Loading...
HomeMy WebLinkAbout17212 51st Ave Ne Ste 104_BLD6180_2025 Permit Packet Coversheet Community and Economic Development City of Arlington • 18204 59th Avenue NE • Arlington, WA 98223 • Phone (360) 403-3551 Page 1 of 1 Permit Number: Permit Type: Address/Parcel: Completed (Month/Year): Land Use ˆ Notice of Decision ˆ Staff Report ˆ Application ˆ Narrative ˆ Legal Description ˆ Vicinity Map ˆ Site Plan ˆ Landscape Plan ˆ Complete Streets Checklist ˆ Traffic Impact Analysis ˆ Snohomish County Traffic Mitigation Offer ˆ WSDOT Traffic Offer Form ˆ Tree Survey ˆ Stormwater Drainage Report ˆ Geotech Report ˆ Critical Area Evaluation Form ˆ SEPA Checklist ˆ Public Notice Material ˆ Noticing and Related Documents ˆ Water / Sewer Availability Certificate ˆ Unanticipated Discovery Plan Form ˆ Aerial Photo of Site ˆ Proposed Building Materials ˆ Lighting Plans and Lighting Cut Sheets ˆ Color Elevations ˆ Design Matrix ˆ Plat Map ˆ Title Report ˆ Lot Closures ˆ Preliminary Civil Plans ˆ Archaeological Survey o Confidential Documents. Contact the City to obtain. ˆ Topography (Existing Conditions) ˆ CC&R’s ˆ Deeds / Easements / Conveyances /Dedications ˆ Developer’s Agreement ˆ Recorded Copies ˆ Bonding or Assignment of Funds o Confidential Documents. Contact the City to obtain. ˆ Letters and Project Documents ˆ Other: Civil ˆ Issued Permit ˆ Application ˆ Other Applications ˆ Construction Calculation Worksheet ˆ Approved Plans ˆ Review Comment Form ˆ Letters and Project Documents ˆ Other Agency Permits ˆ Reports: o Drainage Report Pg: o Stormwater Pg: o Geotech Pg: o All Other Reports ˆ SEPA and Noticing Materials ˆ Inspections ˆ As-Builts ˆ Other: Building ˆ Issued Permit ˆ Application ˆ Additional Applications ˆ Approved Plans ˆ Site Plan ˆ Letters and Project Documents ˆ Calculations ˆ Project Specification Manuals ˆ Reports ˆ Certificate of Occupancy ˆ Inspections ˆ Other: BLD6180 Fire Sprinkler 17212 51st Ave Ne Ste 104 December 2024 ✔ ✔ ✔ ✔ ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT. 1.0 PRODUCT DESCRIPTION QUICK RESPONSE UPRIGHT SPRINKLERS SIN V2815 V4215 V2704 V3402 ORIENTATION UPRIGHT UPRIGHT UPRIGHT UPRIGHT K-FACTOR1 2.8 Imp./4.0 S.I.4.2 Imp./6.1 S.I.5.6 Imp./8.1 S.I.8.0 Imp./11.5 S.I. CONNECTION 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT/IGS 3/4" NPT/20mm BSPT/IGS MAX. WORKING PRESSURE 175 psi/1200 kPa 175 psi/1200 kPa 175 psi/1200 kPa cULus 250 psi /1725 kPa 175 psi/1200 kPa RE-DESIGNATION GL2815 GL4215 –– GLOBE EQUIVALENT ––GL5615 GL8118 QUICK RESPONSE PENDENT SPRINKLERS SIN V2801 V4201 V2708 V3406 ORIENTATION PENDENT PENDENT PENDENT PENDENT K-FACTOR1 2.8 Imp./4.0 S.I.4.2 Imp./6.1 S.I.5.6 Imp./8.1 S.I.8.0 Imp./11.5 S.I. CONNECTION 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT/IGS 3/4" NPT/20mm BSPT/IGS MAX. WORKING PRESSURE 175 psi /1200 kPa 175 psi /1200 kPa 175 psi /1200 kPa cULus 250 psi/1725 kPa 175 psi/1200 kPa RE-DESIGNATION GL2801 GL4201 –– GLOBE EQUIVALENT ––GL5601 GL8101 QUICK RESPONSE RECESSED PENDENT SPRINKLERS SIN V2801 V4201 V2708 V3406 ORIENTATION PENDENT PENDENT PENDENT PENDENT K-FACTOR1 2.8 Imp./4.0 S.I.4.2 Imp./6.1 S.I.5.6 Imp./8.1 S.I.8.0 Imp./11.5 S.I. CONNECTION 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT/IGS 3/4" NPT/20mm BSPT/IGS MAX. WORKING PRESSURE 175 psi/1200 kPa 175 psi/1200 kPa 175 psi/1200 kPa cULus 250 psi/1725 kPa 175 psi/1200 kPa ESCUTCHEON Recessed Recessed Recessed Recessed RE-DESIGNATION GL2801 