HomeMy WebLinkAbout238 N Olympic Ave_BLD6409_2025 PERMIT FEE WAIVER REQUEST
Community & Economic Development
City of Arlington • 18204 59th Ave NE • Arlington, WA 98223 • Phone (360) 403-3551
PER THE CURRENT FEE RESOLUTION
Section 1. Fees and Charges—General.
1.1 Fees. Fees are intended to cover the normal, recurring costs associated with providing a
given service. Fees are non-refundable.
1.2 Prices. In some instances, the City provides certain goods and merchandise for sale. Prices
for these goods may be included in this resolution.
1.3 Payment Due. Fees are due at the time the action is requested (e.g., at time of application)
or occurs (e.g., prior to a specific action). An applicant may pay all fees of a multi-phased
project in advance; however, doing so does not vest applicable fees due. Fees due are those
in effect at the time the specific action or phase of an action is requested or occurs.
1.4 Waivers. Upon petition by the applicant, the City Council may waive any of the fees, or
portions thereof, for any non-profit organization or government agency.
NOTE: State Surcharge Fees cannot be waived.
Permit Number: Total Amount: $
Staff Requesting Fee Waiver: Staff Department:
Staff Email: Staff Phone #:
Reason for Waiver:
Council Workshop Date: Council Approval Date:
Signatory Authority:
Print Name:
CED STAFF USE ONLY
FEE BREAKDOWN
Plan Review Fee(s) $
Permit Fee(s) $
Processing Technology Fee $
State Surcharge Fee $
Other: $
Other: $ ACCEPTED BY DATE STAMP
REV5.2021 Page 1 of 1
Permit #: 6409
Permit Date: 03/14/25
Permit Type: COMMERCIAL RE-ROOF
Project Name: City of Arlington
Applicant Name: S&S Roofing, LLC
Applicant Address: 104 S West Ave
Applicant, City, State, Zip: Arlington, WA 98223
Contact: Jami King
Phone: 360-386-9903
Email: jamisandsroofing@hotmail.com
Scope of Work: Coat over the top of the existing metal roof with RC2000 Prem Liq Rubber
Valuation: 73995.00
Square Feet: 0
Number of Stories: 2
Construction Type:
Occupancy Group:
ID Code:
Permit Issued: 05/05/2025
Permit Expires: 10/31/2025
Form Permit Type: COMMERCIAL RE-ROOF
Status: COMPLETE
Assigned To: Kristin Foster
Property
Parcel # Address Legal Description Owner Name Owner Phone Zoning
CITY OF 184
31051100103500 238 N OLYMPIC AVE
ARLINGTON GOVERNMENT
Contractors
Contractor Primary Contact Phone Address Contractor Type License License #
104 S West CONSTRUCTION
S&S Roofing LLC jamisandroofing@hotmail.com 3603869903 COA 602 934 849
Ave CONTRACTOR
104 S West CONSTRUCTION Construction
S&S Roofing LLC jamisandroofing@hotmail.com 3603869903 SSROOSR918MM
Ave CONTRACTOR Contractor
Inspections
Date Inspection Type Description Scheduled Date Completed Date Inspector Status
R00.1 RE-ROOF
08/29/2025 09/04/2025 09/02/2025 BUILDING Approved
FINAL
Fees
Fee Description Notes Amount
Processing/Technology ($25.00)
State Surcharge - Commercial Commercial Only ($25.00)
Re-Roof Commercial Plan Review Plan Review ($100.00)
Re-Roof Commercial Table 4.1 ($1,221.83)
Processing/Technology $25.00
Re-Roof Commercial Table 4.1 $1,221.83
State Surcharge - Commercial Commercial Only $25.00
Re-Roof Commercial Plan Review Plan Review $100.00
Total $0.00
Attached Letters
Date Letter Description
05/05/2025 Building Permit
Notes
Date Note Created By:
08/29/2025 sent expiration notice Hannah Hardwick
05/02/2025 Permit Fees were waived by Council. Kristin Foster
03/14/2025 Emailed for additional information regarding the address. Kristin Foster
Uploaded Files
Date File Name
05/05/2025 25771648-20250505_BLD6409_IssuedPermit.pdf
03/14/2025 24909357-20250311_City of Arlington 234 permit.pdf
This safety data sheet was created pursuant to the requirements of:
US OSHA Hazard Communication Standard (29 CFR 1910.1200)
SAFETY DATA SHEET Revision Date 11/27/2024 Version 1
1. Identification
Product identifier
Product Name RC 2000 SEBS Roof Coating
Other means of identification
Product Code RC 2000
UN/ID no. UN 1993
Synonyms Roof Coating
Recommended use of the chemical and restrictions on use
Recommended Use A white solvent-based coating used to repair asphalt, modified bitumen, metal, Kynar,
concrete, PVC, and EPDM roofs.
