Loading...
HomeMy WebLinkAbout4820 Longhouse Trail Lane Ne Ste 103_BLD6592_2025 CITY OF ARLINGTON 18204 59th Avenue NE, Arlington, WA 98223 INSPECTIONS: 360-403-3417 - Permit Center: 360-403-3551 BUILDING PERMIT 4820 LONGHOUSE TRAIL LANE NE STE 103 Permit #: 6592 PERMIT EXPIRES 180 DAYS AFTER Parcel #: 31052800102400 DATE OF ISSUANCE. Scope of Work: Modification of the fire sprinkler system Valuation: 3865.00 OWNER APPLICANT CONTRACTOR ARLINGTON 51ST ST LLC Commercial Fire Protection Commercial Fire Protection, Inc PO BOX 619 Commercial Fire Protection 17199 Bennett Rd SEDRO WOOLLEY, WA 98284 98273 Mount Vernon, WA 98273 +13608489093 360-848-9093 LIC: 601 011 373 EXP: 03/31/2026 LIC: COMMEFP132MMEXP: 08/16/2026 MECHANICAL CONTRACTOR PLUMBING CONTRACTOR LIC #: EXP: LIC #: EXP: JOB DESCRIPTION PERMIT TYPE: FIRE SPRINKLER CODE YEAR: 2021 STORIES: 1 CONST. TYPE: VA DWELLING UNITS: OCC GROUP: A-3; Assembly BUILDINGS: OCC LOAD: PERMIT APPROVAL The issuance or granting of this permit shall not be construed to be a permit for, or approval of, any violation of this Code or any other ordinance or order of the City, of any state or federal law, or of any order, proclamation, guidance advice or decision of the Governor of this State. To the extent the issuance or granting of this permit is interpreted to allow construction activity during any period of time when such construction is prohibited or restricted by any state or federal law, or order, proclamation, guidance advice or decision of the Governor of this State, this permit shall not authorize such work and shall not be valid. The building official is authorized to prevent occupancy or use of a structure where in violation of this Code, any other City ordinances of this jurisdiction or any other ordinance or executive order of the City, or of any state or federal law, or of any order, proclamation, guidance advice or decision of the Governor. The building official is authorized to suspend or revoke this permit if it is determined to be issued in error or on the basis of incorrect, inaccurate or incomplete information, or in violation of any City ordinance, regulation or order, state or federal law, or any order, proclamation, guidance or decision of the Governor. I AGREE TO COMPLY WITH CITY AND STATE LAWS REGULATING CONSTRUCTION AND IN DOING THE WORK AUTHORIZED THEREBY; NO PERSON WILL BE EMPLOYED IN VIOLATION OF THE LABOR CODE OF THE STATE OF WASHINGTON RELATING TO WORKMEN'S COMPENSATION INSURANCE AND RCW 18.27. THIS APPLICATION IS NOT A PERMIT UNTIL SIGNED BY THE BUILDING OFFICIAL OR HIS/HER DEPUTY AND ALL FEES ARE PAID. IT IS UNLAWFUL TO USE OR OCCUPY A BUILDING OR STRUCTURE UNTIL A FINAL INSPECTION HAS BEEN MADE AND APPROVAL OR A CERTIFICATE OF OCCUPANCY HAS BEEN GRANTED. IBC110/IRC110. SALES TAX NOTICE: Sales tax relating to construction and construction materials in the City of Arlington must be reported on your sales tax return form and coded City of Arlington #3101. Della Dellinger 07/08/2025 Applicant Signature Date Building Official Date CONDITIONS Adhere to approved plans. Permit shall be onsite for inspection. Call for inspentions. The property owner shall ensure that the construction project complies with all applicable zoning codes and regulations. The property owner shall also ensure that the construction project does not cause any adverse impact on the surrounding environment or community. The property owner shall be responsible for obtaining all necessary permits and approvals from the relevant authorities before commencing construction. The property owner shall ensure that the construction project complies with all applicable design review requirements. THIS PERMIT AUTHORIZES ONLY THE WORK NOTED. THIS PERMIT COVERS WORK TO BE DONE ON PRIVATE PROPERTY ONLY. ANY CONSTRUCTION ON THE PUBLIC DOMAIN (CURBS, SIDEWALKS, DRIVEWAYS, MARQUEES, ETC.) WILL REQUIRE SEPARATE PERMISSION. PERMIT FEES Date Description Fee Amount 07/08/2025 Web Only - Fire System Plan Review $200.00 07/08/2025 Processing/Technology $25.00 07/08/2025 Fire Sprinkler System $175.00 Total Due: $400.00 Total Payment: $400.00 Balance Due: $0.00 CALL FOR INSPECTIONS Call by 3:30 pm for next day inspection, allow 48 hours for Fire Inspections When calling for an inspection please leave the following information: Permit Number, Type of Inspection being requested, and whether you prefer morning or afternoon INSPECTION INFORMATION Pass/Fail FIRE SPRINKLER PERMIT APPLICATION Community and Economic Development City of Arlington • 18204 59th Ave NE • Arlington, WA 98223 • Phone (360) 403-3551 Type of Permit:  New Installation  System Modification  Phased Installation Property Address: Suite No.: Project Valuation: Lot #: Parcel ID No.: Preferred Contact:  Owner  Applicant Contractor Project Description: Owner Name: Phone No.: Email Address: Cell No.: Mailing Address: City: State: Zip: Applicant Name: Phone No.: Email Address: Cell No.: Mailing Address: City: State: Zip: Contractor Name: Office No.: Email Address: Cell No.: Mailing Address: City: State: Zip: L&I Contractor License Number: Expiration Date: SUBMITTAL REQUIREMENTS: Provide Information on All Equipment to be Installed Prior to Installation ELECTRONIC FILES OF THE FOLLOW:  Complete and Scaled Plans  Hydraulic Calculations  Equipment Specifications for Each Fire Sprinkler Permit Application  Specification Sheets  Wiring Diagrams (Point to Point Wiring)  Electrical Plans, if applicable FIRE SPRINKLER SYSTEMS (105.7.1, 105.7.4, 105.7.11) ** DEVICES include separate individual portions of a Fire Sprinkler System such as: Sprinklers Heads, Risers, Valves, Pull Stations, and other such devices. (Each piece is one device) PLAN REVIEW FEES Less than $5,000.00 = $100.00 $5,000.00 & over – based on project valuation (Plan Review Fee is 65% of project valuation as calculated per Table 4-1) REV11.2020 Page 1 of 3 REINSPECTION / PHASED INSTALLATION INSPECTIONS Submit Phasing Plan with Application – review and approval required REINSPECTION FEES SHALL BE PAID PRIOR TO INSPECTION FEE Reinspection/Phased Installation fee is charged per hour (1 hour minimum) $75.00 Hydrostatic Pressure Test (1 test included per permit) $150.00 Cover Inspection (1 cover inspection included per permit) $75.00 Fire Pump (1 fire pump inspection per permit) inspection requires 2 hours $150.00  TENANT IMPROVEMENT OR SYSTEM MODIFICATION (NFPA 13/13R) Number of Devices** Device Fee Subtotal 1 to 2 $ 75.00 = $ 3 to 5 $125.00 = $ 6 to 10 $175.00 = $ 11 to 20 $225.00 = $ 21 to 40 $300.00 = $ 41 to 100 $375.00 = $ 101 to 200 $475.00 = $ 201 to 300 $575.00 = $ > 300 $600.00 plus $50.00 per 100 additional devices (round up) Total Number of Devices = $600.00 + $ = $ Hydraulically Designed Systems Yes  / No  Yes = Permit Fee x 2 $ PERMIT FEE SUBTOTAL $  NEW COMMERCIAL SYSTEM (NFPA 13/13R) Number of Devices** Device Fee Subtotal 1 to 100 $375.00 = $ 101 to 200 $475.00 = $ 201 to 300 $600.00 = $ > 300 $625.00 plus $50.00 per 100 additional devices (round up) Total Number of Devices = $625.00 + $ = $ Hydraulically Designed Systems Yes  / No  Yes = Permit Fee x 2 $ PERMIT FEE SUBTOTAL $  RESIDENTIAL (NFPA 13D) Number of Devices** Device Fee Subtotal 1 to 10 $175.00 = $ 11 to 25 $225.00 = $ 26 + $275.00 = $ * NFPA 13D SYSTEM INSTALLED (NOT REQUIRED) Permit Fee Reduced 50% = $ PERMIT FEE SUBTOTAL $ REV2022 Page 2 of 3  HOOD SUPPRESSION SYSTEM Type of System No. of Units Cost per Unit Subtotal Pre-Engineered x $200.00 = $ Custom Engineered x $275.00 = $ PERMIT FEE SUBTOTAL $  STANDPIPE SYSTEM Type of Standpipe No. of Units Cost per Unit Subtotal Class I – new or existing x $150.00 = $ Class II – new or existing x $150.00 = $ PERMIT FEE SUBTOTAL $  FIRE PUMP Fire Pump x $300.00 each = $ PERMIT FEE SUBTOTAL $  SPRAY BOOTHS (105.7) & INDUSTRIAL OVENS (105.7.7) NOTE: SEPARATE SPRINKLER PERMIT REQUIRED Type of Booth No. of Units Cost per Unit Subtotal Pre-Engineered w/documents x $150.00 = $ Site-built or used w/o documents x $250.00 = $ Industrial Oven x $250.00 = $ PERMIT FEE SUBTOTAL $ Plan review fee due at time of submittal TOTAL PERMIT FEE $ PLAN REVIEW FEE $ Processing/Technology Fee $25.00 TOTAL $ I hereby certify that I am the Owner, Applicant, Contractor, and authorized to sign this application and that the above information is correct and construction on, and the occupancy and the use of the above-described property will be in accordance with the laws, rules and regulation of the State of Washington, and the City of Arlington. Della Dellinger Signature Print Name Date REV2022 Page 3 of 3 Availability: Americas Bulletin 213 May 2021 RASCOFLEX® Sprinkler Connections cULus Listed, FM Approved Product Description RASCOFLEX® Sprinkler Connections are intended to connect a branch line to a sprinkler using a flexible stainless steel hose assembly. RASCOFLEX® Sprinkler Connections are suitable for use in suspended and hard ceiling applications such as T-Bar ceiling grids, wood, metal stud, or hat furring channel hard lid ceilings. Every package contains one (1) fully assembled stainless steel flexible sprinkler system complete with hose, branch line connection, and sprinkler connection, as well as the pre- assembled bracket assembly to attach to the ceiling. RASCOFLEX® Sprinkler Connections are designed for use in hydraulically calculated wet, preaction, or dry sprinkler systems per NFPA 13, 13R, 13D, and FM Global Loss Prevention Data Sheets. Technical Data Table A RASCOFLEX® Sprinkler Connections FM: 200 psi (13.8 bar) Maximum Working Pressure UL: 175 psi (12.1 bar) Ordering Information Maximum Working Temperature 300°F (149°C) Specify: Inlet/Branch Line 1” NPT Connections Outlet/Reducer 1/2” or 3/4” NPT Model Name • Model RFB Minimum Allowable UL: 3” (76 mm) Bending Radius FM: 7” (178 mm) Nominal Hose Length Maximum Number of Bends See Friction Loss Chart • 24” (610 mm) • 31” (790 mm) Maximum 1/2” Outlet 5.6 (80 metric) • 40” (1015 mm) K-Factor 3/4” Outlet 14.0 (200 metric) • 48” (1220 mm) • 60” 1525 mm) • 72” (1830 mm) Maintenance Reducer Outlet: 1/2” NPT or 3/4” NPT RASCOFLEX® Sprinkler Connections should be inspected and the sprinkler system maintained in accordance with NFPA 25, as Reducer Type well as the requirements of any Authorities Having Jurisdiction. Standard: • 6-1/8” (155 mm) straight Optional: Patents • 4-5/16” (110 mm) straight • 5-5/16” (135 mm) straight RASCOFLEX® Sprinkler Connections may be covered by • 11-3/4” (300 mm) straight one or more of the following US Patent Nos. 10,173,088 and • 5-5/8” (143 mm) elbow 10,328,296. • 7-3/8” (187 mm) elbow Listings and Approvals Bracket Assembly Length • 24” (610 mm) standard FM Approved Class No. 1637 (FM) • 48” (1220 mm) optional UL Listed and UL Certified for Canada to ANSI/UL 2443 (cULus) Accessories • See Table F www.reliablesprinkler.com Bracket Dimensions Figure 1 Reducer Dimensions Figure 2 Bulletin 213 Page 2 of 8 May 2021 www.reliablesprinkler.com Installation Dimensions Figure 3 Minimum and Maximum Face of Fitting to Bottom of Ceiling Grid for Each Reducer Table B 6-1/8” 4-5/16” 5-5/16” 11-13/16” 5-5/8” 7-3/8” (155mm) Fitting Distance (110mm) (135mm) (300mm) (143mm) (187mm) Straight Straight Straight Straight Elbow Elbow Standard Max. Face of Fitting 3” (7mm) Distance Above 3” (77mm) 3” (7mm) 3” (7mm) 3” (7mm) 3” (7mm) Bottom of Ceiling Grid Max. Face of Fitting 1/8” (3mm) 1-5/8” (42mm) 11/16” (17mm) 6-3/8” (148mm) 1-7/16” (36mm) 5/16” (60mm) Distance from Bottom below above above below above below of Ceiling Grid Note: Based on 1-11/16” (43mm) tall ceiling grid. Fig. 3 Dimension C - Clearance Above Ceiling Required at Max. Sprinkler Recess Table C Recessed Escutcheon or Reducer Concealed/Flush Sprinkler 5-5/8” (143mm) Elbow 7-3/8” (187mm) Elbow F1 recessed escutcheon NC 5-5/8” (144mm) F2 or FV recessed escutcheon NC 5-3/8” (138mm) FP recessed escutcheon NC 6-1/4” (160mm) CCP conical concealed cover plate NC 6-1/4” (160mm) G4 series concealed sprinklers 5-5/8” (144mm) 7-3/8” (188mm) G5 series concealed sprinklers 5-1/4” (134mm) 7” (179mm) RFC series concealed sprinklers 5-1/4” (134mm) 7” (179mm) XL commercial flush sprinkler with flat escutcheon 4-7/8” (125mm) 6-5/8” (169mm) XL commercial flush sprinkler with conical escutcheon 4-3/8” (112mm) 6-1/8” (157mm) Note: NC - Reducer not compatible with sprinkler adjustment range. Based on 1-11/16” (43mm) tall ceiling grid and flush ceiling tile. Bulletin 213 Page 3 of 8 May 2021 www.reliablesprinkler.com Materials Figure 4 Number Item Description Material 1 Flexible Hose/Bellow AISI Type 304 Stainless Steel 5 7 1 2 Isolation Ring Nylon 66 3 Gasket EPDM 8 4 Nut Zinc Plated Carbon Steel 2 5 Branch Line Nipple (1”) Zinc Plated Carbon Steel 6 Reducer Zinc Plated Carbon Steel 3 7 Braid AISI Type 304 Stainless Steel 4 8 Welded Collar Fitting AISI Type 304 Stainless Steel - Bar Stock Zinc Plated SGCC Steel 6 - Brackets: Center and Side Zinc Plated SPCC Steel Flexible Hose Number of Bends Figure 5 One Bend Two Bends Three Bends Minimum bend radius 2x 2x Min Min bend bend radius radius OR OR Minimum bend radius Minimum 90° bend radius Minimum Minimum bend radius Minimum bend radius bend radius Minimum bend radius Do NOT install the RASCOFLEX™ straight. Some flexibility in the form of an allowable bend (or bends) must be provided. Bulletin 213 Page 4 of 8 May 2021 www.reliablesprinkler.com CAMERA-READY LOGOTYPE FOR TYPE L AND TYPE R LISTING MARKS FOR CANADA AND THE U.S. These Marks are registered by Underwriters Laboratories Inc. cULus Friction Loss Data Table D Maximum Maximum Nominal Reducer Equivalent Length Sprinkler Number of Length of Flexible of 1” (33.7mm) K-Factor 90° Bends at 3” Hose Sch. 40 Pipe gpm/psi1/2 (76mm) in (mm) NPT Threads Type (C=120), ft (m) (lpm/bar1/2) Bend Radius 24 1/2 Straight 5.6 (80) 2 10 (3) (610) 3/4 Straight 14.0 (200) 2 13 (4) 31 1/2 Straight 5.6 (80) 3 14 (4.3) (790) 3/4 Straight 14.0 (200) 3 16 (4.9) 40 1/2 Straight 5.6 (80) 4 21 (6.4) (1015) 3/4 Straight 14.0 (200) 4 23 (7) 48 1/2 Straight 5.6 (80) 4 24 (7.3) The minimum height of the registered trademark symbol ® shall be 3/64 of an inch(1220) . When the overall diameter of the UL Mark is less than 3/8 of an inch, the trademark symbol may be omitted if it is 3/4 not legible to the naked eye.Straight 14.0 (200) 4 26 (7.9) The font for all letter forms is Helvetica Condensed Black, except for the trademark symbol ®, which is Helvetica Condensed Medium. No other fonts are acceptable.60 1/2 Straight 5.6 (80) 4 25 (7.6) Please Note: (1525) The word "MARINE" should only be used for UL Classified marine products.3/4 Straight 14.0 (200) 4 30 (9.1) 200-195F 20M/11/97 72 1/2 Straight 5.6 (80) 5 36 (11) (1830) 3/4 Straight 14.0 (200) 5 33 (10.1) UL Notes: 1. Available data for use with 6.1” straight reducers. 2. Sprinkler K-Factor: 5.6 (80 metric) for 1/2-inch reducer and 14.0 (200 metric) for 3/4-inch reducer. 3. RASCOFLEX® Sprinkler Connections have been tested and approved by Underwriter’s Laboratories, Inc. for use in wet, preaction, and dry sprinkler systems per NFPA 13, 13D, 13R and UL2443. Bulletin 213 Page 5 of 8 May 2021 www.reliablesprinkler.com FM Friction Loss Data Table E Maximum Maximum Nominal Reducer Equivalent Length Sprinkler Number of Length of Flexible of 1” (33.7mm) K-Factor 90° Bends at 7” Hose Sch. 40 Pipe gpm/psi1/2 178mm) in (mm) NPT Threads Type (C=120), ft (m) (lpm/bar1/2) Bend Radius 1/2 Straight 5.6 (80) 1 9.7 (2.9) 1/2 90° Elbow 5.6 (80) 0 11.5 (3.5) 8.0 (115) 1 9.9 (3) 24 3/4 Straight 11.2 (160) 1 9.8 (2.9) (610) 14.0 (200) 1 9.6 (2.9) 8.0 (115) 0 10.2 (3.1) 3/4 90° Elbow 11.2 (160) 0 10 (3) 14.0 (200) 0 9.8 (2.9) 1/2 Straight 5.6 (80) 2 12.4 (3.8) 1/2 90° Elbow 5.6 (80) 2 15.8 (4.8) 8.0 (115) 2 13.7 (4.1) 31 3/4 Straight 11.2 (160) 2 12.9 (3.9) (790) 14.0 (200) 2 12.2 (3.7) 8.0 (115) 2 14.5 (4.4) 3/4 90° Elbow 11.2 (160) 2 13.7 (4.1) 14.0 (200) 2 13 (3.9) 1/2 Straight 5.6 (80) 2 15.9 (4.8) 1/2 90° Elbow 5.6 (80) 2 21.6 (6.6) 8.0 (115) 2 18.5 (5.6) 40 3/4 Straight 11.2 (160) 2 17.4 (5.3) (1015) 14.0 (200) 2 16.3 (4.9) 8.0 (115) 2 20 (6) 3/4 90° Elbow 11.2 (160) 2 18.9 (5.7) 14.0 (200) 2 20 (6) 1/2 Straight 5.6 (80) 3 19.0 (5.8) 1/2 90° Elbow 5.6 (80) 3 25.9 (7.9) 8.0 (115) 3 22.7 (6.9) 48 3/4 Straight 11.2 (160) 3 21.5 (6.5) (1220) 14.0 (200) 3 20.5 (6.2) 8.0 (115) 3 24.8 (7.5) 3/4 90° Elbow 11.2 (160) 3 23.6 (7.2) 14.0 (200) 3 22.6 (6.8) Bulletin 213 Page 6 of 8 May 2021 www.reliablesprinkler.com FM Friction Loss Data (cont.) Table E Maximum Maximum Nominal Reducer Equivalent Length Sprinkler Number of Length of Flexible of 1” (33.7mm) K-Factor 90° Bends at 7” Hose Sch. 40 Pipe gpm/psi1/2 (178mm) in (mm) NPT Threads Type (C=120), ft (m) (lpm/bar1/2) Bend Radius 1/2 Straight 5.6 (80) 4 23.7 (7.2) 1/2 90° Elbow 5.6 (80) 4 33.1 (10) 8.0 (115) 4 29.1 (8.8) 60 3/4 Straight 11.2 (160) 4 28 (8.5) (1525) 14.0 (200) 4 27 (8.2) 8.0 (115) 4 32.2 (9.8) 3/4 90° Elbow 11.2 (160) 4 31.1 (9.5) 14.0 (200) 4 30 (9.1) 1/2 Straight 5.6 (80) 4 28.4 (8.6) 1/2 90° Elbow 5.6 (80) 4 40.4 (12.3) 8.0 (115) 4 35.5 (10.8) 72 3/4 Straight 11.2 (160) 4 34.3 (10.4) (1830) 14.0 (200) 4 33.2 (10.1) 8.0 (115) 4 39.5 (12) 3/4 90° Elbow 11.2 (160) 4 38.3 (11.6) 14.0 (200) 4 37.2 (11.3) FM Notes: 1. RASCOFLEX® Sprinkler Connections have been tested and approved by FM Approvals for use in wet, preaction, and dry sprinkler systems per FM data sheets 2-0, 2-5, and 2-8 per FM1637. 2. Maximum sprinkler K-Factor: 5.6 (80 metric) for 1/2-inch reducer and 14.0 (200 metric) for 3/4-inch reducer. 3. Differences in equivalent lengths are due to varying test methods, per FM 1637 standards. 4. Above data of friction loss for use with 6.1” straight reducers. Bulletin 213 Page 7 of 8 May 2021 www.reliablesprinkler.com Accessories List Table F 5-5/8” (143mm) 7-3/8” (187mm) 4-5/16” (110mm) Elbow Reducer- Elbow Reducer- Straight Reducer Short Long 1/2”: 7M99003306 1/2”: 7M99003303 1/2”: 7M99003302 3/4”: 7M99003325 3/4”: 7M99003305 3/4”: 7M99003304 Replacement 5-5/16” (135mm) 6-1/8” (155mm) 11-13/16” (300mm) Straight Reducer Standard Straight Straight Reducer Reducer 1/2”: 7M99003307 1/2”: 7M99003309 3/4”: 7M99003326 1/2”: 7M99003308 3/4”: 7M99003328 3/4”: 7M99003327 Hat Channel End Hat Channel End Metal Stud End Bracket- Short Bracket- Long Bracket-Short 1-1/2” 3” (76mm) 3-3/4” (95mm) (38mm) 7M99003310 7M99003311 7M99003312 Metal Stud End T-Bar End Bracket- T-Bar End Bracket- Bracket- Long Short 2-5/8” (68mm) Long 4-1/8” (105mm) 2-1/16” (53mm) 7M99003314 7M99003316 7M99003313 Wood Beam Stud 3” (76 mm) Replacement End Bracket Bend Radius Center Bracket 7M99003317 Indicator 7M99003321 7M99004179 Replacement Replacement Gasket #2 Square Drive Bit 1” NPT Inlet Adapter 7M99004319 7M99004539 7M99003322 48” (1220mm) Bracket Assembly 7M99003301 Bulletin 213 Page 8 of 8 May 2021 www.reliablesprinkler.com P/N 9999970560 Permit #: 6592 Permit Date: 06/30/25 Permit Type: FIRE SPRINKLER Project Name: Hang Time Cafe Applicant Name: Commercial Fire Protection Applicant Address: Commercial Fire Protection Applicant, City, State, Zip: 98273 Contact: Della Dellinger Phone: +13608489093 Email: della@cfirepro.com Scope of Work: Modification of the fire sprinkler system Valuation: 3865.00 Square Feet: 2562 Number of Stories: 1 Construction Type: VA Occupancy Group: A-3; Assembly ID Code: Permit Issued: 07/08/2025 Permit Expires: 01/07/2026 Form Permit Type: FIRE SPRINKLER Status: COMPLETE Assigned To: Hannah Hardwick Property Parcel # Address Legal Description Owner Name Owner Phone Zoning 4820 LONGHOUSE TRAIL ARLINGTON 51ST 126 MULTI- 31052800102400 BSP LANE NE STE 103 ST LLC FAMILY MKT Contractors Contractor Primary Contact Phone Address Contractor Type License License # Commercial Fire CONSTRUCTION Della L Dellinger 360-848-9093 17199 Bennett Rd COA 601 011 373 Protection, Inc CONTRACTOR Commercial Fire CONSTRUCTION Labor & Della L Dellinger 360-848-9093 17199 Bennett Rd COMMEFP132MM Protection, Inc CONTRACTOR Industries Inspections Date Inspection Type Description Scheduled Date Completed Date Inspector Status Scheduled for 1pm FA00. FIRE ALARM 10/29/2025 10/30/2025 10/30/2025 BUILDING Approved FINAL Extension 113 Scheduled for 1pm FA00. FIRE ALARM 10/29/2025 10/30/2025 10/30/2025 FIRE Approved FINAL Extension 113 FS06. 09/02/2025 ABOVEGROUND 1pm 09/03/2025 09/03/2025 BUILDING Approved COVER FS06. 09/02/2025 ABOVEGROUND 1pm 09/03/2025 FIRE Assigned COVER Plan Reviews Date Review Type Description Assigned To Review Status 06/30/2025 FIRE SPRINKLER BUILDING Approved 06/30/2025 FIRE SPRINKLER No comments, KS & LT PW-ADMIN-GIS Approved 06/30/2025 FIRE SPRINKLER No comments, Gus PW-WAT-REV Approved Development 06/30/2025 FIRE SPRINKLER No civil concerns Approved Services Manager Fees Fee Description Notes Amount Enter 1 if permit is for: fire alarm, or fire Web Only - Fire System Plan Review $200.00 sprinkler Processing/Technology $25.00 Fire Sprinkler System Commercial NFPA 13/13R $175.00 Total $400.00 Attached Letters Date Letter Description 07/08/2025 Building Permit 06/30/2025 Web Form - Building Application Payments Date Paid By Description Payment Type Accepted By Amount XBP Conf: 06/30/2025 $200.00 235735112 XBP Conf: 07/08/2025 $200.00 236457489 Outstanding Balance $0.00 Uploaded Files Date File Name 07/08/2025 27231097-20250630_BLD6592_Approved Plans.pdf 07/08/2025 27231096-2025_BLD6592_Issued Permit.pdf 06/30/2025 2227e15915f20f8e0bb04961290428c8_viking_vk3001_qr_upright_k5.6.pdf 06/30/2025 6ace531e1908d5ab2178f4b1b3d3a09c_viking_vk3021_ssp_5.6k.pdf 06/30/2025 32a9894083995ae54d6e5e5a647f7d73_12645013-fire_sprinkler.pdf 06/30/2025 69ba11a7f31ba4a3d4905e47c57f808f_reliable_rascoflex_sprinkler_connections.pdf 06/30/2025 e2f71cd2d59fda129dd58f41ca9910f5_2025526_hangtime_cafe_outpost_bldg_6-signed.pdf