GL4201 –– GLOBE EQUIVALENT ––GL5601 GL8101 AVAILABLE GUARDS/SHIELDS SPRINKLER V28 V42 V27 V34 Upright ■■ Pendent ■■ AVAILABLE WRENCHES SPRINKLER V56-2 Recessed V56 Open End V27-2 Recessed V27 Open End V34-2 Recessed V34 Open End 3/16 Hex-Bit V2815 and V4215 ■ V2707 and V2704 ■■ V3402 ■■ V2801, and V4201 ■■ V2706 and V2708 ■■■ V3406 ■■■ 1 For K-Factor when pressure is measured in Bar, multiply S.I. units by 10.0. Factory Hydrostatic Test: 100% @ 500 psi/3447 kPa/34 Bar Min. Operating Pressure: UL/FM: 7 psi/48 kPa/.5 Bar VdS: 5 psi/35 kPa/.35 Bar (Upright only) Temperature Rating: See tables in section 2.0 Victaulic® FireLock™ Series FL-QR Standard Coverage, Quick Response Upright, Pendent and Recessed Pendent Sprinklers K2.8 (4.0), K4.2 (6.1), K5.6 (8.1), K8.0 (11.5)41.01 1 victaulic.com 41.01 16343 Rev E Updated 08/2024 © 2024 Victaulic Company. All rights reserved. 2.0 CERTIFICATIONS/LISTINGS 0786 0832 UPRIGHT APPROVALS/LISTINGS SIN V2815 V4215 V2704 V3402 Nominal K Factor Imperial 2.8 4.2 5.6 8.0 Nominal K Factor S.I.2 4.0 6.1 8.1 11.5 Orientation UPRIGHT UPRIGHT UPRIGHT UPRIGHT Approved Temperature Ratings F°/C° cULus 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C FM –– 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C LPCB/UKCA –– 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C VdS/CE –– 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C CCC K-ZSTZ –– 155°F/68°C 175°F/79°C 286°F/141°C 155°F/68°C 286°F/141°C 2 For K-Factor when pressure is measured in Bar, multiply S.I. units by 10. PENDENT APPROVALS/LISTINGS SIN V2801 V4201 V2708 V3406 Nominal K Factor Imperial 2.8 4.2 5.6 8.0 Nominal K Factor S.I.2 4.0 6.1 8.1 11.5 Orientation PENDENT PENDENT PENDENT PENDENT Escutcheon Flush/Extended Flush/Extended Flush/Extended Flush/Extended Approved Temperature Ratings F°/C° cULus 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C FM –– 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C CCC K-ZSTX –– 155°F/68°C 200°F/93°C 286°F/141°C 155°F/68°C 286°F/141°C 2 For K-Factor when pressure is measured in Bar, multiply S.I. units by 10. NOTES • Reference the specific agency website listings for the most up-to-date certification information. • Where cULus Listed, Polyester and VC-250 Coatings Listed as Corrosion Resistant (V3402 with VC-250 Only) • Where FM Approved, VC-250 Coating Approved as Corrosion Resistant • New York City Acceptance - All UL Listed and/or FM Approved sprinklers acceptable to NYC per section 28-113 of the Administrative Code and the OTCR Rule. 2 victaulic.com 41.01 16343 Rev E Updated 08/2024 © 2024 Victaulic Company. All rights reserved. victaulic.com 2.0 CERTIFICATIONS/LISTINGS (CONTINUED) RECESSED PENDENT APPROVALS/LISTINGS SIN V2801 V4201 V2708 V3406 Nominal K Factor Imperial 2.8 4.2 5.6 8.0 Nominal K Factor S.I.2 4.0 6.1 8.1 11.5 Orientation PENDENT PENDENT PENDENT PENDENT Escutcheon Recessed Recessed Recessed Recessed Approved Temperature Ratings F°/C° cULus 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C FM WITH 1/2" ADJUSTMENT ESCUTCHEON ONLY –– 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C CCC K-ZSTX –– 155°F/68°C 200°F/93°C 286°F/141°C 155°F/68°C 286°F/141°C 2 For K-Factor when pressure is measured in Bar, multiply S.I. units by 10. NOTES • Reference the specific agency website listings for the most up-to-date certification information. • Where cULus Listed, Polyester and VC-250 Coatings Listed as Corrosion Resistant (V3402 with VC-250 Only) • Where FM Approved, VC-250 Coating Approved as Corrosion Resistant • New York City Acceptance - All UL Listed and/or FM Approved sprinklers acceptable to NYC per section 28-113 of the Administrative Code and the OTCR Rule. 3 victaulic.com 41.01 16343 Rev E Updated 08/2024 © 2024 Victaulic Company. All rights reserved. victaulic.com 3.0 SPECIFICATIONS – MATERIAL Deflector: Bronze Bulb Nominal Diameter: 3.0 mm Load Screw: Bronze Pip Cap: Bronze Spring Seal: PTFE coated Beryllium nickel alloy Frame: Brass Lodgement Spring: Stainless steel Installation Wrench: Ductile iron Sprinkler Frame Finishes: • Plain brass • Chrome plated • White polyester painted3, 4 • Flat black polyester painted3, 4 • Custom polyester painted3, 4 • VC-2505 3 Not available on the Intermediate Level Style Pendent. 4 UL Listed for corrosion resistance. 5 UL Listed and FM Approved for corrosion resistance. NOTE • For cabinets and other accessories, refer to separate sheet. 1⁄"/ 33 mm 2½"/ 63 mm Nominal make-in Frame Bulb Load screw Deector Lodgement spring Pip cap and spring seal 1⁄"/ 37 mm 2½"/ 63 mm ½"/13 mm Nominal make-in Frame Bulb Load screw Deector Lodgement spring Pip cap and spring seal 1¼"/ 31 mm 2⁄"/ 58 mm ⁄"/11 mm Nominal make-in Frame Bulb Load screw Deector Lodgement spring Pip cap and spring seal 1⁄"/ 40 mm 2¼"/ 57 mm ⁄"/11 mm Nominal make-in Frame Bulb Load screw Deector Lodgement spring Pip cap and spring seal 1"/ 2⁄"/ 60 mm Nominal make-in Frame Bulb Load screw Deector Lodgement spring Pip cap and spring seal 1⁄"/ 37 mm 2⁄"/ 60 mm ⁄"/11 mm Frame Bulb Load screw Deector Lodgement spring Pip cap and spring seal 4 victaulic.com 41.01 16343 Rev E Updated 08/2024 © 2024 Victaulic Company. All rights reserved. victaulic.com 4.0 DIMENSIONS 2⁄"/75 mm 2⁄"/60 mm 2"/51 mm Hole in ceiling Finished surface Typical ceiling ⁄"/22 mm Max. (¾" Adj.) ⁄"/16 mm Max. (½" Adj.) ⁄"/3 mm Min. 1⁄"/29 mm Min. (¾" Adj.) 1⁄"/34 mm Min. (½" Adj.) 1⁄"/47 mm Max. 2⁄"/75 mm 2⁄"/60 mm 2"/51 mm Hole in ceiling Finished surface Typical ceiling ⁄"/22 mm Max. (¾" Adj.) ⁄"/16 mm Max. (½" Adj.) ⁄"/3 mm Min. 1⁄"/47 mm Max 1⁄"/29 mm Min. (¾" Adj.) 1⁄"/34 mm Min. (½" Adj.). 2⁄"/75 mm 2⁄"/60 mm 2"/51 mm Hole in ceiling Finished surface Typical ceiling 1"/25 mm Max. (¾" Adj.) ¾"/19 mm Max. (½" Adj.) ¼"/6 mm Min. 1⁄"/30 mm Min. (½" Adj.) ⁄"/24 mm Min. (¾" Adj.) 1⁄"/43 mm Max. 5 victaulic.com 41.01 16343 Rev E Updated 08/2024 © 2024 Victaulic Company. All rights reserved. victaulic.com 5.0 PERFORMANCE Sprinkler systems are to be designed to and installed per NFPA, FM Datasheets, and any local standards. 6.0 NOTIFICATIONS WARNING • Read and understand all instructions before attempting to install any Victaulic products. • Always verify that the piping system has been completely depressurized and drained immediately prior to installation, removal, adjustment, or maintenance of any Victaulic products. • Wear safety glasses, hardhat, and foot protection. Failure to follow these instructions could result in death or serious personal injury and property damage. • These products shall be used only in fire protection systems that are designed and installed in accordance with current, applicable National Fire Protection Association (NFPA) standards, or equivalent standards, and in accordance with applicable building and fire codes. These standards and codes contain important information regarding protection of systems