Restrictions on use N/A
Details of the supplier of the safety data sheet
Supplier Address
Inland Coatings
1320 Litton Drive
Salisbury, North Carolina
28147 704-932-3054
Emergency telephone number
Emergency Telephone Call CHEMTREC Day or Night:
Within USA and Canada: 1-800 424-9300
2. Hazard(s) identification
Classification
Flammable liquids Category 3
Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 2A
Carcinogenicity Category 1B
Reproductive toxicity Category 1A
Specific target organ toxicity (single exposure) Category 3
Aspiration hazard Category 1
Hazards not otherwise classified (HNOC)
Not applicable.
Label elements
Date: 11/27/2024 Production Name RC 2000 1
Danger
Hazard statements
Flammable liquid and vapor.
Causes skin irritation.
Causes serious eye irritation.
May cause cancer.
May damage fertility or the unborn child.
May cause respiratory irritation. May cause drowsiness or dizziness.
May be fatal if swallowed and enters airways.
Precautionary Statements - Prevention
Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood.
Wear protective gloves/clothing and eye/face protection.
Wash face, hands and any exposed skin thoroughly after handling.
Avoid breathing dust/fume/gas/mist/vapors/spray.
Use only outdoors or in a well-ventilated area.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Keep container tightly closed.
Ground and bond container and receiving equipment.
Use explosion-proof electrical/ ventilating / lighting/equipment.
Use only non-sparking tools.
Take action to prevent static discharges.
Keep cool.
Precautionary Statements - Response
IF exposed or concerned: Get medical advice/attention.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
If skin irritation occurs: Get medical advice/attention.
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower.
Wash contaminated clothing before reuse.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
IF SWALLOWED: Immediately call a POISON CENTER or doctor.
Do NOT induce vomiting.
In case of fire: Use CO2, dry chemical, or foam to extinguish.
Precautionary Statements - Storage
Store locked up.
Store in a well-ventilated place. Keep container tightly closed.
Precautionary Statements - Disposal
Dispose of contents/container to an approved waste disposal plant.
Other Information
No information available.
3. Composition/information on ingredients
Substance
Date: 11/27/2024 Production Name RC 2000 2
Not applicable.
Mixture
Synonyms Roof Coating.
Chemical name CAS No. Weight-% Trade secret
Calcium Carbonate 1317-65-3 20-30 *
Petroleum distillates, hydrotreated light 64742-47-8 10-20 *
Hydrocarbon Resin 68132-00-3 10-20 *
Styrene/Butadiene Copolymer 66070-58-4 10-20 *
Solvent Naphtha 64742-95-6 10-20 *
n-Propyl bromide 106-94-5 0-10 *
Titanium Dioxide 13463-67-7 0-10 *
Hydrated Aluminum-Magnesium Silicate 12174-11-7 0-10 *
*The exact percentage (concentration) of composition has been withheld as a trade secret.
4. First-aid measures
Description of first aid measures
General advice IF exposed or concerned: Get medical advice/attention. Show this safety data sheet to the
doctor in attendance. Immediate medical attention is required.
Inhalation Remove to fresh air. Aspiration into lungs can produce severe lung damage. If breathing
has stopped, give artificial respiration. Get medical attention immediately. Avoid direct
contact with skin. Use barrier to give mouth-to-mouth resuscitation. If breathing is difficult,
(trained personnel should) give oxygen. Delayed pulmonary edema may occur.
Eye contact Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep
eye wide open while rinsing. Do not rub affected area. Remove contact lenses, if present
and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Skin contact Wash off immediately with soap and plenty of water while removing all contaminated clothes
and shoes. Get medical attention if irritation develops and persists.
Ingestion Do NOT induce vomiting. Rinse mouth. Never give anything by mouth to an unconscious
person. ASPIRATION HAZARD IF SWALLOWED - CAN ENTER LUNGS AND CAUSE
DAMAGE. If vomiting occurs spontaneously, keep head below hips to prevent aspiration.
Get immediate medical attention.
Self-protection of the first aider Remove all sources of ignition. Ensure that medical personnel are aware of the material(s)
involved, take precautions to protect themselves and prevent spread of contamination. Use
personal protective equipment as required. See section 8 for more information. Avoid direct
contact with skin. Use barrier to give mouth-to-mouth resuscitation. Avoid contact with skin,
eyes or clothing.
Most important symptoms and effects, both acute and delayed
Symptoms Difficulty in breathing. Coughing and/ or wheezing. Dizziness. May cause redness and
tearing of the eyes. Burning sensation. Inhalation of high vapor concentrations may cause
symptoms like headache, dizziness, tiredness, nausea and vomiting.
Effects of Exposure May cause cancer. May cause adverse reproductive effects - such as birth defect,
miscarriages, or infertility.
Indication of any immediate medical attention and special treatment needed
Date: 11/27/2024 Production Name RC 2000 3
Note to physicians Because of the danger of aspiration, emesis or gastric lavage should not be employed
unless the risk is justified by the presence of additional toxic substances.
5. Fire-fighting measures
Suitable Extinguishing Media Dry chemical. Carbon dioxide (CO2). Water spray. Alcohol resistant foam.
Unsuitable extinguishing media Do not scatter spilled material with high pressure water streams.
Specific hazards arising from the Risk of ignition. Keep product and empty container away from heat and sources of ignition.
chemical In the event of fire, cool tanks with water spray. Fire residues and contaminated fire
extinguishing water must be disposed of in accordance with local regulations.
Explosion data
Sensitivity to mechanical impact None.
Sensitivity to static discharge Yes.
Special protective equipment and Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear.
precautions for fire-fighters Use personal protection equipment.
6. Accidental release measures
Personal precautions, protective equipment and emergency procedures
Personal precautions Evacuate personnel to safe areas. Use personal protective equipment as required. See
section 8 for more information. Avoid contact with skin, eyes or clothing. Ensure adequate
ventilation. Keep people away from and upwind of spill/leak. ELIMINATE all ignition sources
(no smoking, flares, sparks or flames in immediate area). Pay attention to flashback. Take
precautionary measures against static discharges. All equipment used when handling the
product must be grounded. Do not touch or walk through spilled material.
Other information Ventilate the area. Refer to protective measures listed in Sections 7 and 8.
Methods and material for containment and cleaning up
Methods for containment Stop leak if you can do it without risk. Do not touch or walk through spilled material. A vapor
suppressing foam may be used to reduce vapors. Dike far ahead of spill to collect runoff
water. Keep out of drains, sewers, ditches and waterways. Absorb with earth, sand or other
non-combustible material and transfer to containers for later disposal.
Methods for cleaning up Take precautionary measures against static discharges. Dam up. Soak up with inert
absorbent material. Pick up and transfer to properly labeled containers.
Prevention of secondary hazards Clean contaminated objects and areas thoroughly observing environmental regulations.
7. Handling and storage
Precautions for safe handling
Advice on safe handling Use personal protection equipment. Avoid breathing vapors or mists. Keep away from heat,
hot surfaces, sparks, open flames and other ignition sources. No smoking. Use grounding
and bonding connection when transferring this material to prevent static discharge, fire or
explosion. Use with local exhaust ventilation. Use spark-proof tools and explosion-proof
equipment. Keep in an area equipped with sprinklers. Use according to package label
Date: 11/27/2024 Production Name RC 2000 4
instructions. Handle in accordance with good industrial hygiene and safety practice. Avoid
contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product.
Remove contaminated clothing and shoes. Take off contaminated clothing and wash before
reuse. In case of insufficient ventilation, wear suitable respiratory equipment.
Conditions for safe storage, including any incompatibilities
Storage Conditions Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat,
sparks, flame and other sources of ignition (i.e., pilot lights, electric motors and static
electricity). Keep in properly labeled containers. Do not store near combustible materials.
Keep in an area equipped with sprinklers. Store in accordance with the particular national
regulations. Store in accordance with local regulations. Store locked up. Keep out of the
reach of children. Store away from other materials.
8. Exposure controls/personal protection
Control parameters
Exposure Limits The following ingredients are the only ingredients of the product above the cut-off level (or
level that contributes to the hazard classification of the mixture) which have an exposure
limit applicable in the region for which this safety data sheet is intended or other
recommended limit. At this time, the other relevant constituents have no known exposure
limits from the sources listed here.
Chemical name ACGIH TLV OSHA PEL NIOSH
Calcium Carbonate - TWA: 15 mg/m3 total dust TWA: 10 mg/m3 total dust
1317-65-3 TWA: 5 mg/m3 respirable TWA: 5 mg/m3 respirable
fraction dust
(vacated) TWA: 15 mg/m3
total dust
(vacated) TWA: 5 mg/m3
respirable fraction
n-Propyl bromide TWA: 0.1 ppm - -
106-94-5
Titanium Dioxide TWA: 0.2 mg/m3 nanoscale TWA: 15 mg/m3 total dust IDLH: 5000 mg/m3
13463-67-7 respirable particulate matter (vacated) TWA: 10 mg/m3 TWA: 2.4 mg/m3 CIB 63 fine
TWA: 2.5 mg/m3 finescale total dust TWA: 0.3 mg/m3 CIB 63
respirable particulate matter ultrafine, including engineered
nanoscale
Hydrated Aluminum-Magnesium TWA: 1 mg/m3 respirable - -
Silicate particulate matter
12174-11-7
Appropriate engineering controls
Engineering controls Showers
Eyewash stations
Ventilation systems.
Individual protection measures, such as personal protective equipment
Eye/face protection Tight sealing safety goggles.
Hand protection Wear suitable gloves. Impervious gloves.
Skin and body protection Wear suitable protective clothing. Long sleeved clothing. Chemical resistant apron.
Antistatic boots.
Date: 11/27/2024 Production Name RC 2000 5
Respiratory protection Appropriate respiratory protection should be selected and used according to the chemical
nature, hazards and use of this product and safety requirements of the local jurisdiction. If
exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be
required.
General hygiene considerations Do not eat, drink or smoke when using this product. Contaminated work clothing should not
be allowed out of the workplace. Regular cleaning of equipment, work area and clothing is
recommended. Wash hands before breaks and immediately after handling the product.
Wear suitable gloves and eye/face protection. Avoid contact with skin, eyes or clothing.
9. Physical and chemical properties
Information on basic physical and chemical properties
Physical state Liquid
Appearance Viscous
Color White
Odor Solvent
Odor threshold N/A
Property Values Remarks • Method
pH No data available 7.0
pH (as aqueous solution) None known
Melting point/freezing point No data available Product does not freeze.
Boiling point / boiling range No data available
Flash point 27 °C / 80.6 °F Pensky-Martens Closed Cup (PMCC)
Evaporation rate Butly acetate = 1
Flammability (solid, gas)
Flammability Limit in Air Not flammable
Upper flammability limit: No data available
Lower flammability limit: No data available
Vapor pressure No data available. 2.33 mmHg
Vapor density No data available
Relative density Water = 1g/ml
Water solubility No data available Reacts with water to form carbon dioxide
Solubility(ies) No data available. Insoluable
Partition coefficient No data available. .
Autoignition temperature No data available
Decomposition temperature
Kinematic viscosity
Dynamic viscosity No data available. @ 25 °C
Other information
Explosive properties No information available
Oxidizing properties No information available
Softening point N/A
Molecular weight N/A
VOC Content (%) Less than 550 g/l.
Density ~10lbs/gal
Bulk density N/A
10. Stability and reactivity
Reactivity No information available.
Chemical stability Stable under normal conditions.
Possibility of hazardous reactions None under normal processing.
Conditions to avoid Heat, flames and sparks.
Date: 11/27/2024 Production Name RC 2000 6
Incompatible materials Strong acids. Strong bases. Strong oxidizing agents.
Hazardous decomposition products None known based on information supplied.
11. Toxicological information
Information on likely routes of exposure
Product Information
Inhalation Specific test data for the substance or mixture is not available. Aspiration into lungs can
produce severe lung damage. May cause pulmonary edema. Pulmonary edema can be
fatal. May cause irritation of respiratory tract. May cause drowsiness or dizziness.
Eye contact Specific test data for the substance or mixture is not available. May cause irritation. Causes
serious eye irritation. (based on components). May cause redness, itching, and pain.
Skin contact Repeated exposure may cause skin dryness or cracking. Specific test data for the
substance or mixture is not available. Causes skin irritation. (based on components).
Ingestion Specific test data for the substance or mixture is not available. Potential for aspiration if
swallowed. May cause lung damage if swallowed. Aspiration may cause pulmonary edema
and pneumonitis. May be fatal if swallowed and enters airways. Ingestion may cause
gastrointestinal irritation, nausea, vomiting and diarrhea.
Symptoms related to the physical, chemical and toxicological characteristics
Symptoms Difficulty in breathing. Coughing and/ or wheezing. Dizziness. Redness. May cause redness
and tearing of the eyes. Inhalation of high vapor concentrations may cause symptoms like
headache, dizziness, tiredness, nausea and vomiting.
Acute toxicity .
Numerical measures of toxicity
The following values are calculated based on chapter 3.1 of the GHS document
ATEmix (inhalation-gas) 99,999.00 ppm
11547 7634 28438 ml/m3 Vapor Estimated 20
Component Information
Chemical name Oral LD50 Dermal LD50 Inhalation LC50
Petroleum distillates, hydrotreated light > 5000 mg/kg ( Rat ) > 2000 mg/kg ( Rabbit ) > 5.2 mg/L ( Rat ) 4 h
64742-47-8
Solvent Naphtha = 8400 mg/kg ( Rat ) > 2000 mg/kg ( Rabbit ) = 3400 ppm ( Rat ) 4 h
64742-95-6
n-Propyl bromide > 2000 mg/kg ( Rat ) > 2000 mg/kg ( Rat ) = 14374 ppm ( Rat ) 4 h
106-94-5
Titanium Dioxide > 10000 mg/kg ( Rat ) - = 5.09 mg/L ( Rat ) 4 h
13463-67-7
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Skin corrosion/irritation Classification based on data available for ingredients. Causes skin irritation.
Serious eye damage/eye irritation Classification based on data available for ingredients. Causes serious eye irritation.
Date: 11/27/2024 Production Name RC 2000 7
Respiratory or skin sensitization No information available.
Germ cell mutagenicity No information available.
Carcinogenicity Contains a known or suspected carcinogen. Classification based on data available for
ingredients. May cause cancer.
The table below indicates whether each agency has listed any ingredient as a carcinogen.
Chemical name ACGIH IARC NTP OSHA
n-Propyl bromide A3 Group 2B Reasonably Anticipated X
106-94-5
Titanium Dioxide A3 Group 2B - X
13463-67-7
Hydrated Aluminum-Magnesium - Group 2B - X
Silicate
12174-11-7
Legend
ACGIH (American Conference of Governmental Industrial Hygienists)
A3 - Animal Carcinogen
IARC (International Agency for Research on Cancer)
Group 2B - Possibly Carcinogenic to Humans
NTP (National Toxicology Program)
Reasonably Anticipated - Reasonably Anticipated to be a Human Carcinogen
Occupational Safety and Health Administration of the US Department of Labor
X - Present
Reproductive toxicity Classification based on data available for ingredients. May damage fertility or the unborn
child.
STOT - single exposure May cause respiratory irritation. May cause drowsiness or dizziness.
STOT - repeated exposure No information available.
Target organ effects Respiratory system, Eyes, Skin, Lungs.
Aspiration hazard May be fatal if swallowed and enters airways.
Other adverse effects N/A.
Interactive effects No information available.
12. Ecological information
Ecotoxicity
Chemical name Algae/aquatic plants Fish Toxicity to Crustacea
microorganisms
Petroleum distillates, - LC50: =45mg/L (96h, - -
hydrotreated light Pimephales promelas)
64742-47-8 LC50: =2.2mg/L (96h,
Lepomis macrochirus)
Date: 11/27/2024 Production Name RC 2000 8
LC50: =2.4mg/L (96h,
Oncorhynchus mykiss)
Solvent Naphtha - LC50: =9.22mg/L (96h, - EC50: =6.14mg/L (48h,
64742-95-6 Oncorhynchus mykiss) Daphnia magna)
n-Propyl bromide - LC50: =67.3mg/L (96h, - -
106-94-5 Pimephales promelas)
Persistence and degradability N/A.
Bioaccumulation There is no data for this product.
Other adverse effects No information available.
13. Disposal considerations
Waste treatment methods
Waste from residues/unused Should not be released into the environment. Dispose of in accordance with local
products regulations. Dispose of waste in accordance with environmental legislation.
Contaminated packaging Empty containers pose a potential fire and explosion hazard. Do not cut, puncture or weld
containers.
14. Transport information
DOT Regulated UN1993, Flammable Liquid, N.O.S.,(Naphtha) 3,PGIII
UN/ID no. UN 1993
Packing Group III
TDG Regulated
UN/ID no. UN 1993
Packing Group III
MEX Regulated
UN/ID no. UN 1993
Packing Group III
IATA Regulated
UN number or ID number UN 1993
Packing Group III
IMDG Regulated
UN number or ID number UN 1993
Packing Group III
15. Regulatory information
International Inventories
TSCA All of the components of this product are listed on the US TSCA (Toxic Substances Control
Act) Inventory or are exempt.
Date: 11/27/2024 Production Name RC 2000 9
Chemical name CAS No. Inventory Listing Status Commercial Activity
Designation
Calcium Carbonate 1317-65-3 Present Active
Petroleum distillates, hydrotreated light 64742-47-8 Present Active
Hydrocarbon Resin 68132-00-3 Present Active
Styrene/Butadiene Copolymer 66070-58-4 Present Active
Solvent Naphtha 64742-95-6 Present Active
n-Propyl bromide 106-94-5 Present Active
Titanium Dioxide 13463-67-7 Present Active
Hydrated Aluminum-Magnesium 12174-11-7 - Unknown *
Silicate
*Contact supplier for details. One or more substances in this product are either not listed on the US TSCA inventory, listed on the
confidential US TSCA inventory or are otherwise exempted from inventory listing requirements
DSL/NDSL All of the components of this product are listed on the DSL.
EINECS/ELINCS All components are listed.
TCSI Contact supplier for inventory compliance status.
Legend:
TSCA - United States Toxic Substances Control Act Section 8(b) Inventory
DSL/NDSL - Canadian Domestic Substances List/Non-Domestic Substances List
EINECS/ELINCS - European Inventory of Existing Chemical Substances/European List of Notified Chemical Substances
ENCS - Japan Existing and New Chemical Substances
IECSC - China Inventory of Existing Chemical Substances
KECL - Korean Existing and Evaluated Chemical Substances
PICCS - Philippines Inventory of Chemicals and Chemical Substances
AICS - Australian Inventory of Chemical Substances
NZIoC - New Zealand Inventory of Chemicals
TCSI - Taiwan Chemical Substance Inventory
US Federal Regulations
SARA 313
Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product contains a chemical
or chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372.
Chemical name SARA 313 - Threshold Values %
n-Propyl bromide - 106-94-5 0.1
SARA 311/312 Hazard Categories
Should this product meet EPCRA 311/312 Tier reporting criteria at 40 CFR 370, refer to Section 2 of this SDS for appropriate
classifications.
CWA (Clean Water Act)
This product does not contain any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40
CFR 122.42).
CERCLA
This material, as supplied, contains one or more substances regulated as a hazardous substance under the Comprehensive
Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302).
Chemical name Hazardous Substances RQs Extremely Hazardous Reportable Quantity (RQ)
Substances RQs
n-Propyl bromide 1 lb - RQ 1 lb final RQ
106-94-5 RQ 0.454 kg final RQ
Date: 11/27/2024 Production Name RC 2000 10
US State Regulations
California Proposition 65
This product contains the following Proposition 65 chemicals:.
Chemical name California Proposition 65
n-Propyl bromide - 106-94-5 Carcinogen
Developmental
Female Reproductive
Male Reproductive
Titanium Dioxide - 13463-67-7 Carcinogen
Hydrated Aluminum-Magnesium Silicate - 12174-11-7 Carcinogen
U.S. State Right-to-Know Regulations
Chemical name New Jersey Massachusetts Pennsylvania
Calcium Carbonate X X X
1317-65-3
n-Propyl bromide X X X
106-94-5
Titanium Dioxide X X X
13463-67-7
U.S. EPA Label Information
EPA Pesticide Registration Number Not applicable
16. Other information
NFPA Health hazards 2 Flammability 3 Instability 0 Special hazards -
HMIS Health hazards 2 * Flammability 3 Physical hazards 0 Personal protection X
Chronic Hazard Star Legend * = Chronic Health Hazard
Key or legend to abbreviations and acronyms used in the safety data sheet
Legend
SVHC: Substances of Very High Concern for Authorization:
PBT: Persistent, Bioaccumulative, and Toxic (PBT) Substances
vPvB: Very Persistent and very Bioaccumulative (vPvB) Substances
STOT: Specific Target Organ Toxicity
ATE: Acute Toxicity Estimate
LC50: 50% Lethal Concentration
LD50: 50% Lethal Dose
Legend Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
TWA TWA (time-weighted average) STEL STEL (Short Term Exposure Limit)
Ceiling Maximum limit value * Skin designation
+ Sensitizers
Key literature references and sources for data used to compile the SDS
Agency for Toxic Substances and Disease Registry (ATSDR)
U.S. Environmental Protection Agency ChemView Database
European Food Safety Authority (EFSA)
Environmental Protection Agency
Acute Exposure Guideline Level(s) (AEGL(s))
U.S. Environmental Protection Agency Federal Insecticide, Fungicide, and Rodenticide Act
U.S. Environmental Protection Agency High Production Volume Chemicals
Food Research Journal
Date: 11/27/2024 Production Name RC 2000 11
Hazardous Substance Database
International Uniform Chemical Information Database (IUCLID)
National Institute of Technology and Evaluation (NITE)
Australia National Industrial Chemicals Notification and Assessment Scheme (NICNAS)
NIOSH (National Institute for Occupational Safety and Health)
National Library of Medicine's ChemID Plus (NLM CIP)
National Library of Medicine’s PubMed database (NLM PUBMED)
U.S. National Toxicology Program (NTP)
New Zealand's Chemical Classification and Information Database (CCID)
Organization for Economic Co-operation and Development Environment, Health, and Safety Publications
Organization for Economic Co-operation and Development High Production Volume Chemicals Program
Organization for Economic Co-operation and Development Screening Information Data Set
World Health Organization
Disclaimer
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the
date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage,
transportation, disposal and release and is not to be considered a warranty or quality specification. The information
relates only to the specific material designated and may not be valid for such material used in combination with any other
materials or in any process, unless specified in the text.
Date: 11/27/2024 Production Name RC 2000 12
Technical Data Sheet
RC 2000 SEBS Roof Coating
DESCRIPTION: PRECAUTIONS:
RC 2000 provides extremely effective protection for various roof surfaces. It controls PREVENTION: Obtain special instructions before
corrosion and has high solar reflectance for increased energy savings Can be applied to use. Do not handle until all safety precautions have
metal buildings and other conventional substrates (with extra precautions taken). been read and understood. Wear protective gloves/
clothing and eye/face protection. Wash face, hands
SUITABLE SUBSTRATES: and any exposed skin thoroughly after handling. Avoid
• Metal breathing dust/fume/gas/mist/vapors/spray. Use only
• EPDM outdoors or in a well-ventilated area. Keep away from
• Aged TPO heat, hot surfaces, sparks, open flames and other
• Concrete ignition sources. No smoking. Keep container tightly
• BUR closed. Ground and bond container and receiving
• Granulated Modified Bitumen equipment. Use explosion-proof electrical/ventilating/
• New Spray Polyurethane Foam lighting/equipment. Use only non-sparking tools.
Take action to prevent static discharges. Keep cool.
INSTALLATION INSTRUCTION: RESPONSE: IF exposed or concerned: Get medical
SURFACE PREPARATION: The surface must be free of any oils, moisture, rust scale, soil advice/attention. Specific treatment (See Section 4 of
or other contaminates that may interfere with good adhesion. Remove any loose material this SDS). IF IN EYES: Rinse cautiously with water for
from seams or other surfaces with a wire brush or scraper. Oil and grease should also several minutes. Remove contact lenses, if present and
be removed with an appropriate cleaner. In many cases high pressure water blast will be easy to do. Continue rinsing. If eye irritation persists:
sufficient to prepare the surface. Get medical advice/attention. If skin irritation occurs:
APPLICATION INSTRUCTIONS: Apply only when ambient temperatures are 50°F and Get medical advice/attention. IF ON SKIN (or hair): Take
rising, and substrate temperatures do not exceed greater than 130°F. For best spray off immediately all contaminated clothing. Rinse skin
application, the product should be at a minimum of 60°F. Lower temperatures can be with water/ shower. Wash contaminated clothing before
utilized for brush/rolling applications. When exceeding 24-wet mils or using dark colors, reuse. IF INHALED: Remove person to fresh air and keep
the likelihood of blistering increases. comfortable for breathing. IF SWALLOWED: Immediately
call a POISON CENTER or doctor. Do NOT induce
vomiting. In case of fire: Use CO2, dry chemical, or foam
PACKAGING: to extinguish.
5-gal metal pail 53 lbs. 36-per pallet STORAGE & HANDLING PROCEDURES:
55-gal metal drum 567 lbs. 4-per pallet Store locked up. Store in a well-ventilated place. Keep
container tightly closed. Shelf life is 24-months if
stored in original unopened containers. Store between
TECHNICAL DATA: 45°F and 95°F. Do not heat with an open flame. All
containers must be sealed when not in use. Wear
Viscosity @ 78° 3,500 cps protective gloves, protective clothing, eye protection,
and face protection. If exposed or concerned: Get
Permeance < 1 perm
medical advice or attention. Clean equipment and any
Solids (% by weight) 45% over-spray with AldoThinner.
Weight (lb./gal.) 9.9 lbs WARRANTY & DISCLAIMER:
Elongation 700% Inland Coatings, Inc. (Inland) warrants that this product
conforms to the published product specifications as
Tensile Strength 1100 psi of the date of manufacture. Inland does not make,
nor does it authorize anyone to make, any warranty
VOC Content < 550 g/l
of merchantability or fitness for any purpose, or any
Flashpoint 103°F other warranty, guarantee, or representation. INLAND
HEREBY DISCLAIMS ANY AND ALL EXPRESS, IMPLIED,
Solar Reflectance 0.84 OR STATUTORY WARRANTIES. The sole obligation of the
manufacturer, distributor, and/or seller of this product
Thermal Emittance 0.9
shall be the replacement of product proven to be
SRI Value 105 defective in manufacturing if written notice is received
within one year of the date of purchase. There shall be
Shelf Life 24-months
no liability for injury, loss, or damages, either direct or
Standard Color(s) White, Tan Gray consequential, arising out of the use or inability to use
this product. Failure to notify the manufacturer prior
to remedy or resolution voids the warranty and the
manufacturer’s liability.
Rev. 12/24
Inlandcoatings.com 1320 Litton Drive| Salisbury, NC 28147 | 704-932-3054