air, or single-pipe through the Retail Credit Program.
applications. The 26,000 BTUH model can use the same 2-pipe Certified to leak 2%or less of nominal air conditioning CFM
venting system using outside air for combustion, but is not delivered when pressurized to 1-inch water column with all
considered direct-vent. A BryantOO Air Conditioner or Heat Pump present air inlets,air outlets,and condensate drain port(s)are
can be used to form a complete system. All units meet California
Air Quality Management District emission requirements. These sealed.
furnaces are approved for Manufactured Housing (Mobile Home) `
applications.All sizes are design certified in Canada. I
LEGACY •
usearlheAHRI Ceniped N Mark iMimlese ® (IptI/IEO
vennu rrndun, penicipaliuv in the propom Far
rifieariun urceniriwlioo ror indi"Juel pwduds.
ISO9001 ealar,rr,nhadir�lary.arp
OINI-lN 001
I
i
CASING RATED HEATING HEATING AIRFLOW COOLING CFM
DIMENSIONS(IN.) OUTPUTr@ ESP MOTOR HP-SPEED
SAP ORDERING NO. 0.5
H D W (BTUH) AFUE CFM$ Heating ESP (in.W.C.) TAPS
(in.W.C.)
915SA24026S14 35 29.5 14.2 25,000 95.5% 675 0.10 440-775 1/4-4
915SA30040S14 35 29.5 142 39,000 95 5% 820 0.10 625-905 1/2-4
915SA3604OS17 35 29.5 17.5 39,000 95.5% 1000 0.10 650-1050 1/2-5
f)15SA30 35 29.5 14.2 58,000 95.5% 840 1 0.12 675-1130 1/2-4
915SA42060S17 35 29.5 1 17.5 58.000 95.5% 980 012 650-1420 1/2-5
915SA48080S17 35 29.5 17.5 78,000 95.5% 1040 0.15 810-1600 3/4-5
915SA6008OS21 35 29.5 21.0 78,000 95.5% 1695 0.15 1335-1970 1-5
915SA4210OS21 35 29.5 21.0 97,000 95.5% 1510 0.20 915-1545 1/2-4
915SA6010OS21 351 29.5 21.0 97,000 95.5% 1680 0.20 1345-2065 1-5
915SA60120S24 35 29.5 24.5 117,000 95.5% 2245 0.20 1320-2105 1-5
915SA6014OS24 35 29.5 24.5 135.000 95.5% 2175 0.20 1290-2035 1 -5
t Capacity in accordance wilh DOE lest procedures. Ratings are po%Ilhm deptomfool Sep rAng plate
*Heating CFM at factory default blower motor heating tap settings.
ESP-External Static Pressure
FEATURES AND BENEFITS
HYBRID H1 ATO Dual Fuel system-This system can provide Direct or Single-pipe Venting, or Optional Ventilated
more control over your monthly energy bills by automatically Combustion Air-All sizes except the 26,000 BTUH model can
selecting the most economical method of heating. With HYBRID be vented for direct vent/two-pipe, ventilated combustion air, or
single-pipe applications. The 26,000 BTUH model can use the
HEAT,our system automatically switches outseenide
the gas furnace same 2-pipe venting system using outside air for combustion,but
and the single-stage electric heat pump a as s o outde temperatures is not considered direct-vent. This provides added flexibility to
change to maintain greater efficiency and comfort than with any meet diverse installation needs.
traditional single-source heating system. The heat pump also
delivers high-efficiency cooling in the summer. Sealed Combustion System-This furnace brings in combustion
Power Heat- Igniter-Bryant's unique SiN igniter is not only air from outside the furnace, which results in especially quiet
physically robust but it is also electrically robust. It is capable of operation. By sealing the entire combustion vestibule, the entire
running at line voltage and does not require complex voltage
furnace can be made quieter, not just the sound of the burners.
regulators as do other brands.This unique feature further enhances Monoport Burners - The burners are specialty designed and
the gas furnace reliability and continues Bryant's tradition of finely tuned for smooth, quiet combustion and economical
technology leadership and innovation in providing a reliable and operation.
durable product. Bottom Closure - Factory-installed for side return; easily
Reliable Heat Exchanger Design-The aluminized steel, clam removable for bottom return. The multi-use bottom closure can
shell primary heat exchanger was re-engineered to achieve greater also serve for roll-out protection in horizontal applications,and act
efficiency out of a smaller size. The first two passes of the heat as the bottom closure for the optional return air base accessory.
exchanger are based on the Current 80% product, a design with Blower Access Panel Switch Automatically shuts off 115-v
more than ten years of field-proven performance and success. power to furnace whenever blower access panel is opened.
These innovations, paired with the continuation of a crimped, Quality Registration - Our furnaces are engineered and
no-weld seam create an efficient, robust design for this essential manufactured under an[SO 9001 registered quality system.
component. Certifications-This furnace is CSA (AGA and CGA) design
The condensing heat exchanger, a stainless steel fin and tube certified for use with natural and propane gases. The furnace is
design, is positioned in the furnace to extract additional heat. factory-shipped For use with natural gas. A CSA listed gas
Stainless steel coupling box componentry between heat exchangers conversion kit is required to convert furnace for use with propane !
has exceptional corrosion resistance in both natural gas and gas.The efficiency is AHRI efficiency ratting certified.This furnace
propane applications. meets California Air Quality Management District emission
4-Way Multipoise Design - One model for all applications - requirements.
there is no need to stock special downflow or horizontal models
when one unit will do it all. The new heat exchanger design allows
these units to achieve the certified AFUE in all positions.
i
i
2
i
i
SPECIFICATIONS
The furnace should be sized to provide t00 percent of the design method to calculate heating load estimates and select the furnace,
heating load requirement plus any margin that occurs because of Excessive oversizing of the furnace may cause [lie furnace and/or
furnace model size capacity increments. None of the furnace vent to fail prematurely,customer discomfort and/or vent freezing.
model sizes can be used if the heating load is 12,000 BTUH or Failure to follow these guidelines is considered faulty installation
lower. Use Air Conditioning Contractors of America (Manual J and/or misapplication of the furnace;and resulting failure,damage,
and S); American Society of Heating, Refrigerating, and or repairs may impact warranty coverage.
Air-Conditioning Engineers; or other approved engineering
Heating Capacity and Efficiency _ 24026 30040 36040 30060 42USO Y 48080 NOW ' 42100 60100 60120 6014
Input High
p Heat (BTUH) 26,000 40,000 40,000 60,000 60.000 80,000 80,000 100,000 100.000 120,000 140,000
Output High Heat (BTUH) 25,000 39,000 39,000 58.000 58,000 78,000 78.000 97,000 97,000 117,000 135,000
Certified Temperature 25-55 40-70 35-65 40-70 40-70 40-70 40-70 40-70 40-70 40-70 45-75
Rise Range OF(QC) High Heat (14-31) (22-39) (19-36) (22-39) (22-39) (22-39) (22-39) (22-39) (22-39) (22-39) (25-42)
Airflow Capacity and Blower Data 24026 30040 36040 30060 42060 46080 60080 42100 60100 60120 60140
Rated External Static Heating 0.10 0.10 0.10 0.12 0.12 0.15 0.15 0.20 0.20 0.20 0.20
Pressure(in.W.C.) Cooling 0.6 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0,5 0,5 0.5
Airflow Delivery High Heat 675 820 1000 840 980 1040 1695 1510 1680 2245 2175
@ Rated ESP(CFM) Cooling 775 905 i050 1130 1420 1600 1970 1545 2065 2105 2035
Cooling Capacity(tans) 400 CFM/tan 1.5 2 2.5 2.5 3.5 4 5 4 5 5 5
350CFM/ton 2 2.5 3 3 4 4.5 5.5 4.5 1 6 6 8
Direct-Drive Motor Type Permanent Split Capacitor(PSC)
Direct-Drive Motor HP 0.25 0.5 1 0.5 0.5 1 0.5 1 0.75 1 1 1 0.5 1 f 1 1
Motor Full Load Amps 2.0 1 6.2 1 6.8 6.2 1 6.8 1 7.9 1 13.8 6.5 1 13.8 14.1 14.1
RPM Range 600-1150
Speed Selections 4 4 1 5 4 5 1 5 1 5 4 b 5 -5-:::-
Blower Wheel DiaxWidlh in. 11x7 11x7 11x8 11x7 11x8 11x8 11x10 11x10 11x10 11x11 11x11
Air Filtration System Field Supplied
Filter Used for Cerlilted Wait Data* KGAWF"06UFR
Electrical f]ata,_ 24028 30040 1 36040 30060 142060_ 40080 1 60080 1 42100. 80100 801-b - 80140
Input Voltage Volts-Hertz-Phase 115-60-1
Operating Voltage Range Min-Max 104-127
Maximum Input Amps Amps 3.6 6.8 8.3 7.0 8.4 9.6 14.5 7A 14.6 14.9 14.9
UnitAmpacily Amps 5.4 9.5 11.4 9.7 11.5 13.0 19.1 10.4 19.2 '19.6 19.6
Minimum Wire Size AWG 14 14 14 14 14 14 12 14 12 12 12
Maximum Wre Length Fee[ 68 39 32 38 32 28 30 35 29 29
@ Minimum Wire Size (M) (20. (11.9) (9.8) _CI-1.6) _ (9,8) (8.5) (9.1) (10.7) (8.8) (8.8) (8.8)
Maximum Fuse/Ckt Bkr
(Time-Delay Type Recom- Amps 15 15 15 15 15 15 20 15 20 20 20
mended)
Transformer Capacity(24vac output) 40 VA
External Control Power Heating 27.9 VA -
Available Cooling 34.6 VA
Controls 240-6 30040 1 30040 1 30060 1 42080 1 48080. 60080 42100 1 60100 1 60120 60140
Gas Connection Size 1/2"-NPT
Burners(Monoporl) 2 2 2 I 3 3 q 4 =5 .I 5 6 7
Gas Valve(Redundant) Manufacturer Wlift Rogers
Minimum Inlet Gas pressure(in.W.C.) 4.5
Maximum Inlet Gas pressure(in:W.C.) 13.6
Ignitbn Device Silicon Nitride
Limit Control 220 1 165 1 180 1 165 1 180 1 170 1 200 1 180 180 160 165
Heating Blower Control(Heating Off-Delay) Ad(ustabie.,90,120,150,180 seconds
Cooling Blower Control(Time Delay Relay) 90 seconds
Communication System none
Thermostat Connections Com 24V,R.W,G.Y
Accessory Connections EAC(115vac);HUM(24vac)
See Accessory Liar for part numbers availlablia.
3
i
Permit#: 1161
Permit Date: 10/04/16
Permit Type: RESIDENTIAL MECHANICAL
Project Name: Craig Jacobsen
Applicant Name: Day and Nite Plumbing and Heating, Inc.
Applicant Address: 16614 13th Ave W
Applicant, City, State, Zip: Lynnwood, WA 9837
Contact: Bryan Radcliff
Phone: 425-775-6464
Email: bryan@dayandnite.net
Scope of Work: Replace Gas Furnace
Valuation: 4570.00
Square Feet: 0
Number of Stories: 0
Construction Type:
Occupancy Group:
ID Code:
Permit Issued: 10/05/2016
Permit Expires:
Form Permit Type:
Status: COMPLETE
Assigned To: Kristin Foster
Property
Parcel# Address Legal Description Owner Name Owner Phone Zoning
00560500000101 115 W HAZEL AVE JACOBSEN CRAIG 111 Single Family
A&LISA A Residence-Detached
Contractors
Contractor Primary Contact Phone Address Contractor Type License License#
Day&Nite Plumbing& 16614 13th Ave CONSTRUCTION Construction DAYNINP789D5
Heating,Inc Bryan Radcliff 425-775-6464 W CONTRACTOR Contractor
Fees
Fee Description Notes Amount
Forced Air Heat fee per Btu $25.00
Mechanical Base Permit Fee $25.00
Total $50.00
Attached Letters
Date Letter Description
10/05/2016 Building Permit
Payments
Date Paid By Description Payment Type Accepted By Amount
10/04/2016 Bruce Davis 61705240 cc $50.00
Outstanding Balance $0.00
Notes
Date Note Created By:
10/04/2016 Model#915SA42060517 AFUE 95.5 Kristin Foster
Uploaded Files
Date File Name
10/11/2016 1884955-115 W Hazel Ave.docx
10/05/2016 1876311-1161 Issued Permit.pdf
10/04/2016 1875110-1161 Application.pdf
10/04/2016 1875111-1161 Specs.pdf