from freezing temperatures, corrosion, mechanical damage, etc. • The installer shall understand the use of this product and why it was specified for the particular application. • The installer shall understand common industry safety standards and potential consequences of improper product installation. • It is the system designer's responsibility to verify suitability of materials for use with the intended fluid media within the piping system and external environment. • The material specifier shall evaluate the effect of chemical composition, pH level, operating temperature, chloride level, oxygen level, and flow rate on materials to confirm system life will be acceptable for the intended service. Failure to follow installation requirements and local and national codes and standards could compromise system integrity or cause system failure, resulting in death or serious personal injury and property damage. 7.0 REFERENCE MATERIALS Ratings: All glass bulbs are rated for temperatures from -67°F/-55°C. I-40: Victaulic FireLock™ Automatic Sprinklers Installation and Maintenance Instructions I-V9: Style V9 Victaulic FireLock™ IGS™ Installation-Ready™ Sprinkler Coupling Installation Instructions 6 victaulic.com 41.01 16343 Rev E Updated 08/2024 © 2024 Victaulic Company. All rights reserved. victaulic.com User Responsibility for Product Selection and Suitability Each user bears final responsibility for determining the suitability of Victaulic products for their end-use application, in accordance with industry standards, project specifica- tions, and Victaulic’s published performance, maintenance, and safety data, as well as all warnings and installation instructions. Nothing in this or any other document, nor any verbal recommendation, advice, or opinion from any Victaulic employee, shall be deemed to alter, vary, supersede, or waive any provision of Victaulic Company’s standard conditions of sale, warranty, installation instructions, or this disclaimer. Installation Always refer to and follow the Victaulic Installation Handbook or installation instructions for the product you are installing. Handbooks are included with each shipment of Victaulic products, providing complete installation and assembly data, and are available in PDF format on our website at victaulic.com. Warranty Refer to the Warranty section of the current Price List or contact Victaulic for details. Intellectual Property Rights No statement concerning the use of any material, product, service, or design is intended, or should be construed, to grant any license under any patent or other intellectual property right of Victaulic or any of its affiliates, or as a recommendation for the use of such material, product, service, or design in the infringement of any patent or other intellectual property right. The terms “Patented” or “Patent Pending” refer to design or utility patents or patent applications for articles and/or methods of use in the United States and/or other countries. Victaulic and all other Victaulic marks are the trademarks or registered trademarks of Victaulic Company, and/or its affiliated entities, in the U.S. and/or other countries. Note All products bearing a Victaulic trademark are manufactured by Victaulic or to Victaulic specifications. All products are to be installed only in accordance with the applicable Victaulic installation instructions. Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations.